• 한국식품조리과학회지
• /
• 제6권3호통권12호
• /
• pp.9-15
• /
• 1990

Peanut prptein isolate was tested for the purpose of finding out the effect of pH, Sodium Chloride concentration and heat treatment on the solubility, surface hydrophobicity, foam expansion and foam stability. The solubility of peanut protein isolate was affected by pH and showed the lowest value at pH 4.5. When the peanut protein isolate was heated, the solubility decreased at pH 3 and pH 7 but at pH 9 solubility increased. At all pH range, solubility decreased as NaCl was added. The surface hydrophobicity of peanut protein isolate showed the highest value at pH 1.5. Generally, at acidic pH range the surface hydrophobicity was high, but at alkaline region, the surface hydrophobicity increased as the temperature increased. And when NaCl was added, the surface hydrophobicity was also increased. Foam expansion of peanut protein isolate was no significant difference among the values about pH. When the peanut protein was heated and NaCl was added, foam expansion was increased at pH 7. Foam stability was significantly low at pH 4.5 and foam stability was increased at acidic pH region below pH 4.5. At pH 7 and pH 9, heat treatment above $60^{\circ}C$ increased foam stability. When NaCl was added, foam stability was significantly increased at pH 3 and pH 7.

• Journal of Animal Science and Technology
• /
• 제53권3호
• /
• pp.253-259
• /
• 2011

The aim of this work was to determine the method and predict the optimum conditions for egg quality stored for 7 days when combination treatments of irradiation and chitosan coating were applied using response surface methodology (RSM). A central composite design was chosen for the RSM in this study and the factors were irradiation dose (0~2 kGy) and concentration of chitosan coating material (0~2%). Performance of the irradiation and chitosan coating were evaluated by analyzing the egg quality and functional property factors. The predicted maximum level of Haugh units and foaming ability calculated by a developed model were 74.19 at 0 kGy of irradiation with coating by 0.96% chitosan solution and 50.83 mm at 2.0 kGy with 1.01%, respectively. The predicted minimum value of foam stability and 2-thiobarbituric acid reactive substances (TBARS) value were 2.97 mm at 0.39 kGy with 0.21% and 0.54 mg malonaldehyde/kg egg yolk at 0 kGy with 0.90% of chitosan solution, respectively. Results clearly showed that gamma irradiation negatively affected the Haugh unit and TBARS but positively affected the foaming capacity. The estimated value from the developed model by RSM was verified by no statistical difference with observed value. Therefore, RSM can be a good tool for optimization and prediction of egg quality when 2 or more treatments are combined. However, one should decide the target quality first to achieve a successful implementation of this technology.

• 한국식품조리과학회지
• /
• 제9권4호
• /
• pp.317-322
• /
• 1993

Erotic acid함량이 높은 유채유(HEAR oil)와 erotic acid함량이 낮은 유채유(LEAR oil)에 대하여 팜유를 각각 30%, 50%, 70%의 비율로 단순혼합한 유채유와 ester 교환 혼합유채유를 제조하였다. 이들 혼합유채유의 혼합비율, 혼합방법을 달리한 때의 산화안정성을 알아보기 위하여 항온저장시($60\pm$2^{\circ}C$$)의 산값, 과산화물값, 유도 기간과 상대적항산화효과 및 요오드값을 측정하였다. 또한 혼합유채유의 튀김적성을 검토하기 위하여 거품형 성성을 측정하였다. 1) 혼합유채유는 팜유의 혼합비율이 증가됨에 따라 산값과 과산화물값이 매우 안정된 것으로 나타났으나, HEAR oil과 LEAR oil에 따른 차이는 거의 없었다. 또한, ester 교환 혼합유채유는 단순 혼합유채유보다 산값과 과산화물값의 초기값이 다소 높았으나 산패의 경향은 유사하였다. 2) 단순 혼합유채유는 유도기간이 HEAR oil의 유도 기간보다 약 2.4~4배 연장되었다. Ester 교찬 혼합유채유에서는 약 2~3.2배 연장되어 단순 혼합유채유의 유도기간이 다소 길어진 것으로 나타났다. 3) 혼합유채유의 요오드값은 혼합비율이 증가함에 따라 안정적으로 되었으나 혼합방법에 따른 요오드값의 차이는 거의 없는 것으로 보였다. 4) 팜유를 동량혼합한 경우가 가장 거품형성양이 많았으며, 혼합비율을 증가 또는 감소함에 따라 거품형성양은 감소되었다. 한편 ester교환 혼합유채유는 단순 혼합유채유보다 거품형성양이 약 28~40% 감소되었다. 이 상의 결과로 팜유 혼합유채 유는 HEAR oil과 LEAR oil보다 산화안정성이 매우 뛰어나며, ester교환으로 혼합할 경우 거품형성량이 감소될 수 있으므로 튀김유로의 사용효과가 우수할 것으로 생각된다.

• 한국응용과학기술학회지
• /
• 제30권2호
• /
• pp.312-319
• /
• 2013

이 연구는 글리시딜 숙시네이트 양이온 제미니 계면활성제의 합성에 관한 것이다. 제미니 계면활성제는 2-메틸 디소디움 숙시네이트와 에피클로로히드린, N, N-디메틸 도데실 아민을 사용하여 합성하였다. FT-IR과 $^1H$-NMR을 통해 물성을 확인하였다. 표면장력과 cmc 측정, 유화력 및 기포력을 각각 주어진 조건을 이용하여 측정하였다. 제미니 계면활성제의 표면장력은 33~34 dyne/cm이며 cmc 값은 $10^{-4}{\sim}10^{-3}mol/L$ 였다. 제미니 계면활성제의 유화력은 유기용매에서 더 우수하였고 기포력이 안정한 것을 확인하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제4권4호
• /
• pp.407-410
• /
• 1991

The relationship between the possible structural change due to chemical modifications and functionality changes was studied in pigskin collagen. Amino groups in collagen were modified by succinylation and reductive alkylation. Carboxyl groups were modified using carbodiimide. Thermal denaturation temperature of collagen increased remarkably by carboxyl groups modification whereas decreased by succinylation and reductive alkylation. Emulsifying capacity was improved by reductive alkylation and carboxyl groups modification while emulsion stability was improved by succinylation. Chemical modifications increased solubility whereas decreased the foaming capacity of collagen. Viscosity of collagen at various pH varied with methods of modification.

• Preventive Nutrition and Food Science
• /
• 제2권1호
• /
• pp.17-22
• /
• 1997

Casein was chemically modified with acetic, succinic, and maleic anhydride and changes in functional pro-perties were evaluated as affected by the degree of modification. Chemical modification resulted in casein with unique functional properties depending upon the type of anhydrid used and the degree of modification. It was possible to control heat coagulation, calcium precipitability, forming and emulsion capacity and stability. At pH 4.5 heat coagulation was 0% in the case 74.1% acetylated casein; on the contrary, succinylation and maleyation resulted in highly heat sensitive protein. Foaming properties were improved markedly by suc-cinylation and maleylation at pH 4.5. However, emulsifying properties were enhanced only by maleylation.

• 한국식품영양학회지
• /
• 제9권2호
• /
• pp.143-150
• /
• 1996

The studies was carried out to investigate ripening degree and functional properties of EMC produced with pancreatic protease and palatase ML. During production of EMC, the amounts of free amino acid and free fatty acid were increased with increasing the reaction time. The amount of total nitrogen(T-N) and water soluble nitrogen(WSN) were increased with increasing time. EMC had contents of 1.79eA T-N and 0.52o WSN at 60 min of hydrolysis time. SRI and FRI value had also a similar correlationship. On the gel filtration, 2 kinds of soluble proteining capacity was also shown in alkali solution. Furthermore the foaming stability had the same result as that of the solubility. The water absorption of EMC showed the highest level at pH 4.0 and 5.0.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.31-35
• /
• 2001

Slopping deteriorates the productivity and the stability of operation in BOF refining process, and hence POSCO has developed methods to predict and prevent slopping. Specific equipment was developed to measure the change of the reacting force to the oxygen-blowing lance against oxygen jet and the force was gathered and analyzed with the flow rate of oxygen and the height of lance. From this study, it was found that the reacting force is strongly correlated to the slag foam height. Currently, the modeling of the relation of the slag foaming level and the vertically acted force to lance is being approached for predicting the slopping.

• 한국식품영양과학회지
• /
• 제28권3호
• /
• pp.547-553
• /
• 1999

Effects of oligosaccharides substituted for sucrose on the sponge cake quality were investigated. Fructooligosaccharide and isomaltooligosaccharide were used as oligosaccharides. Oligosaccharides decreased batter specific gravity, and increased cake specific volume and expansion ratio, showing that oligosaccharides had higher foaming ability and foam stability than sucrose. Oligosaccharides darkened the crust and crumb color of cakes. Addition of oligosaccharides made cakes darker, softer, more moist and more acceptable as perceived by panels. The acceptability was significantly correlated with crust and crumb color, softness, moistness and flavor(p<0.01). The textural characteristics including hardness, chewiness and gumminess of cakes were decreased by replacing sucrose with oligosaccharides. The hardness, gumminess and chewiness among sensory characteristics were negatively correlated with acceptability(p<0.05). Therefore, oligosaccharides should be a good alternative for sucrose in cake making because the sponge cake quality was greatly improved by partial repacement of sucrose with oligosaccharides.

• 한국세라믹학회지
• /
• 제48권5호
• /
• pp.463-466
• /
• 2011

Wet foams formed through direct foaming were stabilized using various concentrations of amiphiphilic particles that could control pore size and porosity. These porous materials showed moderate strength upon compression with high porosity. Bubble size and wet foam stability were tailored by amphiphile concentration, particle concentration, contact angle, and pH of the suspension to obtain crack-free porous solid after sintering. Closed and open pores were obtained with sizes of 30~300 ${\mu}m$ and porosities of over 80%.