• Journal of Environmental Health Sciences
• /
• v.42 no.3
• /
• pp.160-168
• /
• 2016

Objectives: Materials coming into contact with food may result in the migration of chemical substances into the food. To protect consumers from exposure, Regulation (EU) No. 10/2011 specifies the use of standard migration tests. Polyethylene terephthalate (PET), widely used for food packaging materials, has drawn the attention of researchers because unwanted migration of PET into food might occur when consumers reuse packaging material. The aim of this study was to predict and develop a migration model for two components, acetaldehyde and butyraldehyde in PET, into food simulants under conditions of changing pH and solvents, such as those observed in fermented foods like kimchi or sauerkraut. Methods: Using a migration model based on Fick's second law of diffusion in one dimension, the migration of acetaldehyde and butyraldehyde from PET into a simulant of fermented food at $20^{\circ}C$ over 10 days was evaluated. The simulant for fermented food was modelled as 10% ethanol for three days, followed by 3% acetic acid for seven days. Results: The migration of acetaldehyde into the 10% ethanol was 0.36 times that of a simulated fermented food system, while that of butyraldehyde was 1.34 times greater. These results may have been influenced by the chemical interactions among the migrants, polymers and simulants, as well as by the solubilities of the migrants in polymers and simulants. Conclusion: Because food simulants have a limited capacity to mimic real food systems under the current migration model, an appropriate simulant and migration test should be considered in the case of increasing acidity. Furthermore, since the accuracy of the worst-case estimation of migration predicted by the current model is severely limited under changing food conditions, food simulants and their interactions should be further investigated with respect to conservative migration modelling.

• Journal of Food Hygiene and Safety
• /
• v.16 no.4
• /
• pp.333-341
• /
• 2001

The actual overall migration data obtained from plastic food packaging materials into food simulants under high temperature testing conditions as described in the regulations of European Union, USA, and Korea or Japan were compared. Overall migration values(OMVs) with non-fatty food simulants under high temperature conditions were observed to be generally below 2.5 mg/dm$^2$ except polyamides(CPA and PA 6,6) which were tested at 121$^{\circ}C$ for 2 hrs. As for the fatty food simulants, the OMVs with soybean oil were higher than other simulants. Among the films tested, PVC wrap showed higher OMVs ranging between 23.9 and 54.6 mg/dm$^2$than others. The OMVs were measured at higher level with the elevation of contact temperature and the extension of contact time, and in fatty food simulants rather than in non-fatty simulants. Under similar testing temperature and time conditions. the OMVs tended to be increased in polar films like PA with polar simulants, and contrarily in non-polar films like PO with non-polar simulants. It is noteworthy that a discrepancy with regard to the result of OMVs was observed for some films as a result of different migration testing methods and conditions of each country areas.

• Journal of Food Hygiene and Safety
• /
• v.12 no.2
• /
• pp.132-140
• /
• 1997

Additives in plastics are capable of migrating from the packaging materials into the foodstuffs, thereby presenting a source of contamination and a potential health risk to the consumer. The migration from packaging materials into foodstuffs is first of all regulated by examining the amounts of global and specific migrated components. Besides, there is worldwide still a need for practical methods for measuring and monitoring migration from polymers, especially for the testing of migration into fatty foodstuffs. Therefore, these studies were undertaken to investigate the safety status of domestic plastic packaging materials with respect to migration. Another objective of this study was to examine the applicability of ethanol as an alternative fatty food simulant substituting for olive oil and n-heptane. The evaporation residues for various dometic plastic samples determined as described in Korean food laws were in the level from 4.3 to 14.5 mg/$\ell$, which were much lower than the limit value of 150 mg/$\ell$. The global migration values into 95 % ethanol showed to be comparable to those into n-heptane, while the olive oil migration values were comparably higher than those into ethanol or n-heptane and moreover they were not reproducible. The kinetic migration begavior of additives in polyolefin samples into 95% ethanol showed a Fickian diffusion process. The results of these studies on global migration and kinetic testings demonstrate that the ethanol could be successfully substitute for the olive oil and n-heptane as an alternative fatty food simulant, at least in contact with polyoefins.

• Journal of Food Hygiene and Safety
• /
• v.33 no.4
• /
• pp.229-239
• /
• 2018

Currently, in Korea, a dry food simulant has not been designated for the migration testing of paper and board, food contact materials (FCMs) being used in dry foods, and foods heated at ultra-high temperature. Considering the diverse usage of FCMs, in order to secure reliable and confident safety evaluation and to overcome the non-trade barrier tariff in worldwide trade, migration testing methods of what should be more clearly defined for securing and overcoming. This article delves into the available literature on the use of $Tenax^{(R)}$ as a simulant for dry foods as well as its suitability and limitations, and examines the feasibility of its introduction into Korean FCMs regulation. Most experimental studies using $Tenax^{(R)}$ showed overestimated migration values when used in real foods, which reflects the potential of $Tenax^{(R)}$ as a dry food simulant in a worst-case scenario. However, more studies are required to optimize migration testing using $Tenax^{(R)}$ by standardizing the solvent type and the extraction method for surrogates of various FCMs and foods, and to resolve the potential drawbacks in the use of $Tenax^{(R)}$.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.28 no.1
• /
• pp.15-21
• /
• 2022

The purpose of our study was to investigate the migration level of lead (Pb), cadmium (Cd), and barium (Ba) from glassware into a food simulant and to evaluate the exposure of each element. The test articles were glassware, including tableware, pots, and other containers. Pb, Cd, and Ba were analysed by Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES). The analytical performance of the method was validated in terms of its linearity, limit of detection (LOD), limit of quantification (LOQ), recovery, precision, and uncertainty. The monitoring was performed for 110 samples such as glass cups, containers, pots, and bottles. a food simulant. Migration test was conducted at 25? for 24 hours in a dark place using 4% acetic acid as a food simulant. Based on the data; exposure assessment was carried out to compare the estimated daily intake (EDI) to the human safety criteria. The risk levels of Pb and Ba determined in this study were approximately 1.9% and 0.3% of the provisional tolerable weekly intake (PTWI) and tolerable daily intake (TDI) value, respectively, thereby indicating a low exposure to the population.

• Korean Journal of Food Science and Technology
• /
• v.31 no.4
• /
• pp.931-937
• /
• 1999

Styrene dimers and trimers from polystyrene cup noodle containers were analyzed by GC and GC/MS extracted with various simulants. For the quantitation of styrene dimers and trimers, 1,3-diphenylpropane (DP) and benzyln-butyl phthalate (BBP) were chosen as the standards. The results showed that the average of the styrene dimers in the containers was 603 ppm, and that of trimers was 5731 ppm. Four styrene dimers, including 1,2-diphenyl-cyclobutane, were identified as well as seven trimers such as 2,4,6-triphenyl-l-hexene. The migration of the styrene dimers and trimers, from the cup noodle containers of polystyrene into foods, was conducted using simulants including boiling water as well as soybean oil and n-heptane. In addition to, the analysis of each migrated styrene was also performed filled with boiling water into noodle and soup after certain time (5, 10, 20, 30 min). The results showed that the migration of styrene dimers and trimers from cup noodle containers was not detected in the case of using boiled water or soybean oil as a simulant, while styrene dimers and trimers were detected 1.18 ppm and 14.21 ppm, respectively, when heptane was adopted as a simulant. In the case of filling with boiled water into noodle and soup, both styrenes were not detected at 5 min and 10 min, however, some samples standing for 20 min released styrene dimers and trimers as much as 0.009 ppm, and 0.019 ppm for 30 min.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.6
• /
• pp.1056-1062
• /
• 2004

Migration of low molecular weight components from expanded polystyrene (ESP) to distilled water was measured at different temperature conditions. Overall migration and specific monomer migration were measured. Diffusion model based on Fick's law was used to determine the apparent diffusion coefficients at various experimental conditions. The overall and specific migration levels were estimated to give some practical implications for regulatory guideline development and safe package design. Diffusion coefficients for overall migration in KMnO$_4$ oxidizable extractives and specific migration of styrene monomer from ESP at 6$0^{\circ}C$ were 0.030 and 6.8${\times}$10$^{-5}$ $\textrm{mm}^2$/h, respectively. Their temperature dependence could be explained by Arrhenius equation with respective activation energies of 80.5 and 98.6 kJ/㏖. Experimental conditions ensuring desired migration level were suggested for reliable examination of migration from the packaging material. Some explanatory estimations of migrations were given for some typical conditions of potential usages.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.5 no.2
• /
• pp.24-30
• /
• 1999

The migration mechanism of trace elements, Pb, Cd, Cu, Zn and Sn from brass food-contact utensiles was investigated. The migration of metals from brass was affected by the migration temperature (30, 60, 80 and $95^{\circ}C$), the simulant pH (2.5, 4.3, 6.0 and 7.0) and the migration time (30, 90, 180 and 360 min.). The amount of Pb migration was maximum at $95^{\circ}C$ with pH 2.5. This study indicated that the equilibrium of Pb migration was reached at 180 minutes. The mechanism of Pb migration was investigated with Scanning Electron Microscope (SEM) and Electron Probe Micro Analyzer (EPMA). To correlate the relations between the migration and the content of Pb in brass samples, ten brass samples having known content of Pb (the quantities of Pb in brass ; 0, 0.02, 0.09, 0.1, 0.2, 0.5, 0.9, 1.4, 5.4 and 9.2% (w/w)) were tested in the following conditions, 4% acetic acid, $95^{\circ}C$ and 30 minutes. The result represented that content of Pb in brass samples must be below 0.2% (w/w) to satisfy the 1.0 ppm (as Pb) of Korea Food Code.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.2
• /
• pp.447-450
• /
• 2004

Overall migration through epoxy layer coated wood was investigated to estimate the coating thickness satisfying the regulatory limit. As an index of overall migration, KMnO$_4$ oxidizable extractives by the food simulant water solution was used. Migration pattern in interest range could described by a simple diffusion model and the temperature dependence of the permeability index could be explained by Arrhenius equation. The thickness of epoxy coating greater than 0.004 mm was analyzed to be required for satisfying the regulatory guideline.

• Journal of Food Hygiene and Safety
• /
• v.26 no.4
• /
• pp.383-387
• /
• 2011

The levels of migration of 1-hexene and 1-octene residues in PE (polyethylene) products were analyzed by Headspace gaschromatography (HSGC). A total of 21 samples were including lap, polyglove, zipper bag and ect. The samples were eluted with distilled water, 4% acetic acid, 20% ethanol and n-heptan. The limit of detection (LOD) was 0.06 mg/L ~ 0.30 mg/L and limit of quantitation (LOQ) was 0.21 mg/L ~ 1.01 mg/L, respectively. But because of the high volatile, n-heptan elution was not detected 1-hexene and 1-octene standard. 1-hexene and 1-octene were not detected in the sample which eluted with simulant at $60^{\circ}C$, 30min. Microwave for 1 minute also treated sample and direct heated at $100^{\circ}C$ without simulant were not detected.