• Proceedings of the Korean Society for Language and Information Conference
• /
• 2007.11a
• /
• pp.340-348
• /
• 2007

This paper deals with the complex verb formation of passive and potential predicates and syntactic structures projected by these verbs. Though both predicates are formed with the suffix -rare which has been assumed to originate from the same stem, they show significantly different syntactic behaviors. We propose two kinds of concatenation of base verbs and auxiliaries; passive verbs are lexically formed with the most restrictive mode of combination, while potential verbs are formed syntactically via more flexible combinatory operations of function composition. The difference in the mode of complex verb formation has significant consequences for their syntactic structures and semantic interpretations, including different combination with the honorific morphemes and subjectivization of arguments/adjuncts of base verbs. We also consider the case alternation phenomena and their implications for scope construals found in potential sentences, which can be accounted for in a unified manner in terms of the optional application of function composition.

• Journal of the Korean Solar Energy Society
• /
• v.22 no.2
• /
• pp.1-10
• /
• 2002

This study is a study on the building integrated method of Photovoltaic. It was analyzed into a basic installation condition and an integrated form in this study. And it was confirmed through the 3D simulation & drawing work of an integrated situation to the real domestic building. The Photovoltaic installation of the country to an optimal efficiency for the year must be installed to the due south with an angle of thirty degrees. And also a module spacing must be more than doubled from the bottom to the top of module to prevent from efficiency falling by a shadow of photovoltaic module in a roof setting of flat roof. If Photovoltaic module is an adequate material that is a basic requirement as a building's finishing material, it's not only an efficiency of alternation with an existing finishing material but also a building's design element.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.2
• /
• pp.73-79
• /
• 1999

Most of mechanical structures are combined of substructures such as beams and/or plates. There are few systems with unibody structures but are many systems with united body structures. Generally the dynamic a nalysis of whole structures is performed under alternation load. In the structure design, the analysis of each bolted joint is more important than others for zero severity. This paper presents the analysis method of contact stress distribution factor in the bolted joint with variable fastening torque on joints in the structure. At first, a static vibration test was performed to find out a nominal stress of bolt jointed plates from the relationship between natural frequency and nominal stress. Then a contact stress was computed at contact point between bolt and plate in the structure. It is believed that the proposed method has promisiong implications for safer design with index of contact stress distribution factor and has merits for cost-down and saving time at the beginning of vehicle development.

• Journal of the Korean Society for Railway
• /
• v.8 no.1
• /
• pp.101-109
• /
• 2005

Roller test rig is the test facility for acquiring the data related dynamic characteristics of rolling stocks handily. The test method using roller test rig could be convenient to Set information about hunting and others rather than using field test. However, adopting this method brings about the inconvenient calibration process for measured data. This kind of additional effort results from the difference of contact condition between field test and test roller rig. In this paper, the numerical approach is used to get the amount of calibration. The analysis results of the field test are compared with results of the roller test rig to know what kind of alternation happens according to the change of contact condition.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.10a
• /
• pp.93-96
• /
• 2004

This paper presents a study on defects in pearlite lamella structure of high carbon steel by means of finite-element method(FEM) simulation. High-carbon pearlite steel wire is characterized by its nano-sized microstructure feature of alternation ferrite and cementite. The likely fatigue crack is located on interface of the lamella structure where the maximum amplitude of the longitudinal shear stress and transverse shear stress was calculated during cyclic loading. The FEM is proposed for maximum shear stress from loading of lamella structure, and a method is predicted to analyze the likely fatigue crack generation. It is possible to obtain the important basic data which can be guaranteed in the ductility of high carbon steel wire by using FEM simulation.

• Language and Information
• /
• v.4 no.1
• /
• pp.83-96
• /
• 2000

In thihs paper, I investigate the different usage of a reflexive-anaphor or logophor. Some African languages which have a morphologically independent set of logophors give a clue to this dichotomy. English which does not have morphologically independent logophors employs a reflexive-self form to be used as a logophor. However, the logophors in English occur in restricted environments. On the other hand, Korean is freer than English in that it allows areflexive to be interchanged with a logophor. With this assumption, I deal with the binding in Optimality Theory. I set up the constraints-MAXlog,ana,MINlog,ana, and Ølog,ana. With these constraints, the binding in various languages are explained through constraint ranking. In addition, the long-distance binding in English is dealt with properly of we assume the dichotomy and constraint-ranking in Optimality Theory. Furthermore, this gives an explanation to reflexive and pronoun alternation in English. Also, I borrow from phonology the idea of Obligatory Contour Principle to explain the similar phenomenon in syntax. I compare English with Korean in dealing with the possessive reflexive with the recourse to The Emergence of the Unmarked Pronoun Bresnan 1997. Fnmally, the reconstruction phenomenon is accounted for with the same device.

• Structural Engineering and Mechanics
• /
• v.1 no.1
• /
• pp.31-46
• /
• 1993

The motivations of the application of shakedown analysis to the earthquake-resistant design of ductile moment-resisting steel structures are presented. The problems which must be solved with this application are also addressed. The illustrative results from a series of static and time history nonlinear analyses of one-bay three-story steel frame and the related discussions have shown that the incremental collapse may be the critical design criterion in case of earthquake loading. Based on the findings, it was concluded that the inelastic excursion mechanism for alternation load pattern, such as in earthquake, should be the sidesway mechanism of the whole structure for the efficient mobilization of the structural energy dissipating capacity and that the shakedown analysis technique can be used as a tool to ensure this mechanism.

• Transactions of Materials Processing
• /
• v.14 no.2 s.74
• /
• pp.133-138
• /
• 2005

This paper presents a study on defects in pearlite lamella structure of high carbon steel by means of finite-element method(FEM) simulation. High-carbon pearlite steel wire is characterized by its nano-sized microstructure feature of alternation ferrite and cementite. The likely fatigue crack is located on interface of the lamella structure where the maximum amplitude of the longitudinal shear stress and transverse shear stress was calculated during cyclic loading. The FEM is proposed for maximum shear stress from loading of lamella structure, and a method is predicted to analyze the likely fatigue crack generation. It is possible to obtain the important basic data which can be guaranteed in the ductility of high carbon steel wire by using FEM simulation.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.137-140
• /
• 2002

In this paper, a new algorithm for two-dimensional (2-D) finite-difference time-domain (FDTD) method is presented. By this new method, the maximum time step size can be increased over the Courant-Friedrich-Levy (CFL) condition restraint. This new algorithm is adapted from an Alternating-Direction Implicit FDTD (ADI-FDTD) method. However, unlike the ADI-FDTD algorithm. the alternation is performed with respect to the blocks of fields rather than with respect to each respective coordinate direction. Moreover. this method can be efficiently simulated with parallel computation. and it is more efficient than the conventional FDTD method in terms of CPU time. Numerical formulations are shown and simulation results are presented to demonstrate the effectiveness and efficiency of our proposed method.

• Language and Information
• /
• v.13 no.1
• /
• pp.39-56
• /
• 2009

This paper investigates ordering alternation phenomena in Korean using the dative construction data from Sejong Corpus of Modern Korean (Kim, 2000). The paper first shows that syntactic weight and information structure are distinct and independent factors that influence word order in Korean. Moreover, it reveals that heaviness and givenness compete each other and exert diverging effects on word order, which contrasts the converging effects of these factors shown in word orders of right-branching languages like English. The typological variation of syntactic weight effect poses interesting theoretical and empirical questions, which are discussed in relation to processing efficiency in ordering.