• 한국식품위생안전성학회지
• /
• 제6권2호
• /
• pp.17-22
• /
• 1991

Great attention form a public health aspect has centered on the safety of tissues residues of veterinary drugs and environmental contaminants, with intensification of animal husbandry, the use of veterinary drugs will become increasingly important. Heavy responsibility is placed on the veterinarian and livestock producer to observe the period for withdrawal of drug prior to slaughter to assure that illegal concentrations of drug residues in meat, milk and egg do not occur. Every nation has their own regulations in relation to the residues and the guidelines on the use of veterinary drugs to fulfil the regulations, and their own national residue programs to monitoring and eliminate illegal products. Good practice of veterinary drug by users and governmental surveillance programs are very important to ensure animal food safety.

• 한국독성학회:학술대회논문집
• /
• 한국독성학회 2002년도 Current Trends in Toxicological Sciences
• /
• pp.130-130
• /
• 2002

Polychlorinated biphenyls (PCBs) are persistent environmental contaminants that elicit a broad spectrum of toxic effects in mammals and other vertebrate species. Because of their lipophilicity, chemical stability and resistance to biodegradation, PCBs tend to accumulate in the human body via food chain and environmental matrices including human adipose tissues, blood and milk.(omitted)

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권3호
• /
• pp.402-413
• /
• 2001

Food safety is a term broadly applied to food quality that may adversely affect human health. These include zoonotic diseases and acute and chronic effects of ingesting natural and human-made xenobiotics. There are two major areas of concern over the presence of residues of antibiotics in animal-derived foodstuffs with regard to human health. The first is allergic reactions. Some antibiotics, such as penicillins can evoke allergic reactions even though small amounts of them are ingested or exposed by parenteral routes. The second is development of antibiotic resistance in gut bacteria of human. Recently multi-resistant pneumococcal, glycopeptide-resistant enterococci and gram negative bacteria with extended-spectrum $\beta$-lactamases have spread all over the world, and are now a serious therapeutic problem in human. Although it is evident that drugs are required in the efficient production of meat, milk and eggs, their indiscriminate use should never be substituted for hygienic management of farm. Drug should be used only when they are required. In addition to veterinary drugs, environmental contaminants that were contaminated in feed, water and air can make residues in animal products. Mycotoxins, heavy metals, pesticides, herbicides and other chemicals derived from industries can be harmful both to animal and human health. Most of organic contaminants, such as dioxin, PCBs and DDT, and metals are persistent in environment and biological organisms and can be accumulated in fat and hard tissues. Some of them are suspected to have endocrine disrupting, carcinogenic, teratogenic, immunodepressive and nervous effects. The governmental agencies concerned make efforts to prevent residue problems; approval of drugs including withdrawal times of each preparation of drugs, establishment of tolerances, guidelines regarding drug use and sanitation enforcement of livestock products. National residue program is conducted to audit the status of the chemical residues in foods. Recently HACCP has been introduced to promote food safety from farm to table by reducing hazardous biological, chemical and physical factors. Animal Production Food Safety Program, Quality Assurance Programs, Food Animal Residue Avoidance Databank are para- or non-governmental activities ensuring food safety. This topic will cover classification and usage or sources of chemical residues, their adverse effects, and chemical residue status of some countries. Issues are expanded to residue detection methodologies, toxicological and pharmacokinetic backgrounds of MRL and withdrawal time establishments, and the importance of non-governmental activities with regard to reducing chemical residues in food.

• 한국식품영양과학회지
• /
• 제22권3호
• /
• pp.359-366
• /
• 1993

Molds are eucaryotic, multicellular, multinucleate, filamentous organisms that reproduce by forming asexual and sexual spores. The spores are readily spread through the air and because they are very light-weight and tend to behave like dust particles, they are easily disseminated on air currents. Molds therefore are ubiquitous organisms that are found everywhere, throughout the environment. The natural habitat of most molds is the soil where they grow on and break down decaying vegetable matter. Thus, where there is decaying organic matter in an area, there are often high numbers of mold spores in the atmosphere of the environment. Molds are common contaminants of plant materials, including grains and seeds, and therefore readily contaminate human foods and animal feeds. Molds can tolerate relatively harsh environments and adapt to more severe stresses than most microorganisms. They require less available moisture for growth than bacteria and yeasts and can grow on substrates containing concentrations of sugar or salt that bacteria can not tolerate. Most molds are highly aerobic, requiring oxygen for growth. Molds grow over a wide temperature range, but few can grow at extremely high temperatures. Molds have simple nutritional requirements, requiring primarily a source of carbon and simple organic nitrogen. Because of this, molds can grow on many foods and feed materials and cause spoilage and deterioration. Some molds ran produce toxic substances known as mycotoxins, which are toxic to humans and animals. Mold growth in foods can be controlled by manipulating factors such as atmosphere, moisture content, water activity, relative humidity and temperature. The presence of other microorganisms tends to restrict mold growth, especially if conditions are favorable for growth of bacteria or yeasts. Certain chemicals in the substrate may also inhibit mold growth. These may be naturally occurring or added for the purpose of preservation. Only a relatively few of the approximately 100,000 different species of fungi are involved in the deterioration of food and agricultural commodities and production of mycotoxins. Deteriorative and toxic mold species are found primarily in the genera Aspergillus, Penicillium, Fusarium, Alternaria, Trichothecium, Trichoderma, Rhizopus, Mucor and Cladosporium. While many molds can be observed as surface growth on foods, they also often occur as internal contaminants of nuts, seeds and grains. Mold deterioration of foods and agricultural commodities is a serious problem world-wide. However, molds also pose hazards to human and animal health in the form of mycotoxins, as infectious agents and as respiratory irritants and allergens. Thus, molds are involved in a number of human and animal diseases with serious implication for health.

• Food Science and Biotechnology
• /
• 제14권3호
• /
• pp.380-386
• /
• 2005

Optimal conditions of ultrafiltration (UF) and nanofiltration (NF) were investigated for separation and concentration of isoflavones and oligosaccharides from Sunmul. Levels of COD, BOD, and suspended solids (SS) in UF and NF permeates were also determined to evaluate effectiveness of these processes for reducing water pollution. Optimal UF operation conditions to achieve minimal fouling and maximal flux were $33-34^{\circ}C$ operating temperature and 2.3-2.4 bar trans-membrane pressure. Recovery yields of isoflavones and oligosaccharides in UF retentate were 11.49-28.16% and 12.77-27.57%, respectively. Increase in volumetric concentration factor (VCF) resulted in more functional compounds of isoflavones and oligosaccharides passing through UF membrane. Total isoflavone and oligosaccharide yields decreased by 3% as VCF increased from 6.0 to 8.0 and from 8.0 to 10.0, while decreased significantly by 10% as VCF decreased from 4.0 to 6.0. Optimal NF operating conditions were 192-195 psig operating pressure at $30-33^{\circ}C$. Total yields of isoflavones and oligosaccharides significantly decreased at VCF 8.0, whereas did not decrease up to VCF 6.0 during NF operation. Therefore, VCF 6.0 was recommended for economical process. COD and BOD decreased by more than 98% after NF process, and SS were not detected after UF process. These results indicated sequential filtration process was useful for separation of isoflavones and oligosaccharides from Sunmul and for reducing water contaminants.

• 식품과학과 산업
• /
• 제49권3호
• /
• pp.55-61
• /
• 2016

Even though the food safety system in the United States is one of the best in the world, many millions of people become sick and thousands die from foodborne illnesses caused by any of a number of microbial pathogens and other contaminants. Large recalls of United States Department of Agriculture (USDA) and the Food Drug and Administration (US FDA)-regulated food products due to findings of E. coli O157:H7, Listeria, Salmonella, and other problems occur each year. As the US FDA Food Safety Modernization Act (FSMA) passed in 2011, FSMA will require food processing, manufacturing, shipping, and other regulated entities to conduct an analysis of the most likely safety hazards and to design and implement risk-based controls to reduce or eliminate these hazards. FSMA also mandates increased scrutiny of food imports, which account for a growing share of U.S. food consumption; food import shipments will have to be accompanied by documentation showing that they can meet safety standards that are at least equivalent to those in the U.S. On September 17, 2015, the US FDA published final rules for Preventive Controls for Human and Animal Food and, continuing into 2016, the US FDA intends to finalize the remaining five rules it has proposed to implement FSMA. Among these rules, this article will review and discuss Preventive Controls for Human Food Rule and its components, and suggest how to comply with these FSMA rules as foreign human food and ingredients suppliers to the US.

• 한국식품위생안전성학회지
• /
• 제14권4호
• /
• pp.365-371
• /
• 1999

인삼시료에 있는 quintozene, tolclofos-methyl 그리고 procymidone 등의 농약성분을 추출하기 위한 방법으로서 microwave를 이용할 수 있을 지의 여부와 인삼을 가공제품으로 만들기 전에 microwave를 이용하여 잔류농약 성분을 신속히 추출하여 제거시킬 수 있는지 알고자 하였다. 인삼분말 시료에 hexane을 추출용매로 이용한 microwave 추출의 최적 조건은 power 150 watts, 추출시간 2분이었고 그 추출 효율은 Soxhlet으로 7시간 동안 가열 환류 추출한 결과를 지수 100으로 하였을 때 quintozene 100, tolclofos-methyl 92, procymidone 100으로 거의 동일한 수준으로 나타났다. 그리고 microwave 추출법을 사용함으로써 실제 Soxhlet 추출법에서 사용된 용매양의 최소 7배 이상 감소시킬 수 있었고 추출 시간 또한 7시간에서 2분으로 훨씬 단축되었다. 인삼 엑기스 제조 전 잔류농약 성분의 제거 실험에 있어서 45%나 60% ethyl alcohol을 용매로 사용하고 microwave로 power 150 watts 추출시간 2분 이내로 1회 추출하여 quintozene 100%, tolclofos-methyl 69%, procymidone 83%정도의 제거효과를 얻었다.

• Carbon letters
• /
• 제10권2호
• /
• pp.114-122
• /
• 2009

Crushed, depitted peach stones were impregnated activated with 50% $H_3PO_4$ followed by pyrolysis at $500^{\circ}C$. Two activated carbons were produced, one under its own evolved gases during pyrolysis, and the second conducted with air flow throughout the carbonization stage. Physicochemical properties were investigated by several procedures; carbon yield, ash content, elemental chemical analysis, TG/DTG and FTIR spectra. Porosity characteristics were determined by the conventional $N_2$ adsorption at 77 K, and data analyzed to get the major texture parameters of surface area and pore volume. Highly developed activated carbons were obtained, essentially microporous, with slight effect of air on the porous structure. Oxygen was observed to be markedly incorporated in the carbon matrix during the air treatment process. Cation exchange capacity towards Cu (II) and Cd (II) was tested in batch single ion experimental mode, which proved to be slow and a function of carbon dose, time and initial ion concentration. Copper was up taken more favorably than cadmium, under same conditions, and adsorption of both cations was remarkably enhanced as a consequence of the air treatment procedure. Sequestration of the metal ions was explained on basis of the combined effect of the oxygen functional groups and the phosphorous-containing compounds; both contributing to the total surface acidity character.

• 한국수산과학회지
• /
• 제44권6호
• /
• pp.622-629
• /
• 2011

We investigated the effect of the discharged water from Bong Stream, which is located in the drainage area of Gangjinman area on the bacteriological water quality in the coastal area after rainfall events. Following 12.5 mm of rainfall, water discharged from Bong Stream had a very limited effect on bacteriological water quality in adjacent area and the affected area did not extend to the designated area. On the other hand, after 23 mm rainfall, the density of fecal coliform at stations located in the designated area was higher than at stations located in the adjacent area. The degree of bacteriological contamination at the surveyed stations in the coastal area after rainfall events did not show a relationship with distance from the shoreline. These results indicate that the direction of spread and the range of contaminants from the drainage area were affected by tides at the time of the survey. Therefore, a detailed survey of the effects of tides on the diffusion characteristics of the contaminants from Bong Stream is needed to establish a proper management plan for the surveyed area.

• 분석과학
• /
• 제35권1호
• /
• pp.15-23
• /
• 2022

Food delivery is gaining popularity due to changes in lifestyle and dietary patterns. However, packages used to delivery food may contain contaminants including heavy metals, or additives added during manufacturing process which may migrate into food during processing and transportation. In this study, a total of 58 food packages for delivery were collected and tested for migration of heavy metals (lead, cadmium and arsenic), bisphenol A and phenol into food simulants. The method was validated by evaluating linearity of calibration curve, limit of detection, limit of quantification, recovery and precision. Result of heavy metal migration showed that lead was the most frequently migrated metal and the highest concentration was detected in a polypropylene sample. Although there are no specific migration limits for bisphenol A and phenol in packaging materials tested in this study, migrations of bisphenol A and phenol were detected in some packages. This may due to contamination or additives added during manufacture of packages. Risk (%) was calculated to analyze the risk associated with the migration of heavy metals, bisphenol A and phenol, and was always below 1 %. These results showed that food packages for delivery are safe in terms of heavy metals, bisphenol A and phenol migration.