• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.1 no.1
• /
• pp.20-28
• /
• 1995

The conditions of Soxhlet extraction and HPLC analysis were examined for the determination of antioxidants used for polyolefins manufacturing. The extraction with methylene chloride in a Soxhlet apparatus for 10 hours and above provides almost complete recovery of the additives from polyolefins. The determination of the antioxidants including BHT, Irganox 1076, Irganox 1010 and Irgafos 168 could be successfully performed by using reversed-phase HPLC under gradient elution where the baseline separation of all four antioxidants in a single run was possible. In addition, the antioxidants inherently contained in commercial LLDPE and OPP films were identified and quantitatively determined.

• Food Science and Preservation
• /
• v.4 no.1
• /
• pp.11-15
• /
• 1997

This experiment carried out to find the storage life according to the kinds of packaging material. Sheridan(Grape) which was fumigated SO2 were wrapped with polyethylenes(Bio-PE and PE) and stored at $0^{\circ}C$ under 90% RH modified condition. The resorts were summarized as follow. Natural weight loss was increased according to the storage time during the 135days storage that was only 1.0-1.7% in sealing section while 10% in non-sealing section. Abonrmal fruits were increased as the storage time was increased and it was 6.6-6.7% in sealing section while 100% in non-sealing during the 135days storage. Quality of appearance and taste are better in sealing section than non-sealing section and it was good in Bio-PE sealing section between packaging materials. Moistrue content was de creased as the storage range was increased and the decreasing rate of that during the storage was 4.9-5.2% in sealing section between treatments. During the storage range increased, the soluble solid degree was increased in non-sealing section but decreased in sealing section.

• Food Science and Preservation
• /
• v.23 no.3
• /
• pp.422-431
• /
• 2016

To investigate the causes of the thermal deformations of packaging materials when microwave-heating ready-to-eat sauce products packaged in stand-up pouches, patterns of temperature changes were determined using an infra-red thermal imaging camera, a thermo-sensitive tape, and a fiver-optic thermometer. The temperature distributions of spicy chicken sauce and Indian curry samples in a stand-up pouch were found to be uneven during micrewave heating. A sharp increase in the temperature was detected, especially above the filling layers and in the corners of sealing layers of the package. The temperature measurements using an infra-red thermal imaging camera are restricted to the surface, and therefore might underestimate the actual temperature. Using a thermo-sensitive tape, temperature up to $200^{\circ}C$ were measured in the spicy chicken sauce sample showing package deformation. When the temperature is measured using a fiber-optic thermometer, it is crucial to have precise sensor performance to accurately measure the temperature in a narrow hot-spot area of the package. In this experiment, the fiber-optic thermometer was attached to a GaAs crystal sensor, which obtained more sensitive and accurate temperature measurements than those by a convectional sensor.

• Journal of the Korean Society of Food Culture
• /
• v.22 no.1
• /
• pp.83-90
• /
• 2007

The changes of the color, texture and volatile flavor compounds of Yu-gwa were investigated that affected by the oxidation during storage to characteristic Yu-gwa quality. Among the proximate compositions, carbohydrate was the most abundant component, and followed by lipid and moisture. Although the change of the color showed different pattern by the packaging materials during the storage period, the value of yellowness(b) increased but that of lightness(L) decreased dramatically after 3 month storage. In the textural properties reported closely related with the moisture content, hardness was fairly affected on the period of the storage rather than the type of packaging materials. The flavor compounds of Yu-gwa were analyzed to evaluate the change of distinct volatile compounds during storage. Of the twenty one separated volatile compounds, major volatiles were aldehydes, alcohols and alkenes. The results also showed that polyethylene(PE) contained less volatiles than polypropylene(PP) by the oxidation process during storage.2,4-Decadienal was gradually increased with the period of the storage, whereas octane and furan were decreased. The results provided that the change of the flavor distribution during the storage, and also the possibility of the volatiles such as hexanal, nonanal and 2,4-decadienal as the indicator for the oxidation process.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.14 no.3
• /
• pp.229-234
• /
• 1985

The effect of packaging on the quality of dried anchovy was investigated, when packed with various materials and stored at different conditions. In cases of nitrogen gas substitution or addition of antioxidant, the reaction rates of lipid oxidation, the loss of available lysine and browning of the samples sealed in aluminum laminated film bag were lower than those packed in kraft paper or polyethylene film bag while the samples without gas substitution did not reveal any great differences in the rate of the reactions. The shelf-lives of the samples computed as a function of lipid oxidation were 90, 98 and 137 days at the storage of $35^{\circ}C$ for the packages of kraft paper, polyethylene and aluminum film respectively. And those at $55^{\circ}C$ storage for the same samples were 47, 51 and 77 days. The half-lives of available lysine loss were 227, 209 and 312 days at $35^{\circ}C$: 83, 83 and 147 days at $55^{\circ}C$ for the samples respectively. And the shelf-lives determined as a function of browning reaction were 26, 27 and 49 days at $55^{\circ}C$. The predicted shelf-lives at $25^{\circ}C$ as a function of lipid oxidation were 130, 140, and 189 days for kraft paper, polyethylene and aluminum laminated film packaging: 207, 229 and 246 days for the browning reaction, and 363, 339 and 415 days for the loss of available lysine. The results suggest that the protective effect of packaging on the reactions of lipid oxidation and browning could not be aided unless the air was expelled or replaced to inert gas.

• Korean Journal of Community Nutrition
• /
• v.6 no.5
• /
• pp.837-847
• /
• 2001

The main purposes of this study were to survey and assess the current situation surrounding solid waste generation in school foodservices, to identify and evaluate the measures(reduction and recycling programs) taken by the foodservices for waste disposal, and to suggest appropriate reform measures to improve the current status, especially in terms of environmental preservation. Questionnaires on solid waste management practices were mailed to 206 school foodservice dietitians in the Kyungbuk region : a 64.0%(N = 130) response rate was obtained. While there are food waste and packaging waste generated from the foodservice operations, about a third(34.1%) of the foodservice operations were responsible for the disposal of both the food wastes and packaging wastes. About 90% of school foodservice managers were responsible for managing solid wastes. The primary recycling methods of leftovers generated from the school food service operations were livestock feed(76.0%). About 60.0% of school foodservice managers conducted the food waste reduction program. The performance by the foodservice managers in reducing the food waste was not satisfactory in several fields, such as developing environmentally friendly menus or abiding by the standard recipe, etc. In addition, the government assistance system was not properly working in the food service management. In conclusion, we should focus on increasing the performance in reducing the food waste by the foodservice managers, strengthening and facilitating the government assistance system for the food waste management and to develop education methods and education materials for food waste management.

• Journal of Dairy Science and Biotechnology
• /
• v.41 no.4
• /
• pp.219-229
• /
• 2023

Consumer demand for products with health benefits and natural ingredients is significant for the expansion of functional foods. Edible films and coatings are an excellent way to diversify the market for functional foods and as substitutes for the prevailing packaging and products. Incorporation of whey protein (WP) and its active ingredients into edible films and coatings is a promising technique that can be applied to various food products. Numerous combinations can be used on an industrial scale depending on the purpose, product, nature of the film, type of active ingredient, and type of inclusions. In this review, we describe several characteristics of edible WP films and coatings used as novel packaging materials. WP-based packaging can play a beneficial role in sustainability because of the option of recycling materials rather than incinerating, as in synthetic laminates, because of the use of natural byproducts from the food industry as raw materials. However, cost-effectiveness is a driving force against industrial setbacks in current and future WP processing developments. The industrial application of this new technology depends on further scientific research aimed at identifying the mechanism of film formation to improve the performance of both the process and product. Furthermore, research such as consumer studies and long-term toxicity assessments are required to obtain significant market shares.

• Food Science and Preservation
• /
• v.15 no.6
• /
• pp.804-809
• /
• 2008

Modified atmosphere packaging (MAP) was assessed in terms of extending the shelf life of Solidago virgaurea spp. gigantea. In June 2005 Solidago virgaurea spp. gigantea were harvested from Ulleung Island, packaged in $30\;{\mu}m$ PP, $30\;{\mu}m$ Antifogging-OPP, $30\;{\mu}m$ LDPE, $18\;{\mu}m$ Macroperforated-HDPE, $60\;{\mu}m$ nylon/PE, or $85\;{\mu}m$ PVC/PE film, then stored at 4, 10 or $20^{\circ}C$ for up to 14 days. The $O_2$ concentration decreased to $9{\sim}10%$ in the PP and A-OPP packaging, to $12{\sim}16%$ in LDPE packaging, and to 2% in nylon/PE and PVC/PE packaging at $10^{\circ}C$. The $CO_2$ concentration increased to 5% at $10^{\circ}C$ in PP, A-OPP and LDPE packaging, but increased consistently in the nylon/PE and PVC/PE packaging. Weight loss was markedly reduced by all MAP films except M-HDPE, and which was enhanced with decreasing storage temperature. The soluble solids and pH were not affected by the packaging material at $4^{\circ}C$ and $10^{\circ}C$, but were affected at $20^{\circ}C$. The highest score for sensory qualities (appearance, color and overall acceptability) was obtained for vegetables stored at $4^{\circ}C$ in PP films. Our results show that MAP using PP films and $4^{\circ}C$ storage can effectively maintain the quality of Solidago virgaurea spp. gigantea.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.30 no.1
• /
• pp.1-14
• /
• 2024

As awareness of environmental issues continues to grow, there is an escalating demand for recycling and repurposing byproducts of agricultural and food production processes and their conversion to high-value products. Coffee is the most widely consumed beverage globally; during coffee beverage processing and consumption, byproducts such as coffee silverskin (CS), spent coffee grounds (SCGs), and oil are generated. Despite containing beneficial materials such as cellulose, hemicellulose, lignin, lipids, and bioactive substances, these byproducts are typically discarded in landfills or incinerated. The utilization of CS, SCGs, and oil in the development of packaging materials holds significant potentials toward the realization of a sustainable society. To this end, considerable research efforts have been dedicated to the development of high-value materials derived from coffee byproducts, including functional fillers, polymer composites, and biodegradable polymers. Notably, CS and SCGs have been employed as functional fillers in polymer composites. Additionally, lipids extracted from SCGs have been used as plasticizers for polymers and cultured with microorganisms to produce biodegradable polymers. This review focuses on the research and development of polymer/CS and polymer/SCG composites as well as cellulose extraction and utilization from CS and SCGs and its applications, oil extraction from SCGs, and cultivation with microorganisms using extracted oil for polyhydroxyalkanoates(PHA) production.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.12 no.1
• /
• pp.27-34
• /
• 2006

Nanotechnology is playing an increasingly important role in the development on most areas of science and technology. Because of its potential of providing novel performance at the nanoscale, the nanotechnology can influence a wide range of applications such as information, energy, environment and biology, all essential for socioeconomic development in the near future. In the packaging industry, the main applications of nanotechnology are (1) to enhance durability, (2) improve gas and oxygen barriers of raw materials for films and packaging, (3) create new functional sensors, and (4) lengthen shelf life for the packaged food quality and will also help in pharmaceuticals and cosmetics. Nanotechnology is growing in an international interactions which accelerate in science, education, and industrial R&D. Government, industries and the business sector in Korea have shown a strong ambition towards the development of nanotechnology for the future. Meanwhile, a strategic investment in packaging area is much smaller compared to supporting research and development (R&D) of various major research areas. This article were reviewed the status and trends of current packaging research and development activities using nanotechnology in Korea, USA, Japan, and other international nations.