• Journal of Satellite, Information and Communications
• /
• v.12 no.4
• /
• pp.78-86
• /
• 2017

Japan has a lot of interest about weapons systems development of surrounding national and has invested heavily in securing intelligence assets to get information about them, because of conflict issues between Japan and Russia with four northern islands, China with Senkaku Islands and entry policy into the Pacific. Japan has used a large budget to detect and intercept ballistic missile for reasons of the launch of the Taepodong missile in 1998. After took over SIGINT equipments which U.S. force had operated in 1950s~1960s, Japan made a technological analysis and advanced IT technology to produce superior equipments. Japan's SDF has installed them in 19 locations across Japan. In addition, Japan's JASDF has installed advanced early warning RADAR to detect aircraft and high speed ballistic missile entering JADIZ with S-band in 28 locations across Japan. It is possible to detect missile launch preparations, engine tests, and launch moments at any time for operation of 6 satellites high resolution reconnaissance system and 6 aegis ships. In close cooperation with the US, Japan is accessible to the SBIRS networks which detects the launch of a ballistic missile in neighboring countries. In the future, Because the United States wants Japan to act as part of the United States in East, south Asia, it is believed that the exchange of intelligence on the surrounding countries between two countries will be enhanced.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.34-37
• /
• 2006

When tsunami waves propagate across open ocean they are steered by Coriolis force and refraction due to gentle gradients in the bathymetry on scales longer than the wavelength. When the wave encounters steep gradients at the edges of continental shelves and at the coast, the wave becomes non-linear and conservation of momentum produces squirts of surface current at the head of submerged canyons and in coastal bays. HF coastal ocean radar is well-conditioned to observe the current bursts at the edge of the continental shelf and give a warning of 40 minutes to 2 hours when the shelf is 50-200km wide. The period of tsunami waves is invariant over changes in bathymetry and is in the range 2-30 minutes. Wavelengths for tsunamis (in 500-3000 m depth) are in the range 8.5 to over 200 km and on a shelf where the depth is about 50 m (as in the Great Barrier Reef) the wavelengths are in the range 2.5 - 30 km. It is shown that the phased array HF ocean surface radar being deployed in the Great Barrier Reef (GBR) and operating in a routine way for mapping surface currents, can resolve surface current squirts from tsunamis in the wave period range 20-30 minutes and in the wavelength range greater than about 6 km. There is a trade-off between resolution of surface current speed and time resolution. If the radar is actively managed with automatic intervention during a tsunami alert period (triggered from the global seismic network) then it is estimated that the time resolution of the GBR radar may be reduced to about 2 minutes, which corresponds to a capability to detect tsunamis at the shelf edge in the period range 5-30 minutes. It is estimated that the lower limit of squirt velocity detection at the shelf edge would correspond to a tsunami with water elevation of less than 5 cm in the open ocean. This means that the GBR HF radar is well-conditioned for use as a monitor of small and medium scale tsunamis, and has the potential to contribute to the understanding of tsunami genesis research.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.8
• /
• pp.615-625
• /
• 2014

Ministry of National Defense, MND, established a "Master Plan of Military Facility" in 2010 based on the defense reform to prepare for future war. It was a plan for consolidating small military facilities into battalion units, reflecting on and preparing for the needs of various changes in defense environment as well as balanced growth of ROK Army, Navy, and Air Force. However, to move forward with "Military Facility Master Plan," current design criteria for military facilities need to be revised to be enacted due to numerous calculation errors in facility footprints because of the absence of a sound facility criteria. Because the future war environment will be changed from Platform basis to Network Centric Warfare basis, Command & Control capability of C4I systems is getting more important. Therefore, Successful mission accomplishment can be secured by convergence of facility and military Information Technology(IT). So, MND should quickly prepare for the operational guidance, design criteria and policy that are suitable for Network Centric Warfare accomplishment, and implement infrastructure of IT and installation of C2 facility in conjunction with consolidation movement of military facilities. In this paper, we propose the defense I3A framework in order to solve this problem.

• Convergence Security Journal
• /
• v.17 no.4
• /
• pp.69-78
• /
• 2017

Since the September 11, 2001, transnational crimes and terrorism have increased, the importance of border security has been emphasized and integrated CIQ capability has been required. The U.S., Canada, and Australia are consolidating CIQ to strengthen border security, focusing on strengthening travelers and goods immigration control and airports, ports and land border security. In 2003, the U.S. established the Customs and Border Protection(CBP) under the Department of Homeland Security. Canada also established the Canada Border Services Agency(CBSA) under the Public Safety Canada in 2003. The Australian Customs and Border Protection Service was integrated with the Department of Immigration and Border Protection(DIBP) and the Australian Border Force was established in 2015. However, Korea operates a distributed border management system for each CIQ task which is unable to respond to complex border threats such as illegal immigration, entry of terrorists, smuggling of drugs, and gun trade in the airports, ports and land borders. In order to solve this problem, it is possible to consider integrating sequentially the customs and quarantine services which have high similarities, and to integrate the entire CIQ tasks with the Korea Customs Service delegated to the immigration control duties in the mid to long term. There is also a plan to benchmark the CIQ single accountability agencies in the U.S., Canada, and Australia in accordance with the Korean situation and to establish a new integrated border security organization.

• Corrosion Science and Technology
• /
• v.9 no.6
• /
• pp.276-280
• /
• 2010

Copper(Cu) as an interconnecting metal layer can replace aluminum (Al) in IC fabrication since Cu has low electrical resistivity, showing high immunity to electromigration compared to Al. However, it is very difficult for copper to be patterned by the dry etching processes. The chemical mechanical polishing (CMP) process has been introduced and widely used as the mainstream patterning technique for Cu in the fabrication of deep submicron integrated circuits in light of its capability to reduce surface roughness. But this process leaves a large amount of residues on the wafer surface, which must be removed by the post-CMP cleaning processes. Copper corrosion is one of the critical issues for the copper metallization process. Thus, in order to understand the copper corrosion problems in post-CMP cleaning solutions and study the effects of DC biases and post-CMP cleaning solution concentrations on the Cu film, a constant voltage was supplied at various concentrations, and then the output currents were measured and recorded with time. Most of the cases, the current was steadily decreased (i.e. resistance was increased by the oxidation). In the lowest concentration case only, the current was steadily increased with the scarce fluctuations. The higher the constant supplied DC voltage values, the higher the initial output current and the saturated current values. However the time to be taken for it to be saturated was almost the same for all the DC supplied voltage values. It was indicated that the oxide formation was not dependent on the supplied voltage values and 1 V was more than enough to form the oxide. With applied voltages lower than 3 V combined with any concentration, the perforation through the oxide film rarely took place due to the insufficient driving force (voltage) and the copper oxidation ceased. However, with the voltage higher than 3 V, the copper ions were started to diffuse out through the oxide film and thus made pores to be formed on the oxide surface, causing the current to increase and a part of the exposed copper film inside the pores gets back to be oxidized and the rest of it was remained without any further oxidation, causing the current back to decrease a little bit. With increasing the applied DC bias value, the shorter time to be taken for copper ions to be diffused out through the copper oxide film. From the discussions above, it could be concluded that the oxide film was formed and grown by the copper ion diffusion first and then the reaction with any oxidant in the post-CMP cleaning solution.

• Polymer(Korea)
• /
• v.33 no.4
• /
• pp.377-383
• /
• 2009

Ionic polymer-metal composite (IPMC) actuator generates bending actuation via ion/water flux to the cathode side under an electric field. Polyelectrolytes in IPMC should possess high water-retention capability, proton conductivity, and Young's modulus. In this study. for endowing IPMCs with these properties, Nafion-alumina composite membranes containing $\alpha$- or $\gamma$-aluminas of $4{\sim}8$ wt% were prepared. Mechanical moduli of Nafion-alumina composite membranes were $7{\sim}3$ MPa higher than that of Nafion, with the slight decrease in proton conductivity. At DC 3 V. the actuation performance of the Nafion-$\alpha$-alumina (8 wt%)-IPMC was superior to that of the typical Nafion-IPMC. exhibiting 2.7 times the displacement with an enhanced blocking force. The enhanced actuation performance with the Nafion-$\alpha$-alumina composite membranes was attributed to the higher proton conductivity, the elevated ion/water flux, and the lower interfacial electric resistance of platinum electrodes and membrane, compared with those containing $\gamma$-alumina.

• Strategy21
• /
• s.44
• /
• pp.352-376
• /
• 2018

Through this research, the current state of naval coordination and guidance of shipping is reviewed whereupon which a suggestion is made for a novel role which satisfies the needs of the people and the country asked of the Navy. Taking into consideration the dynamic security environment, the developing relationship between the two nations on the Korean peninsula, and the influence that the Republic of Korea has on maritime security, it is made more urgent that the Navy takes a proactive course of action in terms of naval coordination and guidance of shipping. The current form of Korean naval coordination and guidance of shipping is adapted from the logical and flexible concepts of NCAPS and NCAGS and is one of many tasks that the Republic of Korea Navy must perform. However, when the Republic of Korea Navy develops blue-water capabilities with the ambitions of protecting its people and their way of life, naval coordination and guidance of shipping could potentially become one of the primary functions of the Republic of Korea Navy that the it must champion. Already, there are indications that foreign navies are, through many developments and commitment towards naval coordination and guidance of shipping, protecting its people and states' interests wherever is necessary. In the case of Chile, its Navy has taken the helm of naval coordination and guidance of shipping and has integrated various maritime organizations including the coast guard and the National Customs Service for the sake of maintaining regional maritime security, showing immediate force if necessary. Presently, as the Republic of Korea Navy looks to be a global naval power, it is important that a reprioritization of the Navy's mission is undertaken, all the while sustaining military readiness posture on the Northern Limit Line. It cannot be any more emphasized how crucial thorough military readiness posture is as a natural stance against the enemy. That being said, contributing towards international maritime security is consistent with the nation's standing. It is a fact that maritime security has been conceptualized and developed merely as a study within the Ministry of Maritime Affairs and Fisheries, the Republic of Korea Navy, and other governmental organizations, forces, and academia. Naval cooperation and guidance of shipping suggested by this research as a practical operational field is a concrete solution to what once was an abstract concept. To stand firm on its status as a maritime nation, the Republic of Korea must establish a Maritime Security Organization within its Navy and develop the appropriate doctrines. Attaining experts, developing doctrines, and cultivating the capability to deploy maritime forces will allow for the Republic of Korea to execute a primary role in keeping international maritime security and naval coordination and guidance of shipping. To fully achieve its latent potential necessitates the Republic of Korea Navy to expedite the introduction of naval coordination and guidance of shipping concepts and to establish the appropriate doctrines, operation plans, and organizations.

• Strategy21
• /
• s.44
• /
• pp.177-212
• /
• 2018

The purpose of this article is to examine the 'Discussion of maritime defense' which began to be discussed from the late Goryeo dynasty to the early Joseon dynasty and the process of establishing a maritime defense system. Also it can identify changes in the aspects of the naval ship operation and their strategic tactics during the reign of King Sejong. Japanese raiders began a full-scale invasion from 1350 at the late Goryeo Dynasty, So the government realized the need to raise the 'Sea power' and to organize the maritime defense system for defending enemy invasion. for example, the reinforcement of naval forces, construction of warships, develoment of weapon systems and so on. which have achieved remarkable growth while continuing, have also been used to carry out a three-time 'Conquest of Daemado' in 1389, 1396, 1419. Until then, however, it is difficult to interpret that the naval forces had a systematic and organizational combat operation system. According to fighting patterns on combat reports before the early days of King Sejong's reign, Our naval forces had no advantage over the Japanese raiders in terms of their capabilities and tactics. Then, the period of King Sejong marked a watershed in maritime defense history. Based on accumulated experience of naval battles and force Projections, The paradigm shift of the naval strategic tactics for maritime defense has occurred. First, the capability of the naval vessels has improved. for example, ship speed, durability, and weather resistance. Through these efforts, navy forces were able to pursue and attack, destroy enemy's ships by taking advantage of the 'Ship speed superiority'. This has led to tactical shifts from defensive to offensive. Second, purpose to support offensive tactics, the government put a strategic plan into practice that is the forward depolyment of naval bases from the inland to the coast, considering the 'sea environment' and 'threat'. By doing so, Joseon dynasty was able to secure 'the command of the sea'. This may be a little different from the perception of the so-called 'peace period' that King Sejong's era. We need to remember that Joseon dynasty was working hard for its defense. When studying history of maritime defense, these strategic and tactical elements must be fully considered. Only then we can have a coherent understanding of the many naval battles in the past, including the Imjin War(1592-1598).

• The Journal of Natural Sciences
• /
• v.11 no.1
• /
• pp.119-130
• /
• 1999

As Japanese economy has been well developed, the manpower problem of farmland has also become one of the largest and the most crucial issues in the overall agricultural policy of the Japanese Government. Particularly, the energetic younger generation and a core of agricultural labor force, has drastically decreased, while the weak older generation has increased. The severity of manpower shortage in agricultural sector led to create a farmer training programs which had been vigorously begun by the Yamagata Prefecture, and a center for promoting local autonomy. The major purpose of education for enhancement of status of future farmers as well as the welfare of core farmhousehold is to provide them with technical of vocational education to give training to those who want to become agricultural technicians, rural leaders of practical farmers Educational program for future and young farmers put emphasis on practical trainings which are directly applied to proper farm management. As a supporting policy for promoting future farmers' activities, Prefecture-level supports were strengthened to develop technical capability, managerial and supervisory ability, and the ability to lead organized activity so that the farm youth may operate modern farms with higher efficiency and greater specialization. Political consideration was also made to develop a rich sense of farm management as well as the adaptability necessary to introduce technical and managerial innovations. Methological measurements on how the Korean government has to do for solving the problem of agricultural manpower facing in farmland in Korea were noted.

• Journal of Convergence for Information Technology
• /
• v.9 no.8
• /
• pp.140-147
• /
• 2019

The purpose of this study is to find biomechanical parameters for optimal shoes production through an ergonomic usability assessment of five existing types of shoes preferred by B-BOY. Ten experts and ten non-experts participated in the experiment, and 12 infrared cameras (Qualis, Oqus), force plate (Kistler, 9286AA) and foot pressure plate (Zebris Gmbh, Zebris PDM-System) were used to obtain the data. The results of the study are as follows. First, P shoes with a friction coefficient of 0.38 and a free moment of 0.32 N/m/kg are desirable in terms of traction capability and safety. Second, on the cushion, it was found that the N shoes 2.51 N, sec/kg and non-expert, and 2.86 N and sec/kg were suitable. Third, it is deemed appropriate for C shoes with a forefoot average pressure of 10.11 KPa (right), 10.05 KPa (left), and V shoes with a rearfoot average pressure of 8.4 KPa (right) and 8.36 KPa (left). In conclusion, the combination of the structure and material of V shoes should be developed for traction and stability, N shoes for cushion, and walking balance for C and V shoes.