• Food Science and Biotechnology
• /
• 제16권2호
• /
• pp.234-237
• /
• 2007

Water resistance of three biopolyester films, such as poly-L-lactate (PLA), poly-hydroxybutyrate-co-valerate (PHBV), and Ecoflex, and low density polyethylene (LDPE) film was investigated by measuring contact angle of various probe liquids on the films. The properties measured were initial contact angle of water, dynamic change of the water contact angle with time, and the critical surface energy of the films. Water contact angle of the biopolyester films ($57.62-68.76^{\circ}$) was lower than that of LDPE film ($85.19^{\circ}$) indicating biopolyester films are less hydrophobic. The result of dynamic change of water contact angle also showed that the biopolyester films are less water resistant than LDPE film, but much more water resistant than cellulose-based packaging materials. Apparent critical surface energy for the biopolyester films (35.15-38.55 mN/m) was higher than that of LDPE film (28.59 mN/m) indicating LDPE film is more hydrophobic.

• 한국조리학회지
• /
• 제20권5호
• /
• pp.71-75
• /
• 2014

The purpose of this study is to verify antecedent variables that affect emotional labor. The results are as follows. First, display rules positively affected deep acting and negatively affected surface acting. Second, customer contact time positively affected deep acting but did not affect surface acting. Third, the interaction between display rules and customer contact time did not have significant effects on surface acting but negatively affected deep acting. The implications based on these results are as follows. First, theoretically, this study extends the range of leading variables that affect emotional labor and verifies the moderation effects between these variables. Next, practically, this study suggests that presenting harmonious criteria with regards to display rules and customer contact time that fit well into the concept of food service company is a very useful tool to manage emotional labor of the employees. The limitation of this study is that the causal relationship between variables demonstrated in this study cannot be generalized due to convenience sampling and cross sectional research.

• 한국식품위생안전성학회지
• /
• 제23권4호
• /
• pp.291-296
• /
• 2008

현재 미국 및 유럽에서 공정시험법 중 하나로 인정되고 있는 표면시험법을 사용하여 유기물과 함께 또는 유기물 없이 세균만 건조된 식품접촉 표면에서의 살균소독제 유효성에 대한 정보를 제공하고자 식품접촉표면으로 사용되는 스테인리스, 폴리프로필렌 및 실리콘에 Escherochia coli ATCC 10536 또는 Staphylococcus aureus ATCC 6538을 접종하고 살균소독제로서 염화벤잘코늄, 차아염소산나트륨 또는 에탄올을 $20^{\circ}C$에서 5분간 처리하였다. 그 결과, 각 표면의 종류는 살균소독제의 유효성에 큰 영향을 미치지 않았으며, 200 ppm 농도의 염화벤잘코늄 및 차아염소산나트륨은 유기물질이 존재할 경우 생균수를 $4\;cfu\;\log_{10}$/carrier 이상 감소시키지 못하였으나, 40% 에탄올은 생균수를 $4\;cfu\;\log_{10}$/carrier 이상 감소시키는 것으로 나타났다.

• 한국식품과학회지
• /
• 제40권3호
• /
• pp.349-353
• /
• 2008

표준균주 S. Typhimurium과 분리균주 Salmonella spp.에 오염된 돈육을 $10^{\circ}C$에서 다른 돈육(삼겹살, 안심), 컨베이어벨트와 스테인리스 스틸, 도마에 일정시간(2, 4, 24시간)동안 접촉시킨 후 부착율을 조사하였다. Salmonella 표준균주와 분리균주에 오염된 돈육으로부터 삼겹살에 6시간 접촉 시 부착율은 4.21%, 26.87%를 나타내었고, 안심부위에 16.40%, 27.48%를 각각 나타내었지만, 24시간 후에는 두균 모두 삼결살과 안심부위에 100%의 부착율을 보였다. S. Typhimurium에 오염된 돈육으로부터 컨베이어벨트로의 부착율은 접촉시간 2시간 후에는 1.34%을 증가율을 나타냈으나, 6시간 후에는 0.60%로 감소하였고 분리균주 Salmonella spp. 는 접촉 6시간에 부착율이 5.14%의 부착율을 보였다. 스테인리스 스틸의 경우, 표준균주는 6시간 접촉 후에도 부착율이 전혀 없었으며, 분리균주는 접촉 6시간 후에 5.01%의 부착율을 보였다. 그러나 항균도마에는 표준균주와 분리균주 모두 전혀 부착하지 않았다. 본 연구결과, S. Typhimurium과 Salmonella spp.에 오염된 돈육에서 다른 돈육 또는 식품접촉면으로의 부착율은 접촉시간에 따라 영향이 컸으며 분리균주가 표준균주에 비하여 현저하게 높은 부착율을 나타내었다.

• 대한기계학회논문집A
• /
• 제29권2호
• /
• pp.169-175
• /
• 2005

In this paper, the contact stress and strain distributions in elastomer O-ring seals have been analyzed using a non-linear finite element method. The stress behavior of PTFE materials is assumed as Odgen model because the sealing clearance between the flange and the surface of the O-ring is not small and the sealing pressure of working fluids covers from the atmospheric pressure to high pressure of 15MPa. The contact normal force and stress in wavy O-rings in which is developed for this analysis are uniformly distributed along the flange and the wall of the rectangular groove. And the normal sealing forces are also kept high compared to other contact sealing models such as the conventional O-ring and X-ring, Thus, the FEM computed results indicate that the sealing characteristic of wavy O-rings is food compared with other contact seals.

• 한국포장학회지
• /
• 제29권2호
• /
• pp.111-118
• /
• 2023

본 연구에서 연속형 레이저와 나노초 레이저의 경우에는 고분자와 물성 조건이 맞지 않아서, 고분자 필름 표면에 특정 패터닝이 구현되지 않았다. 그러나, 펨토초 레이저를 활용하여 HDPE, PP, PET 등의 식품포장 필름의 표면에 패터닝이 구현됨을 확인하였다. 따라서, 본 연구에서 식품포장 필름에서 펨토초 레이저 패터닝 공정 조건을 확립하였고, 싱글 펄스에 의한 대면적 원형 패턴, 싱글 펄스를 30%를 중첩한 대면적 거칠기 패턴, 직선 패턴, 직선 패터닝을 중첩한 대면적 거칠기 패턴, 직선 패터닝을 교차하여 격자 패턴 등의 표면 패터닝 필름을 제작하였다. 또한, 표면 패턴 구조와 크기에 따른 패터닝 HDPE, PP, PET 필름은 SEM, AFM, 접촉각 분석을 통하여 그 특성을 확인하였다. 펨토초 레이저 패터닝을 하지 않은 각 대조군 필름의 표면 대비 대면적 원형 패터닝 HDPE 및 PP 필름, 싱글 펄스를 30%를 중첩한 대면적 거칠기 패터닝 및 직선 패터닝을 중첩한 대면적 거칠기 패터닝 PET 필름의 표면은 27.1-37.5°의 접촉각을 나타냄으로써, 패터닝 후에 HDPE, PP, PET 필름은 친수성 표면으로 변화되었다. 반면, 나노-마이크로 크기의 돌기 표면구조를 갖고 있는 대면적 격자 패터닝 HDPE 필름의 경우에는 120.4°의 접촉각을 보임으로써, 패터닝 후에 소수성 표면으로 변화되었다. 따라서, 패터닝을 통해 친수성 표면으로 바뀐 필름들은 단백질, 세포, 바이러스 등을 비롯하여 식품의 물질들이 달라붙지 못하거나, 쉽게 떨어지는 엔티파울링 응용분야에 활용이 가능하다. 또한, 향후 좀더 정밀한 나노 및 마이크로 돌기 구조를 갖는 격자 패터닝을 통해 150° 이상의 초소수성 표면을 제작하게 된다면, 자가 청소(Self-cleaning) 등의 초소수성 표면 응용분야에 활용 가능할 것이다.

• 식품보건융합연구
• /
• 제5권3호
• /
• pp.35-40
• /
• 2019

In this study, general bacterial counts and coliform counts, which are hygienic indicator microorganisms, were tested for candy, chocolate, and jelly which are easily available and enjoyed around. After dropping each sample on the desk, indoors, and outdoors, it is immediately collected, or washed and collected to confirm the myth of the 3-second rule. Immediately after removing the wrapping paper, each sample was dropped on the desk, indoors, and outdoors, and after 3 seconds from the moment of contact with the surface, and then collected in a sample bag using sterilized sanitary gloves. After the same operation, each sample was rinsed for 5 seconds using sterilized sanitary gloves and sterilized distilled water, and then collected in a sample bag. The number of bacteria detected in non-washing candies was 41 CFU/g at outdoor and the number of bacteria detected in non-washing chocolate was 76 CFU/g at outdoor. The number of bacteria detected in non-washing jellies was 79 CFU/g at outdoor. Coliform group was not detected in all samples. This showed good results at the level of m = 10,000 or less, which is an allowable value suggested in the Food Code. Also, effect of washing on contaminated food was confirmed. This result is remarkably low compared with the microorganism specimens shown in Food Code, and it is confirmed that contamination occurs but not high value. Therefore, the myth of the 3-second rule is true compared to the figures based on Food Code. However, it showed the characteristics of bacteria that could survive and cross-contaminate on dry food surfaces and emphasized the importance of hygiene through food contact to unsanitary surfaces to minimize the risk of food poisoning.

• 한국포장학회지
• /
• 제23권3호
• /
• pp.125-132
• /
• 2017

The effect of food simulants on properties and light barrier function of LDPE-nano $TiO_2$ composite film has been investigated. LDPE-nano $TiO_2$ composite films were prepared with 5.0wt% $TiO_2$ content by melt-extrusion. To simulate food contact environment, according to KFDA standards and specifications for food utensils, containers and packages, food simulants were selected with deionized water, 50% ethanol, 4% acetic acid and n-heptane and composite films were immersed in each food simulant at $70^{\circ}C$, 30 min except n-heptane ($25^{\circ}C$, 60 min). A variety of material properties, including crystallinity, chemical bonds, surface morphology, mechanical, oxygen barrier and optical properties, of LDPE-nano $TiO_2$ composite film were examined with and without the food simulants treatment. As a result, under regulated migration condition, LDPE-nano $TiO_2$ composite showed extremely stable in all properties tested in the study in contact with food simulants indicating that $TiO_2$ nanoparticles are physicochemically stable and quite compatible with LDPE. Results enable us to anticipate migration of $TiO_2$ will probably not occur. To evaluate influence of migration of $TiO_2$ on food stuffs, their color, pH and acidity were observed as well.

• Corrosion Science and Technology
• /
• 제14권4호
• /
• pp.166-171
• /
• 2015

Knowledge of how metal releases from the stainless steels used in food processing applications and cooking utensils is essential within the framework of human health risk assessment. A new European standard test protocol for testing metal release in food contact materials made from metals and alloys has recently been published by the Council of Europe. The major difference from earlier test protocols is the use of citric acid as the worst-case food simulant. The objectives of this study were to assess the effect of citric acid at acidic, neutral, and alkaline solution pH on the extent of metal release for stainless steel grades AISI 304 and 316, commonly used as food contact materials. Both grades released lower amounts of metals than the specific release limits when they were tested according to test guidelines. The released amounts of metals were assessed by means of graphite furnace atomic absorption spectroscopy, and changes in the outermost surface composition were determined using X-ray photoelectron spectroscopy. The results demonstrate that both the pH and the complexation capacity of the solutions affected the extent of metal release from stainless steel and are discussed from a mechanistic perspective. The outermost surface oxide was significantly enriched in chromium upon exposure to citric acid, indicating rapid passivation by the acid. This study elucidates the effect of several possible mechanisms, including complex ion- and ligand-induced metal release, that govern the process of metal release from stainless steel under passive conditions in solutions that contain citric acid.

• 한국환경보건학회지
• /
• 제27권1호
• /
• pp.75-82
• /
• 2001

Microorganisms can attach firmly to food contact surface material and the resitance of adherent bacteria differ markedly from planktonic cells. Therefore, adherent cells are a potential contamination problem to the food preparation because of their high resistance. to sanitation and heat treatment. This study was carried out in order to investigate growth and decontamination of Listeria monocytogenes attached to stainless steel, glass and plastic. Listeria monocytogenes cells could attach to all types of surface at three temperatures after contact times for 24 hrs. The numbers of adherent cells were greater at higher temperatures, but not increased with incubation time. When recovery of adherent cells was investigated, after 24 grs, the numbers of adherent cells were about 10$^{7}$ , 10$^{10}$ , 11$^{11}$ at 4$^{\circ}C$, $25^{\circ}C$, 3$0^{\circ}C$ repectively. Planctonic cells decreased by 2 log cycles after exposure to the domestic sanitizer. Adherent cells showed high resistance to domestic sanitizers and that was dependent upon surface materials studied, being greatest on plastic followed by stainless steel and glass. Adherent cells were more resistant to heat treatment than planktonic cells. When adherent cells were exposed to the temperature of 5$0^{\circ}C$, 55$^{\circ}C$, 57.5$^{\circ}C$ for 10 min, their populations did not decrease significantly. When the temprature increased to 6$0^{\circ}C$, cells attached to all types of surfaces were completely inactivated for 10 min.