• 한국항공운항학회지
• /
• 제14권4호
• /
• pp.94-100
• /
• 2006

The purpose of this case study is to determine the possibility of Numerical Forecasting of sea fog at West Sea in spring time. For practical method of analyzing the data collected from 24th to 26th March 2003, Numerical Weather Prediction model MM5(Mesoscale Model Version 5) and synoptic field study using synoptic chart, upper level chart, and sea surface temperature were employed. The results of synoptic field analysis summarized that sea fog at West sea in spring is intensified by the inflow of the warm flow from west or southwest, low sea surface temperature to increase the temperature difference between air and sea surface, and inversion layer to disturb the disperse. It appears that the possibility of sea fog forecasting by MM5, in view of the result that the MM5 output is similar to the synoptic fields analysis.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1380-1382
• /
• 2003

Detection of sea fog by remote sensing with spectroscopic analysis method and structural analysis method is introduced in this paper. On this base, designing principles and frame of weatherproof detection system of sea fog by remote sensing are systemically explained. Using GMS5 and NOAA visible and infrared channel data, progresses of sea fog on yellow sea on April 17,18, 2001 is monitored which accord with the observing.

• International Journal of Computer Science & Network Security
• /
• 제22권4호
• /
• pp.310-328
• /
• 2022

Internet of things (IoT) has emerged as the most popular technique that facilitates enhancing humans' quality of life. However, most time sensitive IoT applications require quick response time. So, processing these IoT applications in cloud servers may not be effective. Therefore, fog computing has emerged as a promising solution that addresses the problem of managing large data bandwidth requirements of devices and quick response time. This technology has resulted in processing a large amount of data near the data source compared to the cloud. However, efficient management of computing resources involving balancing workload, allocating resources, provisioning resources, and scheduling tasks is one primary consideration for effective computing-based solutions, specifically for time-sensitive applications. This paper provides a comprehensive review of the source management strategies considering resource limitations, heterogeneity, unpredicted traffic in the fog computing environment. It presents recent developments in the resource management field of the fog computing environment. It also presents significant management issues such as resource allocation, resource provisioning, resource scheduling, task offloading, etc. Related studies are compared indifferent mentions to provide promising directions of future research by fellow researchers in the field.

• International Journal of Computer Science & Network Security
• /
• 제23권4호
• /
• pp.25-31
• /
• 2023

Fog computing diversifies cloud computing by using edge devices to provide computing, data storage, communication, management, and control services. As it has a decentralised infrastructure that is capable of amalgamating with cloud computing as well as providing real-time data analysis, it is an emerging method of using multidisciplinary domains for a variety of applications; such as the IoT, Big Data, and smart cities. This present study provides an overview of the security and privacy concerns of fog computing. It also examines its fundamentals and architecture as well as the current trends, challenges, and potential methods of overcoming issues in fog computing.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2021년도 춘계학술대회
• /
• pp.97-99
• /
• 2021

엣지 캐싱은 동영상 스트리밍 서비스에서 backhaul 네트워크의 트래픽을 감소시키고 응답 지연을 줄여 높은 QoE를 제공할 수 있다. 그러나 엣지 캐시의 용량은 제한적이기 때문에 많은 양의 컨텐츠를 캐싱할 수 없다. 본 논문에서는 동영상 콘텐츠의 prefix를 엣지에 캐싱하고 나머지 부분을 포그 캐시에 저장하여 재생 지연을 감소시키는 edge-fog prefix caching 기법을 제안한다.

• 대기
• /
• 제25권1호
• /
• pp.149-154
• /
• 2015

As an attempt to improve fog predictability at Incheon International Airport (IIA) we couple the 3D weather forecasting model currently operational in Korea Meteorological Administration (regional Unified Model, UM_RE) with a 1D turbulence model (PAFOG). The coupling is done by extracting the meteorological data from the 3D model and properly inserting them in the PAFOG model as initial conditions and external forcing. The initial conditions include surface temperature, 2 m temperature and dew point temperature, geostrophic wind at 850 hPa and vertical profiles of temperature and dew point temperature. Moisture and temperature advections are included as external forcing and updated every hr. To validate the performance of the coupled system, simulation results of the coupled system are compared to those of the 3D model alone for the 22 sea fog cases observed over the Yellow Sea. Three statistical indices, i.e., Root Mean Square Error (RMSE), linear correlation coefficient (R) and Critical Success Index (CSI), are examined, and they all indicate that the coupled system performs better than the 3D model alone. These are certainly promising results but more improvement is required before the coupled system can actually be used as an operational fog forecasting model. For the RMSE, R, and CSI values for the coupled system are still not good enough for operational fog forecast.

• 한국전기전자재료학회논문지
• /
• 제19권2호
• /
• pp.169-175
• /
• 2006

This study investigated variation leakage current maximum value and waveform considering applied voltage phase angel by simulating three environmental conditions, such as fog, salt fog, and kaolin contamination .As the result of applied voltage phase angel characteristics, leakage currents presented almost in phases in the early stage regardless of environmental conditions just after applying the voltage, and the phase of leakage currents certain phase lags for the discharge of the applied voltage when surface discharges occurred due to the continuous environmental contamination. In addition, the difference in phase significantly increased according to the intensity of discharges. The change in distortion rates according to the environmental contamination presented a nearly same level just after applying the voltage. The distortion rate of third harmonic for the fundamental wave presented by the order of fog>salt fog>kaolin when surface discharges occurred due to the applied voltage for certain continued periods. In the case of the fog and salt fog, the scale of spectrums decreased according to the increase in frequencies from the results of the analysis of high frequencies. In addition, the even number frequency presented a relatively large level compared to the odd number frequency under the kaolin contamination.

• International journal of advanced smart convergence
• /
• 제6권3호
• /
• pp.29-37
• /
• 2017

The current behavior recognition system don't match data formats between sensor data measured by user's sensor module or device. Therefore, it is necessary to support data processing, sharing and collaboration services between users and behavior recognition system in order to process sensor data of a large capacity, which is another formats. It is also necessary for real time interaction with users and behavior recognition system. To solve this problem, we propose fog cloud based behavior recognition system for human body sensor data processing. Fog cloud based behavior recognition system solve data standard formats in DbaaS (Database as a System) cloud by servicing fog cloud to solve heterogeneity of sensor data measured in user's sensor module or device. In addition, by placing fog cloud between users and cloud, proximity between users and servers is increased, allowing for real time interaction. Based on this, we propose behavior recognition system for user's behavior recognition and service to observers in collaborative environment. Based on the proposed system, it solves the problem of servers overload due to large sensor data and the inability of real time interaction due to non-proximity between users and servers. This shows the process of delivering behavior recognition services that are consistent and capable of real time interaction.

• 한국환경과학회지
• /
• 제25권3호
• /
• pp.405-415
• /
• 2016

We analyzed the micro-meteorological characteristics during typical steam fog over the Gumi Reservoir of Nakdong river with the field observation data for recent 2 year(1 April 2013~31 March 2015) collected by the national institute of meteorological research, KMA. Steam fog occur when the cold drainage flows over the warm water surface. As the sensible and latent heat from water are provided to the air, the instability of lower atmosphere is increased. The resultant vertical mixing of warm, moist air near water surface and cold air aloft causes the formation of status cloud. The convection strengthened by radiative cooling of the upper part of the stratus causes the fog to propagate downward. Also, the temperature at the lowest atmosphere is increased rapidly and the inversion near surface disappear by these processes when the fog forms. The increase of wind speed is observed because the downward transportation of momentum is caused by vertical mixing.

• 한국환경과학회지
• /
• 제16권5호
• /
• pp.583-591
• /
• 2007

In this study, meteorological characteristics concerning the occurrence of fog are analyzed using 4-years (2000-2003) data at Chuncheon. From the analysis of meteorological characteristics, the fog at Chuncheon occurred before sunrise time and disappeared after that time and lasted for 2-4 hours. When fog occurred, on the whole, wind direction was blew the northerly and wind speed was below 2.1 m/s. Especially, about 42 % of foggy day fell on the calm($0{\sim}0.2m/s$) conditions. The difference between air temperature and dew point temperature near the surface were mainly less than $2^{\circ}C$. For the lack of water surface temperature, the water sur-face temperature was calculated by using Water Quality River Reservoir System (WQRRS). In Chuncheon, there is close correlation between the frequency of fog day and outflow from Soyang reservoir and high frequency of occurrence due to the difference between air and cold outlet water temperature.