• 한국정밀공학회지
• /
• 제15권11호
• /
• pp.9-20
• /
• 1998

In recent manufacturing process, the increase of productivity has been attempted by reducing machining time with the increase of cutting force. However, the excessive increase of cutting force can cause tool breakage and have a bad effect on both manufacturing machine and workpiece. Thus, it is necessary to estimate and control the cutting force in real time during the process. In this study, use of disturbance observer is proposed for the indirect cutting force estimation. The estimated cutting force is used for the real-time control of feedrate, making the actual cutting force follow the reference force command. Since the suggested method does not need an expensive sensor like a dynamometer, the method is expected to be used practically. Since the actual cutting force follow the reference force, resulting the reducing of the machining time the increase of productivity are also expected, and the quality of cutting surface has been improved due to the adjusted feedrate. Besides, an actual constant cutting force guarantees the prevention of tool breakage. To show the effectiveness of the suggested cutting force control method, an experimental setup has been made without sensor and applied to several workpieces. Experiments show that the suggested method is effective to cutting force control of a CNC machining center.

• 한국자동차공학회논문집
• /
• 제11권3호
• /
• pp.214-219
• /
• 2003

This paper includes real-time tractive force estimation method using standard vehicle sensors such as wheel speed, brake pressure, throttle position, engine speed, and transmission carrier speed sensor. Engine map, torque converter lookup table, shaft torque observer, and brake gain adaptation method are used to estimate the tractive force. To verify this estimator, measurement which uses strain-based brake torque sensor and estimation results are presented. All results was performed using a real vehicle in a real-time.

• 제어로봇시스템학회논문지
• /
• 제17권10호
• /
• pp.1014-1020
• /
• 2011

This presents a motion and force estimation system of human fingers by using an Electromyography (EMG) sensor module and a data glove system to be proposed in this paper. Both EMG sensor module and data glove system are developed in such a way to minimize the number of hardware filters in acquiring the signals as well as to reduce their sizes for the wearable. Since the onset of EMG precedes the onset of actual finger movement by dozens to hundreds milliseconds, we show that it is possible to predict the pattern of finger movement before actual movement by using the suggested system. Also, we are to suggest how to estimate the grasping force of hand based on the relationship between RMS taken EMG signal and the applied load. Finally we show the effectiveness of the suggested estimation system through several experiments.

• Structural Engineering and Mechanics
• /
• 제34권1호
• /
• pp.1-14
• /
• 2010

The innovative intelligent fuzzy weighted input estimation method which efficiently and robustly estimates the unknown time-varying input force in on-line is presented in this paper. The algorithm includes the Kalman Filter (KF) and the recursive least square estimator (RLSE), which is weighted by the fuzzy weighting factor proposed based on the fuzzy logic inference system. To directly synthesize the Kalman filter with the estimator, this work presents an efficient robust forgetting zone, which is capable of providing a reasonable compromise between the tracking capability and the flexibility against noises. The capability of this inverse method are demonstrated in the input force estimation cases of the plate structure system. The proposed algorithm is further compared by alternating between the constant and adaptive weighting factors. The results show that this method has the properties of faster convergence in the initial response, better target tracking capability, and more effective noise and measurement bias reduction.

• 한국정밀공학회지
• /
• 제26권8호
• /
• pp.132-141
• /
• 2009

In this paper, we describe finger force estimation from surface electromyogram (sEMG) data for intuitive and delicate force control of robotic devices such as exoskeletons and robotic prostheses. Four myoelectric sites on the skin were found to offer favorable sEMG recording conditions. An artificial neural network (ANN) was implemented to map the sEMG to the force, and its structure was optimized to avoid both under- and over-fitting problems. The resulting network was tested using recorded sEMG signals from the selected myoelectric sites of three subjects in real-time. In addition, we discussed performance of force estimation results related to the length of the muscles. This work may prove useful in relaying natural and delicate commands to artificial devices that may be attached to the human body or deployed remotely.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.497-498
• /
• 2012

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.553-554
• /
• 2009

• 대한조선학회논문집
• /
• 제40권5호
• /
• pp.43-52
• /
• 2003

Two methods which estimate manoeuvring derivatives in the model of hydrodynamic force and moment acting on a manoeuvring ship using sea trial data were compared. One is the widely used parameter estimation method by using the Extended Kalman Filter (EKF), which estimates state variables of linearized state space model at every instant after dealing with the coefficients as the augmented state variables. The other one is the Estimation-Before-Modeling (EBM) technique, so called the two-step method. In the first step, hydrodynamic force of which dynamic model is assumed the third-order Gauss-Markov process is estimated along with motion variables by the EKF and the modified Bryson-Frazier smoother. Then, in the next step, manoeuvring derivatives are identified through the regression analysis. If the exact structure of hydrodynamic force could be known, which was an ideal case, the EKF method would be regarded as being more superior compared to the EBM technique. However the EBM technique was more robust than the EKF method from a realistic point of view where the assumed model structure was slightly different from the real one.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.47.1-47
• /
• 2001

The drilling process has a great importance for the production technology due to its widerspread use in the manufacturing industry. In order to enhance a maximum production rate and prevent the drill from the damage, it is important to monitor and control the drilling system. Thrust force and cutting torque are the main output variables in the design of drilling control systems. In this paper, an alternative estimation method of thrust force by using flexible neural networks is proposed. Flexible neural network uses the sigmoid activation function with adjustable parameter in order to enhance the approximation accuracy ...

• 한국소음진동공학회논문집
• /
• 제14권6호
• /
• pp.503-511
• /
• 2004

본 연구에서는 푸리에 모델, 확률 모델, 그리고 Newmark 설계 스펙트럼 방법과 같은 응답예측 모델을 사용하여 속도의존형 감쇠장치에 의해 제어되는 구조물의 응답과 제어기의 최대제어력을 예측하였다. 이를 위해, 유사 속도로부터 실제 속도를 예측하는 방법이 제안되었으며, 이 방법은 감쇠장치에 의해 증가되는 감쇠비의 실제속도에 대한 효과를 고려한다. 시간이력해석결과는 정확한 최대제어력을 예측하기 위해서는 실제속도가 사용되어야 하며, 제안된 방법에 의해 수정된 Newmark 설계 스펙트럼이 가장 전 주기구간에 걸쳐 정확한 예측 값을 산정함을 보여준다.