• 정보처리학회논문지B
• /
• 제12B권3호
• /
• pp.247-256
• /
• 2005

컴퓨터 비젼에 관한 고전적인 연구 주제들 중의 하나는 두 개 이상의 이미지로부터 3차원 형상을 재구성하는 3차원 변환에 관한 것이다. 본 논문은 단안 카메라로 촬영한 일반적인 2차원 영상물에서 능동적으로 움직이는 3차원 영상의 깊이 정보를 추출하는 문제를 다룬다. 연속하는 프레임들간의 영상 블록의 움직임을 평가하여 카메라의 회전과 배율효과를 보상하고 다음과 같은 두 개의 단계에 걸쳐 블록의 움직임을 추출한다. (i) 블록의 위치와 움직임을 이용하여 카메라의 이동과 초점거리에 대한 전역 파라메타를 계산한다. (ii) 전역 파라메타, 블록의 위치와 움직임을 이용하여 평균 영상 깊이에 대한 상대적인 블록의 깊이를 계산한다. 다양한 동영상을 대상으로 특이점인 경우와 그렇지 않은 경우를 실험하였다. 결과로 얻어지는 상대적인 깊이 정보와 객체는 인간이 판단하는 경우와 동일함을 보였다.

• 대한원격탐사학회지
• /
• 제27권4호
• /
• pp.411-420
• /
• 2011

본 연구는 디지털 항공사진으로부터 세계적 생태보존 지역인 순천만 갯벌의 퇴적 침식 변화를 탐지하는데 기초자료가 될 수 있는 DEM을 제작하였다. 이를 위해, 기준점으로 초점거리를 수정하고, 순천만 갯벌영상의 적합한 매칭사이즈를 제시하였으며, 불량매칭으로 인한 과대 위치오차 제거를 위해 교차거리($P_R$) 임계치 적용방법을 제안하였다. 그리고 현지 종단측량 자료를 통해 제안방법으로 제작된 DEM을 기존 상용 S/W로 제작된 DEM과 비교하였다. 그 결과 제작한 갯벌 DEM이 상용 S/W로 제작한 DEM 보다 해상도와 최대편차(-21cm)가 더 좋은 결과를 보였다. 이러한 결과를 토대로 향후, 본 연구에서 제안한 방법으로 갯벌 DEM을 제작할 수 있을 것이라 판단된다.

• 대한핵의학회지
• /
• 제25권1호
• /
• pp.87-94
• /
• 1991

To evaluate the diagnostic usefulness of quantitative sacroiliac joint scintigraphy and its clinical significance in the ankylosing spondylitis, we measured SIS ratio (Sacroiliac Joint/Sacrum Uptake ratio) by region of interest method in 52 patients with ankylosing spondylitis. As compared with radiological grade, SIS ratio was significantly elevated in the early stage of ankylosing spondylitis and returned to normal range in the late stage. Scintigraphic finding of focal uptakes of radiotracer at multiple spinal apophyseal joints was characteristic and proximal large joints were more involved than distal joints. The incidence and extent of the arthropathy revealed by scnitigraphy exceeded that which was clinically evident, and scintigraphy was more sensitive to detect symptomatic lesion than radiography. Therefore, it is suggested that bone scan is useful for the early diagnosis and the assessment of clinical activity of involved joints of ankylosing spondylitis.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제21권2호
• /
• pp.120-130
• /
• 1999

This investigation studied the effect of ovariectomy on the temporomandibular joint (TMJ) of rat. Forty female Sprauge-Dawley strain white rats, each weighing about 200grams were used and divided into two groups. The one group was performed ovariectomy, and the other was performed sham operation. Both group were killed at the intervals of 3 days, 1, 2, 4, and 8 weeks postoperatively, paraffin section were stained with H&E, MT and histomorphometric study of the TMJ was performed in a synchronous manner with an sham operated control group The result were as follows: 1. At 4 weeks after ovariectomy, an adhesion between the inferior surface of the articular disc and the condyle was observed in the central portion. At 8 weeks after ovariectomy, a focal thickening of the bone (osteophyte) was observed in anterior portion and there was a marked decrease in the trabecular bone in the posterior region. 2. The thickness of cartilage zone was increased at 2 weeks postopratively in the central portion, and decreased at 4 weeks postopratively in the posterior portion. The thickness of transitional zone was decreased at 1 week postoperatively in the anterior and proliferating zone was decreased postoperatively. The thickness of articular zone was decreased at 3 days postopratively in the anterior portion, and decreased at 1 week postoperatively in the central portion. From the above finding, we could conclue that estrogen deficiency in rats causes alteration of TMJ in marked early stage.

• 한국전기전자재료학회논문지
• /
• 제31권4호
• /
• pp.267-271
• /
• 2018

A high directivity TIR (total internal reflection) lens in the UV-A region was designed using a silicone resin, and a UV light source module with a maximum irradiation density of $150mW/cm^2$ was fabricated. The beam angle of the TIR lens was designed to be $8.04^{\circ}$ and the maximum diameter of the TIR lens was Ø13.5. A silicone resin having a UV transmittance of 93% and a refractive index of 1.4 at a wavelength of 365 nm was used, and the lens was manufactured using an aluminum mold, from which silicone could be easily released. The module was fabricated in a metal printed circuit board of COB (chip on board) type using a $0.75{\times}0.75mm^2$ UV chip. A jig was used to adjust the focal length between lens and chip and to fix the position of the lens. The optical characteristics such as illumination distributions of the lens and module were designed using 'LightTools' optical simulation software. The heat dissipation system was designed to use a forced-air cooling method using a heat-sink and fan.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제42권
• /
• pp.31.1-31.7
• /
• 2020

Background: Fibrous dysplasia (FD) is a rare, sporadic, and benign congenital condition in which normal cancellous bone is replaced by fibro-osseous tissue with immature osteogenesis. FD localized in the cranial and facial bones is called craniofacial fibrous dysplasia (CFD). Cystic degeneration in CFD cases is rare; cystic degeneration appearing in both the maxilla and the mandible FD lesion is even rarer. The aim of this article was to report a case of fibrous dysplasia of the mandible and maxilla complicated by nonspecific cystic degeneration. Case presentation: A 30-year-old woman presented with a rare case of non-specific cystic degeneration in a mandible and maxilla FD lesion that occurred 11 years after surgery. She was diagnosed with polyostotic CFD and underwent maxillary and mandibular bone contouring. Cyst enucleation under general anesthesia was performed in the mandibular region due to pain and discomfort. Conclusions: In cases involving non-aggressive and non-invasive FD cystic degeneration in focal areas, conservative treatment is recommended. However, if cystic degeneration of FD develops rapidly and causes discomfort, pain, or dysfunction, surgical treatment should be considered.

• 한국기계가공학회지
• /
• 제18권5호
• /
• pp.74-81
• /
• 2019

This study reports the CW $CO_2$ laser scribing of soda lime glass. In this study, scribing experiments are carried out at different laser powers, scan speeds, and focal positions to investigate the effect of the process parameters on the interaction characteristics between a laser beam and glass. In particular, the interaction characteristics are analyzed and described with the input laser energy per unit length. According to the experimental results, the damage threshold for the glass surface was found to exist between 0.072 and 0.08 J/mm. The input laser energy in this region induced partial melting of the surface and grain-shaped cracks. These cracks tended to increase as the input laser energy increased. At the laser input energy larger than 1 J/mm, a huge crack propagating along the scan direction was produced, and the volume below the scribed area was fully melted. The growth of this crack finally resulted in the complete cutting of the glass at the input laser energy above 8 J/mm. It was found that both the width and depth of the scribed line increased with increasing input laser energy. For the beam focusing at the rear surface, the width of the scribed line varied irregularly. This could be ascribed to the increased asymmetry of the beam intensity distribution when the laser beam was focused at the rear surface. Under this condition, a large burr was only produced on one side of the scribed line.

• 동남아시아연구
• /
• 제28권2호
• /
• pp.119-145
• /
• 2018

2017년 창설 50주년을 맞은 아세안(ASEAN)은 제도적 보완과 기능적 협력을 강화하기 위해 일련의 선언과 행동 계획을 채택했다. 아세안의 '회합력'(convening power)이 아세안 중심성(centrality)과 회복력(resilience)을 촉진하고 있다. 반면 아세안 회원국의 민주주의 후퇴는 전통적 규범의 한계를 심화시키고 아세안의 이행력을 저하시킨다. 이 글은 아세안 주요 쟁점을 고찰하고 전망을 도출하고자 한다. 첫째, 아세안의 제도적 발전과 기능적 협력의 현황을 아세안 공동체 건설의 현황과 쟁점을 중심으로 살피고자 한다. 둘째, 아세안의 대외 관계를 중국, 미국, 한국과의 관계를 중심으로 살피고자 한다. 남중국해 이슈 및 중국의 경제적 영향력 확대는 아세안-중국관계의 복잡성을 심화시키고 있다. 트럼프 행정부의 대 동남아 정책 변화에 대응하기 위해서는 아세안의 단결이 필요하다. 한국의 신남방정책은 여러 제약에도 불구하고 양자 관계에 있어 전환점이 될 것으로 기대된다. 대외 환경의 변화 속에 아세안 단결과 중심성의 강화가 더욱 절실해지고 있다.

• Korean Journal of Radiology
• /
• 제22권1호
• /
• pp.63-71
• /
• 2021

Objective: To identify the CT findings associated with treatment failure after antibiotic therapy for acute appendicitis. Materials and Methods: Altogether, 198 patients who received antibiotic therapy for appendicitis were identified by searching the hospital's surgery database. Selection criteria for antibiotic therapy were uncomplicated appendicitis with an appendiceal diameter equal to or less than 11 mm. The 86 patients included in the study were divided into a treatment success group and a treatment failure group. Treatment failure was defined as a resistance to antibiotic therapy or recurrent appendicitis during a 1-year follow-up period. Two radiologists independently evaluated the following CT findings: appendix-location, involved extent, maximal diameter, thickness, wall enhancement, focal wall defect, periappendiceal fat infiltration, and so on. For the quantitative analysis, two readers independently measured the CT values at the least attenuated wall of the appendix by drawing a round region of interest on the enhanced CT (HU_post) and non-enhanced CT (HU_pre). The degree of appendiceal wall enhancement (HU_sub) was calculated as the subtracted value between HU_post and HU_pre. A logistic regression analysis was used to identify the CT findings associated with treatment failure. Results: Sixty-four of 86 (74.4%) patients were successfully treated with antibiotic therapy, with treatment failure occurring in the remaining 22 (25.5%). The treatment failure group showed a higher frequency of hypoenhancement of the appendiceal wall than the success group (31.8% vs. 7.8%; p = 0.005). Upon quantitative analysis, both HU_post (46.7 ± 21.3 HU vs. 58.9 ± 22.0 HU; p = 0.027) and HU_sub (26.9 ± 17.3 HU vs. 35.4 ± 16.6 HU; p = 0.042) values were significantly lower in the treatment failure group than in the success group. Conclusion: Hypoenhancement of the appendiceal wall was significantly associated with treatment failure after antibiotic therapy for acute appendicitis.

• 대한방사선기술학회지:방사선기술과학
• /
• 제29권4호
• /
• pp.249-255
• /
• 2006

목 적: 양전자방출단층검사(Fluorine-18 2-Deoxy-D-Glucose positron emission tomography : $^{18}F-FDG$ PET)는 가시적 영상분석과 반정량적 섭취계수 분석 방법을 사용하여 폐의 염증성 질환과 폐암을 구별 및 진단하는 데 유용하다. 일반적으로 표준화섭취계수(Standardized Uptake Value : SUV)가 폐 질환의 진단에 사용되지만, 이는 폐 조직에 있어서 반정량적, 정량적 분석을 통한 동적인 정보를 포함하지 않는다. 그러므로, 본 연구는 $^{18}F-FDG$ PET 검사에서 폐 질환의 동적 섭취 분석이 보다 정확한 대상질환의 진단을 유용하게 할 수 있을 것이라는 가정하에 시간-방사능 곡선(Time-Activity Curve: TAC), 표준화섭취계수-동적곡선(Standardized Uptake Value-Dynamic Curve : SUV-DC), 패트락 분석법(Patlak analysis : Glucose Metabolic Rate(MRGlu))을 토대로 얻은 분석방법을 이용하여 진단적 유용성을 평가하였다. 대상 및 방법: 폐 질환을 가진 17명의 환자를 대상을 하여, 각각 60분간 Dynamic $^{18}F-FDG$ PET검사를 시행하였다. 획득한 정보를 통하여 폐질환의 형태를 따라 관심영역(Region of Interest: ROI)를 그린 후, 반정량적 분석인 TAC, SUV-DC와 정량적 분석인 Patlak analysis를 각각의 군에 따라 분석하여 비교 분석하였다. 결 과: Dynamic $^{18}F-FDG$ PET을 통한 분석결과, TAC 형태는 초기 혈류상에서 폐의 염증성 질환과 폐암의 구분이 어려웠으나, 시간이 지날수록 폐암의 곡선이 염증성 질환의 경우보다 확연히 증가하였다. SUV-DC의 경우는 TAC 형태와 거의 유사한 형태를 가졌다. Patlak analysis 분석결과, 대동맥 영역에서는 폐의 염증성 질환이 폐암보다 높은 혈액 방사능을 보였으나 시간이 지남에 따라 염증성 질환의 혈액 방사능이 극히 낮아졌다. 반면, 병변 조직에서는 폐암이 가장 높은 섭취를 보였으며 폐의 염증성 질환은 중간 정도에 머물렀다. 결 론: TAC와 SUV-DC 분석에서 폐암과 폐의 염증성 질환은 각각 고유한 그래프 형태를 띠었으며 Patlak analysis에서 역시 주목할 만한 차이를 보였다. 따라서 이러한 분석법을 토대로 좀더 깊이 있는 연구가 진행된다면 비침습적으로 폐의 질환을 구별하는 데 보다 적절하고 유용한 진단적 정보를 얻을 수 있을 것이다.