• Fashion & Textile Research Journal
• /
• v.10 no.1
• /
• pp.83-91
• /
• 2008

This study was designed to figure out the changes in elderly women's foot size and shape by aging, to propose size specification for elderly women's shoes, and to produce regression equations using representative measurements items to estimate other measurements usually hard to get. Subjects were 118 women of 30-59 years and the 227 elderly women over 60 years. Martin's anthropometry was done on the right foot of each subject for 25 items. And 11 indirect measurement items were measured on both foot printing sole outline and picture in profile taken by digital camera. For statistical analysis on the anthropometric measurements by SPSS program, analysis of variance, post-hoc test(SNK-test), crosstabulation, multiple correlation analysis, regression analysis were performed. The results of the study are as follows. Firstly, it was found that the foot figures of elderly women over 60 years were smaller in girth and width than those of below 60 years. In addition, it was revealed that a big toe and a little toe of elderly women showed a tendency concentrating to the central axis of feet. The foot index of elderly was smaller in width and girth. Secondly, foot size distribution table of elderly group showed wider size ranges and covered smaller sizes than the below the age of 60, meaning wide variation in foot size of elderly women. Thirdly, the multiple correlation analysis showed high correlation of foot length/girth to other measurements, suggesting these two items could be used as representative items for elderly women's shoe size specification as other age groups. Regression equations were produced using foot length/girth to estimate other measurements, suggesting such items could be estimated effectively and utilized in on/off-line shoe manufacturing shop as heel to big toe length, heel to little toe length, exterior malleouls width, instep girth, ankle girth, etc. These results imply prudent features of elderly women's foot as diversity of foot shape and wide size specification range should be applied for ergonomic shoe design for them.

• KSTLE International Journal
• /
• v.7 no.2
• /
• pp.51-55
• /
• 2006

In order to design an effective foot surface which can provide adequate friction for a self-propelled medical microrobot moving inside the small intestine, frictional mechanisms between the small intestine inner wall and the foot surface of the robot must be understood. In this paper, mechanical interlocking effect was considered to design the surface of the foot that can generate the desired frictional force. The concept of the design was derived from the hookworm that lives inside the small intestine. Hookwarms are known to adhere to the small intestine wall by interlocking with villi on the surface of the small intestine. The interlocking mechanism was considered as the main frictional mechanism for the design of the microrobot foot surface in this work. 2 mm and 6 mm diameter solid and hollow cylindrical shaped foot specimens were designed and tested to assess the frictional force between the specimens and the porcine small intestine specimen.

• The Korean Journal of Rehabilitation Nursing
• /
• v.6 no.2
• /
• pp.152-163
• /
• 2003

Purpose; This study was done to investigate the effect of foot reflexology on vital signs, general fatigue, foot fatigue, mood, and blood glucose levels in noninsulin dependent patients. Method: The Research design of this study was nonequivalent control group quasi-experimental design. 18 patients were assigned to the experimental group, 24 patients to the control group. The data were obtained diaberic patients with ambulatory endocrine outpatients clinic patients from 40 years old to 70 years old. Experimental groups received foot reflex massage for 30minutes three times/week every other days, and Control groups did not received foot reflex massage. The dependent variables were blood pressure, pulse rate, visual analogue scale for general fatigue, foot fatigue, mood, and blood sugar levels. Data were analyzed with $X^2$ test, t-test and repeated measure ANOVA at .0.05 level of significance. Results: There were significant difference in the pulse rate, general fatigue, foot fatigue and mood according to group and time between pre and post foot reflexology. But this research did not prove to decrease blood sugar levels. Conclusions : Foot reflexology can imorove pulse rate, general and foot fatigue, and mood status in diabetus patients. So further research need to explore the effect of decreasing of blood sugar levels.

• Journal of International Academy of Physical Therapy Research
• /
• v.11 no.1
• /
• pp.1992-1998
• /
• 2020

Background: The foot drop stimulator is designed to improve the walking ability of foot drop in patients after stroke, however, studies on clinical effects are still lacking. Objective: To investigate the effect of a foot drop stimulator on the walking and balancing abilities of foot drop patients after a stroke. Design: One-Group (Pretest-Posttest) Design. Methods: All subjects walked in all three conditions: foot drop stimulator (FDS) ankle foot orthosis (AFO) and barefoot. Primary outcome measures were assessed for walking and balance using a 10-m walking test (10MWT) and a timed up and go test (TUG). Secondary outcome measures consisted of a brief user interview, and the patients recorded the advantages and disadvantages of each condition. Results: FDS, AFO, and barefoot conditions showed a statistically significant difference in 10MWT and TUG (P<.001) as a result of comparing three conditions. FDS and AFO were significantly different from the barefoot condition as post-hoc results; however, there was no significant difference between the two conditions (P>.05). Conclusion: In this study, the foot drop stimulator contributed to improving the balance ability, and the walking ability was similar to the effect of the ankle-foot orthosis.

• Journal of Mechanical Science and Technology
• /
• v.14 no.6
• /
• pp.675-689
• /
• 2000

Rapid design and production techniques are indispensable for the custom-made production systems. For manufacturing custom-made shoes, the shoelast should be designed rapidly from the individual foot model. In this paper, we develop an integrated system for rapid design and manufacturing of custom-tailored shoes. The foot shape measurement sub-system allows scanning a standard shoelast and an individual foot and then extracts the three-dimensional crosssectional data of the shoelast and the human foot shape from the captured image data. The shoelast design sub-system uses the scanned data to design new customized shoelast curves or surfaces with the heeling and mixing algorithms built in this system. The pattern design subsystem provides a method, which transforms a shoe-upper surface designed by a stylist into a flat-pattern that can be manufactured. We also export the surface model to an NC machine to manufacture the physical shoelast model.

• Korean Journal of Computational Design and Engineering
• /
• v.16 no.1
• /
• pp.11-20
• /
• 2011

A structured beam laser is often used to scan object and make 3D model. Multiple cameras are inevitable to see occluded areas, which is the main reason of the high price of the scanner. In this paper, a low cost 3D foot scanner is developed using one camera and two mirrors. The camera and two mirrors are located below and above the foot, respectively. Occluded area, which is the top of the foot, is reflected by the mirrors. Then the camera measures 3D point data of the bottom and top of the foot at the same time. Then, the whole foot model is reconstructed after symmetrical transformation of the data reflected by mirrors. The reliability of the scan data depends on the accuracy of the parameters between the camera and the laser. A calibration method is also proposed and verified by experiments. The results of the experiments show that the worst errors of the system are 2 mm along x, y, and z directions.

• Journal of International Academy of Physical Therapy Research
• /
• v.11 no.2
• /
• pp.2060-2064
• /
• 2020

Background: Recently, the kinesiology taping (KT) method was reported to be effective in improving walking ability in foot drop patients after stroke, but the clinical basis is still unclear. Objectives: The KT method was compared with ankle-foot orthotics (AFO) to investigate gait ability in foot drop patients after stroke. Design: Crossover study design. Methods: In this study, 11 stroke patients with foot drop participated. Walking ability of all subjects for both conditions (KT and AFO) was measured using the GAITRite system. The order of application of the two conditions was determined randomly by drawing lots. Wilcoxon signed-rank test was used to compare walking ability between the two conditions. The level of statistical significance was set at P<.05. Results: There were no significant differences between the KT and AFO methods in terms of velocity, cadence, step length, and stride length (P>.05, all). Conclusion: This study recommends KT as an alternative to the AFO, since KT provides evidence of preventing of foot drops and improving gait ability in stroke patient.

• Journal of the Ergonomics Society of Korea
• /
• v.25 no.3
• /
• pp.17-24
• /
• 2006

In this paper, we propose a stress analysis on foot by lifting task attitudes. Maximum force and peak pressure were measured on 8 body regions by Pedar system in order to analysis the stress which is affected by task style and angle on foot when Manual Materials Handling task. As for the peak pressure of the whole foot as to the task height during the lifting task, the height from Knuckle to Shoulder was the least in the peak pressure. Also, as for the maximum force and the peak pressure of the whole foot as to the task angle during the lifting task, it could be seen that the more an angle increases, the stress influencing on a foot jumps. As for the maximum force and the peak pressure by foot region as to the task height in case of the lifting task, the height from Knuckle to Shoulder is indicated the smallest value in the maximum force and the peak pressure, thus there is necessary to attain the work design that considered this. Also, as for the maximum force by foot region as to the task angle in case of the lifting task, 0° tasking is indicated to be least, thus there is necessity to be attained the tasking design in a bid to prevent the existence of an angle. The results of this paper are thought to be helpful to the suitable work design, to the prevention of musculoskeletal disorders related to the lower limbs, and to the design of ergonomic safety shoes.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.411-412
• /
• 2022

In recent years, the number of foot disease patients is increasing due to bad walking habits and wearing shoes. With the development of shoes and living environment, no one can be relieved from foot disease. A study on the effect of shoe design characteristics on satisfaction and purchase intention when a patient with foot disease purchases orthopedic shoes. The shoe design characteristics consisted of functionality, convenience, and aesthetics. This study is conducted from various perspectives, such as frequency of participation in social activities, purpose of wearing, and status and characteristics of each foot disease. It is expected that the research results will lead to the development of orthopedic shoe designs that can be usefully worn by patients with orthopedic mild foot disease in their daily life, and to lead to practical use and satisfaction.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.5
• /
• pp.368-373
• /
• 2003

This paper presents a cost-effective 3D foot scanner system that provides the 3-dimensional point cloud foot data to design the custom footwear. To measure the 3-dimensional point cloud data of the foot, a CCD camera, a Non-Gaussian laser line projector and optical triangulation method are employed. Furthermore, the integrated system employs a measurement base, a frame grabber, a CCD moving cart, a stepping motor and a computer. The measurement result is saved as 3D dxf format and it could be converted to 2D essential data fer a shoe design. The experimental results demonstrate that the proposed system have the decent resolution of 1mm which is enough for last and shoe design.