• International Journal of Aeronautical and Space Sciences
• /
• 제12권1호
• /
• pp.63-68
• /
• 2011

Aerodynamic characteristics of a wing during fold motion were investigated in order to understand how variations or changes in such characteristics increase aircraft performance. Numerical simulations were conducted, and the results were obtained using the unsteady vortex lattice method to estimate the lift, drag and the moment coefficient in subsonic flow during fold motion. Parameters such as the fold angle and the fold angular velocity were summarized in detail. Generally, the lift and pitching moment coefficients decreased as the angle increased. In contrast, the coefficients increased as the angular velocity increased.

• 패션비즈니스
• /
• 제24권5호
• /
• pp.106-124
• /
• 2020

The purpose of this study was to analyze the three-dimensional (3D) characteristics and reproducibility of the effective expression of North American smocking pleats in the process of making clothes using a 3D virtual clothing system (CLO) and present a method of expression according to the types of North American smocking. In this study, lattice, lozenge, and flower smocking were produced as real smocking and 3D virtual content, and actual muslin properties were measured using a Fabric Kit and reflected using an emulator. The results of this study confirmed that a dense puckered design such as North American smocking could be expressed depending upon the internal line, fold angle, and reinforcement setting for 3D smocking. To partially apply pleats to flat fabrics, it was necessary to set fold lines. The fold line setting could be expressed by designing the internal line in horizontal, vertical, and diagonal directions according to the North American smocking design, and then setting the fold angle for each internal line. By setting fold angles of 0 degrees and 360 degrees according to the folding direction of the set internal line, the fabric was clearly folded and stable pleats were created. This study will contribute to the vitalization of the 3D virtual fashion content industry by analyzing and presenting the optimal expression method of sophisticated and complex pleats generated according to the North American smocking design pattern.

• 정보저장시스템학회:학술대회논문집
• /
• 정보저장시스템학회 2005년도 추계학술대회 논문집
• /
• pp.177-178
• /
• 2005

The load/unload behavior of the hard disk drive slider is studied in terms of the air bearing static characteristics. The numerical continuation methods are applied to calculate suspension force - equilibrium position curve. The critical preloads of the femto size slider are analyzed. The hi-stability conditions are depicted on the skew angle - preload diagram. The perturbation method is used to check the stability of the solution branches.

• 자원환경지질
• /
• 제13권3호
• /
• pp.141-158
• /
• 1980

A geologic structure could be formed through various processes, because there are a number of factors which control the deformation of the Earth's crust. In geology, we could call it geological epistemology to describe exactly a geologic structure, and call it geological logics to infer logically the deforming process through which the geologic structure had been formed. Degree of legitimacy of geological logics depends upon the degree of exactness of geological epistemology. This study described quantitatively 3-dimensional Hambaek Syncline through computer analysis, and examined qualitatively into its deforming mechanism based on the results of 3-dimensional analysis of the structure. Input data for the computer analysis are dips and dip directions of bedding planes of the structure. The Hambaek Syncline disclose a minor fold group of NE-SW or NNE-SSW trend and a large scale fold of E-W trend. The conclusions of this study are as follows: (1) The fold of E-W trend is primary fold $(F_1)$ and the minor fold group of NE-SW or NNE-SSW trend secondary fold $(F_2)$. (2) Hambaek Syncline is cylindrical type fold. (3) Apparent axial trace of Hambaek syncline does not coincide with true axial trace. The apparent axial trace is $N70^{\circ}-80^{\circ}W$ in Gohan and Sabuk area, and changes to $N70^{\circ}-80^{\circ}E$ in the westward of the area, while the true axial trace is $N40^{\circ}-70^{\circ}W$ in the former, and $N60^{\circ}-80^{\circ}E$ in the latter area. (4) Westward dipping of axial plane of the minor fold group of NE-SW or NNE-SSW trend can be attributed to simple shear movements along overthrusts. (5) Angle between axial trace and the directional trace of the maximum principal compressive stress $({\sigma}_1)$ may not be perpendicular each other. The angle between them is governed by the following factors; 1) the plunge of fold axis 2) the dip of axial surface 3) cylindrisity (6) The mean axial trace of Hambaek Syncline $(F_1)$ is $N45.6^{\circ}W$, and the directional trace of ${\sigma}_1$ is $N52.4^{\circ}E$ (7) The mean axial trace of the minor fold group of NE-SW or NNE-SSW trend $(F_2)$ is $N21^{\circ}E$, and the directional trace of ${\sigma}_1$ is $N22^{\circ}W$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.8-8
• /
• 2008

Two-dimensional photonic quasicrystal (PQCs) template patterns have been fabricated on a $1.1{\mu}m$-thick DMI-150 photoresist using a multiple-exposure holographic method. A 442-nm HeCd laser was utilized as a light source and the holographic exposure was carried out at a fixed angle of $\theta=6^{\circ}$. After the first holographic exposure, the sample was rotated to a proper angle and the second exposure was performed to the same manner. This exposure process was repeated n/2 times to obtain n-fold symmetric PQC patterns and then the sample was developed. The fabricated PQCs exhibited 8, 10 and 12-fold rotational symmetry and the diffraction patterns using a 632.8-nm HeNe laser were observed for n-rotation symmetry corresponding n-fold PQCs. The fabricated PQC template patterns were examined using scanning electron microscopy(SEM). Transmission spectra were measured fourier transform infrared(FTIR) spectrometer.

• 한국전기전자재료학회논문지
• /
• 제21권9호
• /
• pp.829-834
• /
• 2008

Two-dimensional photonic quasicrystal (PQCs) template patterns have been fabricated on a 1.1 ${\mu}m$-thick DMI-150 photoresist using a multiple-exposure holographic method. A 442-nm HeCd laser was utilized as a light source and the holographic exposure was carried out at a fixed angle of ${\theta}$ = 6$^{\circ}$. After the first holographic exposure, the sample was rotated to a proper angle and the second exposure was performed to the same manner. This exposure process was repeated n/2 times to obtain n-fold symmetric PQC patterns and then the sample was developed. The diffraction patterns of the fabricated PQC template were observed using a 632.8-nm HeNe laser. The fabricated PQCs exhibited 8, 10 and 12-fold rotational symmetry, which was in a good agreement with the interference simulation results. In addition, the diffraction patterns with n-rotation symmetry were observed for the corresponding n-fold PQCs. We believe that the multiple-exposure holography is a good method to fabricate the mesoscale PQCs with a high rotational symmetry.

• 대한후두음성언어의학회지
• /
• 제11권1호
• /
• pp.20-27
• /
• 2000

To determine what is the change of pre and postoperative voice and image analysis parameters and correlations between them, videostroboscopy was analyzed in each 18 patients with unilateral vocal cord paralyses or vocal polyps before and after the surgery from November, 1996 to April, 1999. The correlation between acoustic and aerodynamic parameters was investigated. The software-Videolink and $\pi$-View(Mediface Co, Seoul, Korea)-was used in a quantitative analysis. In unilateral vocal cord paralysis, the glottic angle is well correlated with maximum phonation time, jitter and shimmer preoperatively. The postoperative glottic angle is also correlated with preoperative maximum phonation time. In patients with the vocal polyp, the chink is postoperatively decreased, but the size of the chink and the polyp is not correlated with pre and postoperative voice analysis parameters. These findings reveal that glottic an and vocal fold angle are good indicators of e postoperative glottic configuration in unilateral vocal cord paralysis. Vocal fold ratio is also a useful indicator that represents the length of vocal folds. We consider that the computerized analysis through videostroboscopy is one of objective diagnostic methods in many voice disorders if we can measure a distance between the telelaryngoscope and vocal folds.

• 암석학회지
• /
• 제14권2호
• /
• pp.108-115
• /
• 2005

경기육괴 중앙부의 광주시 일대에 분포하는 선캠브리아기의 경기편마암 복합체는 흑운모호상 편마암 및 석영장석질 편마암으로 구성되어 있다 지질구조 분석결과 연구지역은 적어도 다섯 번의 변형작용을 받은 것으로 밝혀졌다. 첫 번째 변성작용(M1) 및 변형작용(Dl)중에 퇴적암(층리; S0)이 변성되어 흑운모호상 편마암으로 되었으며, 성분엽리(S1)가 발달되었다. 심성암이 관입 후 두 번째 변성작용(M2) 및 변형작용(D2)이 일어났으며, 이때 심성암이 엽리(S2)가 발달된 석영장석질 편마암으로 변하였다. 세 번째 변형작용(D3) 중에 수십 cm 규모의 밀착습곡 및 등사습곡(F3)이 발달하였으며, 축면방향으로 성분엽리(S3)가 발달하였다. 변위작용에 의해 뿌리 없는 습곡(F3)이 S3 엽리와 평행하게 발달되어 있다. 네 번째 변형작용(D4) 중에 남북방향의 압축력에 의해 약 100m의 축면분리를 가지는 F4 습곡이 동서 방향으로 발달하였다. 다섯 번째 변형작용 중에 동서 방향의 압축력에 의해 축면분리가 약 3km 규모의 남북 방향의 F5 습곡이 발달하였다. F5 습곡의 중심부에서는 F4 습곡에 F5 습곡작용이 중첩되어 F5 습곡의 습곡축면과 평행한 남북방향으로 F4 습곡이 발달되어 있으며 날개 사잇각 및 축면분리가 작아졌다. 반면에 F5 습곡의 서쪽 날개 지역에서는 북동방향으로, 동쪽 날개 지역에서는 북서방향으로 F4 습곡이 회전되었다. 연구지역에 발달되어 있는 엽리의 궤적은 주로 F4 습곡 및 F5 습곡에 의해 지배되어 있다. F4 습곡작용 동안에 취성변형작용에 의해 절리 및 단층이 발달하였으며 F5 습곡의 양쪽 날개부에는 부채꼴 절리가 우세하게 발달하고, 힌지대에는 be-절리가 우세하게 발달하였다 그 이후에 북서 방향의 주향이동 단층이 지질도 규모로 발달하였다. 제4기 동안에 발생한 산사태가 일부 절리 및 엽리의 방향을 반시계방향으로 약 $15^{\circ}$ 회전시켰다.

• Bulletin of the Korean Chemical Society
• /
• 제5권2호
• /
• pp.68-73
• /
• 1984

An enhancement of through-bond interaction by bond angle distortion in pyrazine was examined using various MO methods. Results of MINDO/3 geometry optimization with an angle (${\alpha}$) at $C_2$ atom fixed to 120∼90$^{\circ}$ lead to distorted structures in which the distorted bond is brought closer toward lone pair orbital n of N atom. It was also found that the bond angle distortion increased the P character at the atom $C_2$, resulting in an increased vicinal overlap between n and the $C_2-C_3$ bond. The FMO patterns of ${\sigma}$ framework showed three-fold degeneracy, one of which was of different symmetry which mixes in the symmetry adapted pair, $n_+\;and\;n_-;\;both\;n_+\;and\;n_-$ orbitals thus can interact with both FMOs of the ${\sigma}$ framework. The LCBO-MO analysis with partial elimination of bonds, antibonds or both, however, revealed that the main interaction of $n_+$ was with the HO-${\sigma}$ and that of $n_-$ was with the LU-${\sigma}^{\ast}$ orbital of the ${\sigma}$ framework.

• 한국의상디자인학회지
• /
• 제8권1호
• /
• pp.69-79
• /
• 2006

The purpose of this study is to find the proper width of fabric which can bring high efficiency on productivity. We focus on the marking method by comparing and analyzing the marking efficiency of A-line skirt. This study employs 4 criteria to mark the A-line skirt, which are cutting method, angle, width, and direction, respectively. There can be 2 different cutting methods(fold pattern and add seam pattern at the front and back center line), and 2 different angles(warp angle and bias angle). Also, width of the fabric can be classified into 2 groups(110cm, 150cm), and marking direction can be grouped into 2(one direction marker and one direction per each size marker). These 4 criteria make 16($2^*2^*2^*2$) cases for this study. Main findings are follows. First, the skirt with folded at the center line had higher efficiency rate than the skirt with add seam at the center line. Second, the skirt with the 150cm width has higher efficiency rate than that of 110cm. Third, fixing the warp angle has higher efficiency rate than that of fixing the bias angle at the front and back center line. Finally, one direction per each size marker has much higher efficiency than the one direction marker.