• Journal of the Korean Society for Precision Engineering
• /
• v.8 no.4
• /
• pp.107-117
• /
• 1991

The dynamic stability problem of nonconservative system is one of the important problems. In this study, flexible missile with mass variation is regarded as a free Timoshenko beam subjected to a controlled follower force. The stability was studied numerically through the finite element method. Through the study, the obtained results are as follows: [1] Without force direction control (1) In the case of no mass reduction, the existence of concentrated mass increases critical follower force. (2) Mass reduction rate of the beam slightly effects on the change of critical follower force. [2] With force direction control (1) Shear deformation parameter S contributes insignificantly to the force at instability when $S{\geq}10^4$. (2) With mass variation, increase of concentrated mass increases critical follower force at instbility. (3) The type of promary instability is determined by the sensor location.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.639-642
• /
• 1997

A cylindrical cam with a translation roller follower provides to transfer the translation motion and it s very useful mechanism in the automation. But. it's very difficult that the shape is defined accurately. This paper, proposes a new shape design method of the cylindrical cam with translation roller follower using the relative velocity method[l]. The relativc velocity method lculates the relative velocity of the follower versus the cam at a center of roller, and then determines a contact point by using the geometric relationships and the kinematical constraints. Finally, we present an example in order to prove the accuracy of the proposed methods.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.82-88
• /
• 2002

A simple beam subjected to a uniformly distributed tangential follower force and the successive two moving spring-mass systems upon it constitute this vibration system. The influences of the velocities of the moving spring-mass system, the distance between the successive two moving spring-mass systems and the uniformly distributed tangential follower force have been studied on the dynamic behavior of a simple beam by numerical method. The uniformly distributed tangential follower force is considered within its critical value of a simple beam without the successive two moving spring-mass systems, and three kinds of constant velocities and constant distance of the successive two moving spring-mass systems are also chosen. Their coupling effects on the transverse vibration of the simple beam are inspected too.

• Journal of Power System Engineering
• /
• v.4 no.4
• /
• pp.65-69
• /
• 2000

On the dynamic behavior of a simple beam subjected to an uniformly distributed tangential follower force, the influences of the velocities and magnitudes of a moving mass have been studied by numerical method. The instant amplitude of a simple beam is calculated and analyzed for each position of the moving mass represented by the time functions. The uniformly distributed tangential follower force is considered within its critical value of a simple beam, and four values of velocity is also chosen. Their coupling effects on the deflections of a simple beam are inspected too. When a moving mass moves after middle zone of a simple beam at the low velocities, its deflection is increased by the coupling of an uniformly distributed tangential follower force and moving mass.

• Structural Engineering and Mechanics
• /
• v.33 no.6
• /
• pp.709-724
• /
• 2009

In this paper a free-free uniform beam with damping effects subjected to follower and transversal forces at its end is considered as a model for a space structure. The effect of damping on the stability of the system is first investigated and the effects of the follower and transversal forces on the vibration of the beam are shown next. Proportional damping model is used in this work, hence, the effects of both internal (material) and external (viscous fluid) damping on the system are noted. In order to derive the frequency of the system, the Ritz method has been used. The mode shapes of the system must therefore be extracted. The Newmark method is utilized in the study of the system vibration. The results show that an increase in the follower and transversal forces leads to an increase of the vibrational motion of the beam which is not desirable.

• Tribology and Lubricants
• /
• v.20 no.3
• /
• pp.132-139
• /
• 2004

Many researches about the contacts between cam and follower have investigated EHL film thickness either without dynamic loading effect or only with curve fitting formula such as Dowson-Hamrock's, because including squeeze film effect makes it hard to obtain convergence and stability of computation. Therefore, inaccurate information about minimum film thickness without dynamic loading condition causes inappropriate design of cam profiles and wrong selection of cam and follower materials. In this work, computation tools both for kinematics and dynamics of valve train system of push-rod type and for fluid film thickness with elastic deformation on the basis of dynamic loading condition with multigrid multi-level method is developed. The computational results of minimum film thickness with the respects of both static and dynamic loading conditions are compared for the contact of flat follower over the entire cycle.

• Journal of Industrial Convergence
• /
• v.4 no.2
• /
• pp.39-55
• /
• 2006

Pioneer brand and follower brand show differences in their perception of the environmental uncertainty. Market pioneer brand companies think that the environment is relatively simple and doesn't change much, whereas follower bland companies think that the environment is complicated and changes a lot. For market pioneer brand companies, among dynamism on the environment lever, there was less potential for the environment and parts, and government restrictions compared to follower brand companies. Also the complexity of the environment level complicated compared to the follower brand companies in areas such as competition for consumers with rival companies, materials, resources of equipment and parts, government restrictions, and the amount of change of the market's preference of the product.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.7 s.124
• /
• pp.605-610
• /
• 2007

In this paper a dynamic behavior(natural frequency) of a cracked cantilever beam subjected to follower force is presented. In addition, an analysis of the flutter and buckling instability of a cracked cantilever beam subjected to a follower compressive load is presented. Based on the Euler-Bernoulli beam theory, the equation of motion can be constructed by using the Lagrange's equation. The vibration analysis on such cracked beam is conducted to identify the critical follower force for flutter instability based on the variation of the first two resonant frequencies of the beam. Besides, the effect of the crack's intensity and location on the flutter follower force is studied. The crack section is represented by a local flexibility matrix connecting two undamaged beam segments. The crack is assumed to be in the first mode of fracture and to be always opened during the vibrations.

• Journal of Information Technology Applications and Management
• /
• v.20 no.2
• /
• pp.39-56
• /
• 2013

There have been many studies that open innovation activities have positive effects on firm performance. However, the previous studies have shown conflicting results, depending on the characteristics of companies or the timing of the product launch. This study empirically compares open innovation performance of first-mover companies and follower companies. The analyses are performed on the samples of the Korean Innovation Survey 2010 companies that explored external information and performed R&D cooperation. The results indicate that open innovation activities can have different effects depending on a company's status in the market. For the first-mover companies, the intensity of utilizing external information has greater impact on the firm's performance than the diversity of it. By contrast, for the follower companies, the diversity of utilizing external information has greater impact on the firm's performance than the intensity of it. In terms of R&D cooperation, the external cooperation is found not to have significant effects on a first-mover company's performance. However, external R&D cooperation of a follower company is showing positive impact on the firm's performance. The implication of the study is to analyze the firm's Open-Innovation performance by comparing first-mover companies with follower companies. Therefore, companies need to execute the Open-Innovation strategy by considering firm characteristics or the timing of the product launch.

• Journal of KIISE:Software and Applications
• /
• v.33 no.4
• /
• pp.427-439
• /
• 2006

The SBF (Simple Boundary Follower) is a boundary-following algorithm, and is used mainly for image recognition and presentation. The SBF is very popular because of its simplicity and efficiency in tracing the boundary of an object from an acquired binary image; however, it does have two drawbacks. First, the SBF cannot consistently process inner or inner-outer corners according to the follower's position and direction. Second, the SBF requires movement operations for the non-boundary pixels that are connected to boundary pixels. The MSBF (Modified Simple Boundary Follower) has a diagonal detour step for preventing inner-outer corner inconsistency, but is still inconsistent with inner-corners and still requires extra movement operations on non-boundary pixels. In this paper, we propose the ISBF (Improved Simple Boundary Follower), which solves the inconsistencies and reduces the extra operations. In addition, we have classified the tour maps by paths from a current boundary pixel to the next boundary pixel and have analyzed SBF, MSBF, and ISBF. We have determined that the ISBF has no inconsistency issues and reduces the overall number of operations.