• Wind and Structures
• /
• 제18권4호
• /
• pp.347-373
• /
• 2014

Since its development in the early 1980's the force balance technique has become a standard method in the efficient determination of structural loads and responses. Its usefulness lies in the simplicity of the physical model, the relatively short records required from the wind tunnel testing and its versatility in the use of the data for different sets of dynamic properties. Its major advantage has been the ability to provide results in a timely manner, assisting the structural engineer to fine-tune their building at an early stage of the structural development. The analysis of the wind tunnel data has evolved from the simple un-coupled system to sophisticated methods that include the correction for non-linear mode shapes, the handling of complex geometry and the handling of simultaneous measurements on multiple force balances for a building group. This paper will review some of the components in the force balance data analysis both in historical perspective and in its current advancement. The basic formulation of the force balance methodology in both frequency and time domains will be presented. This includes all coupling effects and allows the determination of the resultant quantities such as resultant accelerations, as well as various load effects that generally were not considered in earlier force balance analyses. Using a building model test carried out in the wind tunnel as an example case study, the effects of various simplifications and omissions are discussed.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.310-319
• /
• 2017

충격파 시험장치를 이용하여 추력을 측정하는 방법을 소개하였다. 충격파 시험장치를 이용하여 엔진의 추력을 측정하기 위해서는 일반적인 엔진시험 시설에서 추력을 측정하기 위해 사용하는 밸런스가 힘의 평형상태에 도달하지 못하기 때문에 응력파 힘 밸런스(Stress Wave Force Balance) 방법을 이용하여 측정한다. 본 논문에서는 모델 힘 밸런스(force balance)에 대해 충격하중을 주고 유한요소법(FEM)으로 변형률을 계산하였다. 충격하중과 변형률의 관계를 역합성곱(de-convolution)하여 천이함수를 도출하였다.

• 한국표면공학회지
• /
• 제35권2호
• /
• pp.129-137
• /
• 2002

The purpose of solderability assessment is to predict the effectiveness of soldering process. It is important for companies pursuing zero defects manufacturing because poor solderability is the major cause of two third of soldering failures. The most versatile solderability method is wetting balance method. However, there exist so many indices for wettability in the wetting balance test e.g. time to reach 2/3 values of maximum wetting force, tine to reach zero wetting force, maximum withdrawal force. In this study, three solderability assessment methods, which were the maximum withdrawal force, the wetting balance and the dynamic contact angle (DCA), were evaluated by comparing each other. The wetting balance technique measures the solderability by recording the forces exerted from the specimen after being dipped into the molten solder. Then the force at equilibrium state can be used to calculate a contact angle, which is known as static contact angles. The DCA measures contact angles occurred during advancing and withdrawing of the specimen and the contact angles are known as dynamic contact angles. The maximum withdrawal force uses the maximum force during withdrawal movement and then a contact angle can be calculated. In this study, the maximum withdrawal force method was found to be an objective index for measuring the solderability and the experiment results indicated good agreement between the maximum withdrawal force and the wetting balance method.

• 근관절건강학회지
• /
• 제18권1호
• /
• pp.16-27
• /
• 2011

Purpose: The purpose of this study was to investigate the effects of a visual feedbackbased balance training, using force platform biofeedback, on the postural balance of elderly faller. Methods: Fifty one community-dwelling older adults (aged 66-88 years) with a recent history of fall participated in the study. Participants were randomized to an experimental group (EG, n=25) and to a control group (CG, n=26). The EG participated in training sessions three times/week for 6 weeks. Visual feedbackbased balance training with the a computerized force platform with visual feedback screen was used in the experimental group. Static balance (center of gravity) and dynamic balance (Functional reach test, Timed "Up & Go" test, Berg balance scale) were assessed before and after end of training. Results: A significant improvement in static balance and dynamic balance were demonstrated within the EG (p<.05), but not in the CG. Conclusion: Visual feedback-based balance training may be an effective intervention to improve postural balance of elderly fallers.

• 한국전문물리치료학회지
• /
• 제23권3호
• /
• pp.40-47
• /
• 2016

Background: Assessments of Sit-to-Stand (STS) and gait functions are essential procedures in evaluating level of independence for the patients after stroke. In a previous study, we developed the software to analyze center of pressure (COP) in standing position on Wii Balance Board (WBB). Objects: This purpose of this study is to measure test-retest reliability of ground reaction forces, COP and time using WBB on STS and gait in healthy adults. Methods: Fifteen healthy participants performed three trials of STS and gait on WBB. The time (s), vertical peak (%) and COP path-length (cm) were measured on both tasks. Additionally, counter (%), different peak (%), symmetry ratio, COP x-range and COP y-range were analyzed on STS, 1st peak (%), 2nd peak (%) of weight were analyzed on gait. Intra-class correlation coefficient (ICC), standard error measurement (SEM) and smallest real difference (SRD) were analyzed for test-retest reliability. Results: ICC of all variables except COP path-length appeared to .676~.946 on STS, and to .723~.901 on gait. SEM and SRD of all variables excepting COP path-length appeared .227~8.886, .033~24.575 on STS. SEM and SRD excepting COP path-length appeared about .019~3.933, .054~11.879 on gait. Conclusion: WBB is not only cheaper than force plate, but also easier to use clinically. WBB is considered as an adequate equipment for measuring changes of weight bearing during balance, STS and gait test which are normally used for functional assessment in patients with neurological problems and elderly. The further study is needed concurrent validity on neurological patients, elderly patients using force plate and WBB.

• 마이크로전자및패키징학회지
• /
• 제26권3호
• /
• pp.1-6
• /
• 2019

Wettability is an important factor to decide solderability of solder, flux, other soldering-related materials and soldering conditions. The wettability also affects the reliability of solder joint. Wetting balance test is a good method for quantitatively measuring wettability between solder and substrate. The wetting balance test is easy to reproduce the wetting experiment and to measure the wetting time and force. And this test provides wetting curve to calculate the surface tension of the molten solder. Development of new solder has been continued in accordance with various and harsh environment in the electronics industry. In this paper, the principle of wetting balance test and recent research issues including nano-composite solder are explained.

• 대한물리치료과학회지
• /
• 제27권2호
• /
• pp.88-95
• /
• 2020

Background: In the present study to investigate the immediate effects of standing position of the trunk stabilization exercise on Guillain-Barre syndrome patient's balance and gait abilities were examined. Design: Case report and conducted as a single-blind. Methods: Standing position of trunk stabilization exercise was conducted for five Guillain-Barre syndrome patient's who met the selection criteria were recruited. The subjects were conducted conservative exercise and trunk stabilization exercise. Conservative exercise was implemented for thirty min, five times for 8 weeks, and trunk stabilization exercise was implemented for 15 min. The participants' balance was measured via force plate (COP), functional reach test (FRT), timed up and go test (TUG), gait was measured using the 10 m walk test, and 6 minute walk test. Results: After training, the change values of the balance and gait ability in the subjects were significantly greater than pre-test. participants showed significant improvements in COP, FRT, TUG, 10 m walk test and 6 minute walk test pre and post the training (p<0.05). Conclusions: standing position of the trunk stabilization exercise was effective on Guillain-Barre syndrome patient's balance (COP, FRT, TUG) and gait (10 m walk test and 6 minute walk test) abilities were examined.

• International Journal of Aeronautical and Space Sciences
• /
• 제1권2호
• /
• pp.68-74
• /
• 2000

A comparative wind tunnel testing of an airplane model was performed at the Korea Aerospace Research Institute Low Speed Wind tunnel(KARI LSWT). The model used for the comparative test was a seaplane model from the Glenn L. Martin Wind(GLM) Tunnel of University of Maryland, U.S.A. The 6-component external balance used in force and moment measurement is pyramidal type, which is a precision device that has strain gauge-type load cell inside of balance and the virtual center of the balance coincides with the tunnel centerline. Image method is adopted to eliminate the tare and interference of the model support, and to correct the flow angularity to the model also. Test results from KARI LSWT were compared with the results from GLM tunnel.

• 대한물리치료과학회지
• /
• 제22권1호
• /
• pp.11-17
• /
• 2015

Purpose : The current study examines changes of static uprighting balance in the visual input characteristics. Method : Total 50 person(male 16, female 34) were participated in this study. They were tested with 'hole in the card' for identification of dominant eye's side, then they were divided 3 groups(both visual input group, dominant visual input group, and non-dominant visual input group). 3 groups were measured with Romberg test on the force platform device to compare the static uprighting balance characteristics ; moving distance, mean velocity, and sway area of the CoM(center of mass), during 20 seconds. Results : The results by one-way repeated measure ANOVA were as follows. In moving distance and mean velocity of CoM, non-dominant visual input group was unstable than dominant visual group and both visual input group(p<0.05). But, in sway area of CoM, significant difference was not existed statistically. Conclusion : These result can be applied to design the static uprighting balance program using visual input mediation.

• 한국생산제조학회지
• /
• 제23권6호
• /
• pp.561-568
• /
• 2014

Injection molding industries realize the necessity of developing family molds to improve competitiveness. One of the primary causes of manufacturing defective products is the imbalance of flow in a family mold. In this study, the family mold of a shelf for refrigerators is analyzed by using CAE software. First, the flow balance, clamping force, and injection pressure are analyzed for different gate diameters of two cavities. Second, the flow balance, clamping force, and injection pressure are improved when the two gate valves are open at different times. Finally, the results of filling analysis are compared with the test injection product.