• Food Science and Biotechnology
• /
• v.14 no.5
• /
• pp.698-699
• /
• 2005

Levels of fumonisins, mycotoxins produced by fungal species, must be accurately and rapidly monitored to ensure food safety. In this study, using surface plasmon resonance sensor, a batch-type biosensor was fabricated to detect fumonisin $B_1$. By applying this biosensor to fumonisin $B_1$ solutions of 0 to 6 ppm, a significant calibration model was developed for measurement. Coefficient of determination in regression analysis for the model was 0.920. Results indicate that detection of fumonisin $B_1$ by surface plasmon resonance biosensor was highly feasible.

• Food Science and Industry
• /
• v.54 no.1
• /
• pp.11-28
• /
• 2021

Air pollution caused by particulate matters (PM) has become a global issue. PM is known to threaten human health by causing respiratory and cardiovascular disease. PM can be introduced to human gastrointestinal track through food intake, causing inflammation and changes in gut microbiota. Even at low PM concentrations, prolonged exposure to PM can cause significant accumulation of PM in food products. The adsorption of PM onto food surfaces is expected to be strongly influenced by the properties of food surfaces, but few studies have been reported. This paper examines several important food surface properties that may affect the interactions between PM and food surfaces, including surface wettability, surface charge, and surface microstructure. Understanding the adsorption of PM onto food surfaces can provide useful guidance for classifying PM-sensitive foods and controlling food chains, including cultivation, processing, preservation, and cooking, to ensure food safety against PM.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.4
• /
• pp.779-789
• /
• 2013

This study aimed to investigate the emulsifying properties of bovine lactoferrin in food emulsion system. First, lactoferrin solution was prepared to study its surface activities, such as surface adsorption characteristics and ${\zeta}$-potential. Second, some physicochemical properties of lactoferrin emulsion which resulted from variations of environmental conditions (i.e., pH or NaCl addition) were determined. As for surface adsorption characteristics evaluated by surface tension, it was decreased with increasing lactoferrin concentration in solution ($1{\times}10^{-5}{\rightarrow}0.2wt%$) and showed a plateau (${\fallingdotseq}44$mN/m) above 0.01 wt%. It was also changed with pH and the minimum value of 53.8 mM/m was observed at pI of lactoferrin. This was related to changes in ${\zeta}$-potential of the lactoferrin solution with respect to pH. Fat globule size of lactoferrin emulsion was decreased with increasing lactoferrin concentration and a stable emulsion was formed above 0.5 wt% lactoferrin in emulsion with fat globule size $d_{32}$ of ca. 0.33 ${\mu}m$ as confirmed by creaming stability experiment (i.e., Turbiscan). As with surface tension, fat globule size of lactoferrin emulsion also changed with pH and showed a maximum value at pI. As evaluated by Turbiscan, in the presence of NaCl, the lactoferrin emulsion showed instability in particular above 10 mM.

• Journal of Microbiology and Biotechnology
• /
• v.29 no.2
• /
• pp.179-190
• /
• 2019

Bacillus subtilis spore surface display (BSSD) technology is considered to be one of the most promising approaches for expressing heterologous proteins with high activity and stability. Currently, this technology is used for various purposes, such as the production of enzymes, oral vaccines, drugs and multimeric proteins, and the control of environmental pollution. This paper presents an overview of the latest developments in BSSD technology and its application in protein engineering. Finally, the major limitations of this technology and future directions for its research are discussed.

• Journal of Animal Science and Technology
• /
• v.59 no.2
• /
• pp.4.1-4.5
• /
• 2017

Background: Biofilms were the third-dimensional structure in the solid surface of bacteria. Bacterial biofilms were difficult to control by host defenses and antibiotic therapies. Escherichia coli (E. coli) and Salmonella were popular pathogenic bacteria that live in human and animal intestines. Essential oils are aromatic oily liquids from plant materials and well known for their antibacterial activities. Method: This study was conducted to determine effect of essential oil on anti-biological biofilm formation of E. coli and Salmonella strains in in vitro experiment. Two kinds of bacterial strains were separated from 0.2 g pig feces. Bacterial strains were distributed in 24 plates per treatment and each plates as a replication. The sample was coated with a Bacterial biofilm formation was. Result: Photographic result, Escherichia coli (E. coli) and Salmonella bacteria colony surface were thick smooth surface in control. However, colony surface in blended and single essential oil treatment has shown crack surface layer compared with colony surfaces in control. Conclusion: In conclusion, this study could confirm that essential oils have some interesting effect on anti-biofilm formation of E. coli and Salmonella strains from pig feces.

• Food Science of Animal Resources
• /
• v.43 no.2
• /
• pp.374-381
• /
• 2023

In a previous study, 'response surface methodology (RSM) using a fullest balanced model' was proposed to improve the optimization of food processing when a standard second-order model has a significant lack of fit. However, that methodology can be used when each factor of the experimental design has five levels. In response surface experiments for optimization, not only five-level designs, but also three-level designs are used. Therefore, the present study aimed to improve the optimization of food processing when the experimental factors have three levels through a new approach to RSM. This approach employs three-step modeling based on a second-order model, a balanced higher-order model, and a balanced highest-order model. The dataset from the experimental data in a three-level, two-factor central composite design in a previous research was used to illustrate three-step modeling and the subsequent optimization. The proposed approach to RSM predicted improved results of optimization, which are different from the predicted optimization results in the previous research.

• Mycobiology
• /
• v.47 no.2
• /
• pp.250-255
• /
• 2019

In the present study, we aimed to determine the cause of surface film formation in three rice vinegars fermented using the traditional static fermentation method. The pH and total acidity of vinegar were 3.0-3.3 and 3.0-8.7%, respectively, and acetic acid was the predominant organic acid present. Colonies showing a clear halo on GYC medium were isolated from the surface film of all vinegars. Via 16S rDNA sequencing, all of the isolates were identified as Acetobacter pasteurianus. Furthermore, field-emission scanning electron microscopy analysis showed that the bacterial cells had a rough surface, were rod-shaped, and were ${\sim}1{\times}2{\mu}m$ in size. Interestingly, cells of the isolate from one of the vinegars were surrounded with an extremely fine threadlike structure. Thus, our results suggest that formation of the surface film in rice vinegar was attributable not to external contamination, to the production of bacterial cellulose by A. pasteurianus to withstand the high concentrations of acetic acid generated during fermentation. However, because of the formation of a surface film in vinegar is undesirable from an industrial perspective, further studies should focus on devising a modified fermentation process to prevent surface film formation and consequent quality degradation.

• Journal of Food Hygiene and Safety
• /
• v.23 no.4
• /
• pp.291-296
• /
• 2008

The study was undertaken to provide information on the efficacy of sanitizers against bacteria with and without organic road dried on to food contact surfaces using the surface test method which EU and USA are currently implementing as one of their official test methods. Escherochia coli ATCC 10536 or Staphylococcus aureus ATCC 6538 was inoculated on to food contact surfaces, such as stainless steel, polypropylene, and silicon, which was then treated with benzalkonium chloride, sodium hypochlorite, or ethanol as a sanitizer for 5minutes at $20^{\circ}C$. Results indicated that the type of surface had little affected the efficacy of various sanitizers. In addition, 200 ppm of benzalkonium chloride or 200 ppm of sodium hypochlorite showed no definite reduction of bacterial populations in the present of organic load, while 40% ethanol showed reduction to $4\;cfu\;\log_{10}$/carrier or more in viable count in the organic load.

• Korean Journal of Food Science and Technology
• /
• v.25 no.5
• /
• pp.571-575
• /
• 1993

Effect of surface hydrophobicity of soybean peptides on serum cholesterol in rats was investigated. Soybean protein(ISP), casein(CNP), and their peptic hydrolyzates fractionated by acid precipitations (SHT, SH8, SH6, SH4, CHT, CH6, CH5, CH4) were fed to rats and the concentration of serum cholesterol and the fecal steroid excretion were measured. And surface hydrophobicities of the peptide fractions were measured by determining by the ANS flourescence intensity and SDS binding capacity. It was found that the higher the surface hydrophobicity of peptides was, the more the fecal steroids excreted(r=0.801) and the lower the concentration of serum cholesterol became(r=-0.868). However, there was no relationship between SDS surface hydrophobicity and fecal steroids or serum cholesterol. ANS surface hydrophobicity of soybean protein was increased by enzymatic hydrolysis. These results suggest that high surface hydrophobicity of peptides formed during digestion is responsible for the hypocholestrolemic effect of soybean protein through the hydrophobic interaction between the peptides and bile salts in rats.

• Food Science and Biotechnology
• /
• v.15 no.3
• /
• pp.404-408
• /
• 2006

Feasibility of surface plasmon resonance (SPR) method to evaluate soybean frying oil quality was evaluated. Free fatty acid value, p-anisidine value, conjugated dienoic acid content, conjugated trienoic acid content, peroxide value, iodine value, total polar compound (TPC), ratio of unsaturated fatty acid to saturated fatty acid, refractive index, dielectric constant, smoking point, and L, a, and b of Hunter color system were selected as parameters related to conventional evaluation of soybean frying oil quality. SPR scale mapped with conventional quality parameters well described free fatty acid value, conjugated dienoic acid content, dielectric constant, TPC, and b of Hunter color system, as shown by correlation and linear regression analyses.