• Applied Science and Convergence Technology
• /
• v.24 no.6
• /
• pp.242-244
• /
• 2015

ZnO:Ga thin films were deposited by RF magnetron sputtering technique from ZnO (3 wt.% $Ga_2O_3$) target onto glass substrates under various RF power. The influence of RF power on the structural, electrical, and optical properties of ZnO:Ga thin films was investigated by X-ray diffraction, atomic force microscopy, Hall method and optical transmission spectroscopy. As the RF power increases from 50 to 110W, the crystallinity is deteriorated, the root main square surface roughness is decreased and the sheet resistance is increased. The increase of sheet resistance is caused by decreasing carrier concentration due to interstitial Ga ion. All films are transparent up to 80% in the visible wavelength range and the adsorption edge is a red-shift with increasing RF power.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.282-282
• /
• 2010

We report a new method of fabrication of polydiacetylene nanowire using liquid bridge-mediated nanotransfer molding (LB-nTM), a direct patterning method for the formation of two- or three-dimensional structures with feature sizes between tens of nanometers and tens of micron over large areas with various materials from a molder to a substrate via a liquid bridge between them. First, we fabricate assembled diacetylene monomer nanowire on the substrate then make it polymerize using 254nm UV-light irradiation. The Polydiacetylene nanowires have been investigated by UV-visible absorption spectroscopy, atomic force microscopy (AFM), and scanning electron microscopy (SEM).

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.141-141
• /
• 2004

다이아몬드상 탄소(diamond-like carbon, DLC) 박막은 명칭에 함축된 의미로 알 수 있듯이 다이아몬드와 유사한 특징을 지니고 있다. DLC 박막은 비정질(amorphous) 고상 탄소 박막으로 구조적으로 Sp$^1$, Sp$^2$, Sp$^3$의 결합들로 구성되어 있다. DLC 박막의 물성으로는 우수한 경도, 내마모성, 낮은 마찰계수, 화학적 안정성 그리고 적외선(IR) 영역에서의 높은 투과율 등이 있다. 현재 DLC 박막은 앞서 열거된 물성들의 장점을 활용하여 다양한 산업분야에서 활발히 응용되고 있다.(중략)

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.82-82
• /
• 2011

본 연구에서는 이온빔 스퍼터링 방법으로 증착한 Cr2O3, Ta2O5, HfO2 산화물박막의 구조적 특성변화를 관찰하였다. 금속박막에서 표면이 산화되는 문제를 해결하기위하여 산화물 박막을 증착시켰다. 이온빔 스퍼터링으로 박막 증착 시 산화물 타겟을 사용할 때 발생되는 전하의 영향을 상쇄하기 위하여 neutralizer를 사용하였다. 박막 증착 후 XRR (X-ray Reflectometer)을 이용하여 박막의 두께, 거칠기 및 밀도를 확인하였으며, AFM (Atomic Force MicroScope)을 통하여 증착한 박막표면 거칠기 측정을 하여 XRR로 얻은 데이터와 비교하여 살펴보았다. 또한 XPS (X-ray photoelectron spectroscopy)측정을 통해 제조된 박막의 화학적 결합상태를 확인하였다. 여러 가지 조건변화와 기판의 차이에 따라 제작된 산화물 박막 중 실리콘 기판을 사용하여 증착시킨 박막은 XRR측정시 반사율 곡선에서 자연 산화막에 의한 영향이 나타났다. 반면 glass나 sapphire에 증착시킨 산화물 박막은 실리콘기판에서 나타난 자연 산화막의 영향을 받지 않음을 확인하였다. 기판과 산화물 박막사이에 계면층에 나타나는 영향을 최소화시킴으로써 양질의 박막을 제작할 수 있을 것으로 기대된다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.315-315
• /
• 2011

The ring formation and electronic properties of furan adsorbed on graphene layers grown on 6H-SiC(0001) has been investigated using atomic force microscopy (AFM), near edge X-ray absorption fine structure (NEXAFS) spectra for the C K-edge, and high resolution photoemission spectroscopy (HRPES). Moreover, we observed that furan molecules adsorbed on graphene could be used for chemical functionalization via the lone pair of electrons on the oxygen group, allowing chemical doping. We also found that furan spontaneously formed rings with one of three different bonding configurations and the electronic properties of the ring formed by furan on graphene can be described using by AFM, NEXAFS and HRPES, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.459-459
• /
• 2011

Graphene has many fascinating material properties such as high electron mobility, high optical transparency, excellent thermal conductivity, superior Young's modulus, etc. Several studies have recently found that single-layer graphene is chemically more reactive than few-layer graphene when supported on silicon dioxide substrates with sub-nm roughness. In this study, we have investigated the influence of substrates on chemical reactivity of graphene. Morphology and thermal oxidation behavior of graphene on atomically flat mica substrates were studied by atomic force microscopy (AFM) and Raman spectroscopy compared to graphene on SiO2/Si substrates. Notably, oxidation of single-layer graphene proceeds more slowly on mica than SiO2/Si. Detailed analysis led to a conclusion that deformation along the out-of-plane direction enhances reactivity of graphene.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.175-179
• /
• 1996

Ferroelectric SrBi$_2$Ta$_2$$O_{9}$ thin films were fabricated by tole Sol-Gel method using a spin-on coating with MOD(Metal Organic Dccomposition) solution on Pt/Ti/SiO$_2$/Si(100) substratcs. The films were anncalcd at 80$0^{\circ}C$ for one hour in oxygen atmosphere. The effects of Bi/Ti mole ratios on crystalline orientations, surface morphologies, and subface composition SBT thin films with a Bi/Ta mole ratios from 1.1 to 1.3 were investigated using X-ray Diffractometry (XRD). Atomic Force (AFM), X-Ray Photoelectron Spectroscopy(XPS). Ferroelectric properties of these films were also measured.d.

• Proceedings of the KIEE Conference
• /
• 2000.11c
• /
• pp.458-460
• /
• 2000

We attempted to fabricate polyurethane derivatives (PU-CN, PU-DCM) LB films by using LB method. Also, we investigated the monolayer behavior at the air-water interface by surface pressure-area ($\pi$-A) isotherms. And, the surface morphologies and the physicochemical properties of LB films were investigated by atomic force microscopy (AFM) and UV-vis spectroscopy, respectively. Also, the electrical properties of polyurethane derivatives LB films were investigated by using the conductivity, the dielectric constant and activation energy. In the surface morphologies, physicochemical, electrical properties of polyurethane derivatives LB films, the properties is different as to the Polyurethane derivatives, it is considered that this phenomena could be described by the difference of lumophore pendant which was adhered at PU main chain.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.209-214
• /
• 2012

In this work, the reduced graphene nanosheets were synthesized from pre-exfoliated graphite flakes. The pristine graphite flakes were firstly pre-exfoliated to graphite nanoplatelets in the presence of acetic acid. The obtained graphite nanoplatelets were treated by Hummer's method to produce graphite oxide sheets and were finally exfoliated to graphene nanosheets by ultrasonication and reduction processes. The prepared graphene nanosheets were studied by X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), atomic force microscopy (AFM), and transmission electron microscopy (TEM). From the results, it was found that the preexfoliation process showed significant influence on preparation of graphite oxide sheets and graphene nanosheets. The prepared graphene nanosheets were applied to the preparation of conductive materials, which yielded a greatly improved electrical resistance of $200{\Omega}/sq$.

• Korean Journal of Crystallography
• /
• v.19 no.1
• /
• pp.25-30
• /
• 2008

In order to characterize the optical properties of CdS thin films and CdS powders, the following experiments were performed: CdS wurtzite thin films were made using 99.99% CdS (Aldrich) powder and the $AlO_x$ membranes in $7{\times}10^{-6}$ torr(here, the average vacuum coating speed is $1{\AA}/sec$.). The surface states of CdS nano-particles with dimensions of 3.87 nm were studied through the fluorescence spectroscopy. From the resulting spectra exhibited, we can see a sharp fluorescence at 451 nm arising from the excitons on the CdS thin films, compared with the 448nm peak of the CdS powders.