• Journal of the Korean Ceramic Society
• /
• v.46 no.1
• /
• pp.16-23
• /
• 2009

The porous pellets were prepared from porphyry by slurry foaming method. The effect of sintering temperatures on pore structure of porous porphyry pellets with different extension ratio ($E_R$) was investigated by specific surface area, water absorption and porosity, which changed with sintering temperatures. When the sintering temperatures increased from $975^{\circ}C$ to $1075^{\circ}C$, specific surface area and water absorption of the all samples decreased. In case of the sample with an equal sintering temperature, $E_R=3.0$ pellets had little influence on pore structure compared to the $E_R=2.0$ pellets. As a results, it was shown by SEM that facilitated formation of micro pores at $E_R=2.0$ pellets shrunk increasingly after sintering process. At $E_R=3.0$ and sintering temperature at $1025^{\circ}C$, optimum conditions of the porous porphyry porous pellets was found. Also, Escherichia coli removal efficiency of the silver-containing porphoyry porous pellets was measured for the feasibility as a antibacterial media. The antibacterial activity of prepared silver-containing sample was maintained above 90% for 40 days.

• Journal of environmental and Sanitary engineering
• /
• v.5 no.2
• /
• pp.95-102
• /
• 1990

Since the production of synthetic detergents in 1966, the demand of detergents increased rapidly during the past in Korea. Its production which was solely for donlestic consumption leaped from 402 tons in 1966 to 259387 tons in 1989. Practically all of these products were the anionic detergents primarily sodium salts of Alkyl Benzene Sulfonate(ABS). ABS persists for long periods in stream because of its resistance to triodegradation. Therefore synthetic detergents have been considered major contributors to water pollution. The detergents give a raise to be noted is foaming at sewage treatment plant and the drinking water contaminated by detergents have often been accompanying taste and odor. So the biodegradable Linear Alkyl benzene Sulfonate(LAS) has been adapted as the substituents for the Alkyl Benzene Sulfonate (ABS) since the 1980. However, the Inassive bubbles stemmed from use of synthetic detergents in the sewage treatment plant and the branch of tile Han River had been reported. Therefore, this investigation less undertaken so as to know the pollution of detergents in domestic sewage and the receiving river, and determine the biodegradation of synthetic detergents since ABS has been replaced by LAS in 1980. The study results on the pollution and biodegradation of synthetic detergents were as follows . 1. The major streams in Seoul were contaminated by synthetic detergents. The concentration of detergents were 2.48 mg/l of Anyangchon. 2. The biodegradation were determined by spontaneous settling and aeration. Since the LAS was substitute for ABS in 1980, detergents was more easy to biodegradable. The reduction ratio of Tanchon, Chungranchon, and Anyangchon were 15% , 11% and 16% by the settling and 76%, 77% and 82% by aerations for 5 days.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.4
• /
• pp.407-413
• /
• 2006

Artificial aggregates made by coal fly ash that is classified as an industrial by-product was tested to oxidize hydrogen sulfide under various testing conditions. For the determination of optimum condition for converting coal fly ash to aggregates, specimens were prepared by varying ratio of fly ash, cement, water content, and foaming agent. These specimens were tested to determine specific gravity, water absorption, and compressive strength. Specimens, which were used for the removal of hydrogen sulfide, were selected based on the measured specific gravity, water absorption, and compressive strength. Tests for hydrogen sulfide removal were performed via batch and column tests. Under the testing conditions used in this study, removal rates of hydrogen sulfide were linearly proportional to amounts of coal fly ash, and further increased when water was added.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.10
• /
• pp.865-871
• /
• 2016

In recent years, traditional scaffold fabrication techniques such as gas foaming, salt leaching, sponge replica, and freeze casting in tissue engineering have significantly limited sufficient mechanical property and cell interaction effect due to only random pores. Fused deposition modeling is the most apposite technology for fabricating the 3D scaffolds using the polymeric materials in tissue engineering application. In this study, 3D slurry mould was fabricated with a blended biphasic calcium phosphate (BCP)/Silica/Alginic acid sodium salt slurry in PCL mould and heated for two hours at $100^{\circ}C$ to harden the blended slurry. 3D dual-pore BCP/Silica scaffold, composed of macro pores interconnected with micro pores, was successfully fabricated by sintering at furnace of $1100^{\circ}C$. Surface morphology and 3D shape of dual-pore BCP/Silica scaffold from scanning electron microscopy were observed. Also, the mechanical properties of 3D BCP/Silica scaffold, according to blending ratio of alginic acid sodium salt, were evaluated through compression test.

• Korean Journal of Materials Research
• /
• v.24 no.2
• /
• pp.111-115
• /
• 2014

Titanium and its alloys are useful for implant materials. In this study, porous Ti-Nb-Zr biomaterials were successfully synthesized by powder metallurgy using a $NH_4HCO_3$ as space holder and $TiH_2$ as foaming agent. Consolidation of powder was accomplished by spark plasma sintering process(SPS) at $850^{\circ}C$ under 30 MPa condition. The effect of high energy milling time on pore size and distribution in Ti-Nb-Zr alloys with space holder($NH_4HCO_3$) was investigated by optical microscope(OM), scanning electron microscope(SEM) & energy dispersive spectroscopy(EDS) and X-ray diffraction(XRD). Microstructure observation revealed that, a lot of pores were uniformly distributed in the Ti-Nb-Zr alloys as size of about $30-100{\mu}m$ using mixed powder and milled powders. In addition, the pore ratio was found to be about 5-20% by image analysis, using an image analyzer(Image Pro Plus). Furthermore, the physical properties of specimens were improved with increasing milling time as results of hardness, relative density, compressive strength and Young's modulus. Particularly Young's modulus of the sintered alloy using 4h milled powder reached 52 GPa which is similar to bone elastic modulus.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.2979-2984
• /
• 2015

This paper has presented a new foaming technology of selective hybrid-structured polymer film with expanded pores. The porous structure of closed pore was firstly fabricated by applying the 355nm UV-pulsed laser to 0.1mm thick film that was uniformly mixed with PP pellets, copper powder, and CBA (Chemical Blowing Agent). In order to expand pore size of closed-cell shape, LAMO(Laser Aided Micro pore Opening) processing was conducted to heat the copper powder, and then the bigger pore size of closed-cell more than existing pore size was successfully formed because of rapid conduction of heated metal powder. From the experimental results, various process parameters such as laser fluence, intensity, scan rate, spot size and density of powder and CBA were considerably considered to reveal the correlation among the pore characteristics. In the future, a function experiment will be carried out to use the hybrid film of industrial applications.

• Journal of the Society of Disaster Information
• /
• v.15 no.3
• /
• pp.402-408
• /
• 2019

Purpose: The study want to verify application the medium expantion foam extinguisher of expantion foam rate and fire extinguishing Performance test because the medium expansion system can maintain the discharge distance less affected by air currents, and the foam agent can be used efficiently. Method: For the study, the medium-expansion testing apparatus was manufactured and with synthetic surfactant foam agent of (class B) fire extinguishing model, and Fire Performance was analyzed for foam expansion rate and the fire agent consumption was measured and analyzed. Results: We measured the medium-spray testing apparatus and found that the expansion rate was 26.1 times. The test results of a 20-unit fire extinguishing model show that the extinguishing time is faster than the high and low foam expansion. It has been analyzed that it is possible to apply a hand-operated with a hose reel or medium expansion apparatus. Conclusion: Considering that the foaming agent and the extinguishing performance of the medium foam ratio are excellent, It is necessary to introduce the technical standards of medium foam agent for the introduction of hand-operated equipment, such as hose reel or portable medium foam apparatus.

• Food Science of Animal Resources
• /
• v.42 no.3
• /
• pp.372-388
• /
• 2022

Insects have long been consumed by humans as a supplemental protein source, and interest in entomophagy has rapidly increased in recent years as a potential sustainable resource in the face of environmental challenges and global food shortages. However, food neophobia inhibits the widespread consumption of edible insects, despite their high nutritional and functional value. The own characteristics of edible insect protein such as foaming properties, emulsifying properties, gelling properties and essential amino acid ratio can be improved by drying, defatting, and extraction. Although nutritional value of some protein-enriched bread, pasta, and meat products, especially essential amino acid components was increased, replacement of conventional food with edible insects as a novel food source has been hindered owing to the poor cross-linking properties of edible insect protein. This deterioration in physicochemical properties may further limit the applicability of edible insects as food. Therefore, strategies must be developed to improve the quality of edible insect enriched food with physical, chemical, and biological methods. It was presented that an overview of the recent advancements in these approaches and highlight the challenges and prospects for this field. Applying these strategies to develop insect food in a more familiar form can help to make insect-enriched foods more appealing to consumers, facilitating their widespread consumption as a sustainable and nutritious protein source.

• Elastomers and Composites
• /
• v.58 no.1
• /
• pp.32-43
• /
• 2023

The worldwide use of polyurethane foam products generates large amounts of waste, which in turn has detrimental effects on the surroundings. Hence, finding an economical and environmentally friendly way to dispose of or recycle foam waste is an utmost priority for researchers to overcome this problem. In that sense, the glycolysis of waste flexible polyurethane foam (WFPF) from automotive seat cushions using different industrial-grade glycols and potassium hydroxide as a catalyst to produce recovered polyol was investigated. The effect of different molecular weight polyols, catalyst concentration, and material ratio (PU foam: Glycols) on the reaction conversion and viscosity of the recovered polyols was determined. The obtained recovered polyols are obtained as single or split-phase reaction products. Besides, the foaming characteristics and physical properties such as cell morphology, thermal stability, and compressive stress-strain nature of the regenerated flexible foams based on the recovered polyols were discussed. It was observed that the regenerated flexible foams displayed good seating comfort properties as a function of hardness, sag factor, and hysteresis loss compared to the reference virgin foam. With the growing demand for a sustainable and circular economy, a global valorization of glycolysis products from polyurethane scraps can be realized by transforming them into profitable substances.

• Journal of the Korea Institute of Building Construction
• /
• v.14 no.4
• /
• pp.301-307
• /
• 2014

In order to reduce the emission of carbon dioxide($CO_2$), this research use blast furnace slag in concrete manufacture, as 100% replacement of cement. The aim of this study is to investigate the density and strength properties of alkali-activated lightweight composites with alkali activators of different types and different amounts. The bubble for achieving the lightweight of alkali-activated lightweight composites was generated in the reaction between the paper ash and the alkali activators instead of using a foaming agent. Lightweight formed concrete was conducted basic experimental for determining replacement ratio of paper ash. Then, the density and strength were measured according to the types and the contents of the alkali accelerator that can react with the paper ash. As results, the optimum replacement ratio of the paper ash was 5%. The alkali activator containing NaOH 12.5% obtained the lowest weight of $1.13g/cm^3$. Also, compressive strength were relatively high. Therefore, this study demonstrated that alkali accelerator with a certain amount of NaOH can achieve relatively high strength and lightweight alkali-activated lightweight composites.