• Elastomers and Composites
• /
• 제41권3호
• /
• pp.147-156
• /
• 2006

본 연구에서는 발포체의 가황거동과 발포특성에 발포온도 및 카본블랙 함량이 미치는 영향을 조사하기 위해 카본블랙을 변량 배합하고 $145^{\circ}C$에서 $165^{\circ}C$까지 $5^{\circ}C$ 간격으로 발포하여 천연고무 발포체를 제조하였다. 발포온도 및 카본블랙 함량이 증가함에 따라 $t_{s2}$ 그리고 $t_{90}$의 감소 경향이 관찰되었다. 본 연구에서 천연고무의 발포 가황특성의 최적 온도는 $165^{\circ}C$ 였으며 이때 발포된 천연고무 밀도가 가장 낮은 것으로 확인되었다. $145^{\circ}C$에서 발포된 천연고무발포체의 가교속도지수가 가장 작은 값을 보였다. 발포 천연고무의 발포 및 모폴로지 특성으로부터 발포체의 밀도 특성을 확인할 수 있었다. 고무내부에 생성된 각 발포 격벽의 두께는 발포온도가 증가함에 따라 감소하는 반면 카본블랙 함량 증가와 더불어 증가함을 보였다.

• KIEAE Journal
• /
• 제10권3호
• /
• pp.89-96
• /
• 2010

In comparison with ordinary or heavy-weight concrete, light-weight air void concrete has the good aspects in optimizing super tall structure systems for the process of design considering wind load and seismic load by lightening total dead load of buildings and reducing natural resources used. Light-weight air void concrete has excellent properties of heat and sound insulating due to its high amount porosity of air voids. So, it has been used as partition walls and the floor of Ondol which is the traditional Korean floor heating system. Under the condition of which the supply of light-weight aggregates are limited, the development of light-weight concrete using air voids is highly required in the aspects of reduced manufacturing prices and mass production. In this study, we investigated the physical properties and thermal behaviors of specimens that applied different mixing ratios of foaming agent to evaluate the possibility of use in the structural elements. We proposed the estimating equation for compressive strength of each mix having different ratio of foaming agent. We also confirmed that the density of cement matrix is decreased as the mixing amount of foaming agent increase up to 0.6% of foaming agent mixing ratio which was observed by SEM. Based on porosity and compressive strength of control mortar without foaming agent, we built the estimating equations of compressive strength for mortars with foaming agent. The upper limit of use in foaming agent is about 0.6% of the binder amount. Each air void is independent, and size of voids range from 50 to $100{\mu}m$.

• 소성∙가공
• /
• 제18권3호
• /
• pp.256-261
• /
• 2009

Polyurethane has been one of the most important materials for automobile elastic parts such as bumper, head rest, instrument panel and so on since it covers very wide range of mechanical characteristics with low production costs. The processing variables such as formulation of ingredients and mold temperature, mixing speed, etc. can affect the quality of produced polyurethane foams so that process conditions should be determined appropriately. In this study, foaming behaviors of semi-rigid polyurethane were investigated by conducting cup foam tests with two major processing variables such as environmental temperature and blowing agent content. In addition, it was verified that processing conditions of real practice can be determined effectively by considering foaming characteristics obtained by the cup foam tests.

• 폴리머
• /
• 제37권4호
• /
• pp.494-499
• /
• 2013

이축압출기(twin screw extruder)를 이용하여 용융상태에서 furfuryl sulphide를 분지제로 개질 폴리프로필렌(modified polypropylene, m-PP)을 제조하고, 층상 실리케이트와 다중벽 탄소나노튜브(multi-walled carbon nanotube, MWCNT)와의 m-PP/나노필러 복합체를 제조하였다. m-PP의 화학구조와 열적 특성은 적외선분광기(FTIR), 시차주사열용량분석기(DSC)를 이용하여 관찰하였다. m-PP의 화학구조는 3100 $cm^{-1}$에서 나타나는 분지제의 =C-H 신축진동피크를 이용하여 확인하였고, 용융온도는 큰 변화를 보이지 않았지만 결정화온도는 $10-20^{\circ}C$ 가량 증가하였다. m-PP/나노필러 복합체의 유변학적 특성과 분산성 및 발포거동은 동적유변측정기, X-선 회절분석기(XRD), 주사/투과전자현미경(SEM/TEM)을 이용하여 관찰하였다. m-PP/나노필러 복합체의 낮은 주파수 영역에서의 복합점도와 용융탄성이 증가하였으며, 전단담화(shear thinning) 효과 또한 증가하였다. 순수 PP와 비교할 때 m-PP와 m-PP/나노필러 복합체의 발포 거동 개선효과가 우수한 것을 확인하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.106-109
• /
• 2008

Polyurethane has been one of the most important materials for automobile elastic parts such as bumper, head rest, instrument panel and so on since it covers very wide range of mechanical characteristics with low production costs. The process variables such as formulation of ingredients and mold temperature, mixing speed, etc. can affect the quality of produced polyurethane foams so that process conditions should be determined appropriately. In this study, foaming behaviors of semi-rigid polyurethane were investigated by conducting cup foam tests with 2 major process variables such as environmental temperature and blowing agent content.

• 한국표면공학회지
• /
• 제29권1호
• /
• pp.15-25
• /
• 1996

자동차엔진의 피스톤-링에 응용할 목적으로 플라즈마 용사 기술로 피막한 몰리부덴늄 및 코발트 합금 피막 층의 마모성질을 비교 조사하였다. Ball-on-disc 형태의 마모기를 사용하여 상온 및 대기 중에서의 마모 및 마찰거동에 대하여 조사하였다. 용사 층의 미세경도 시험도 행하였으며, 용사층의 결정구조를 알기 위해 용사층을 x-선 회절 방법으로 분석하였다. 주사전자현미경을 사용하여 마모면의 표면 형상을 관찰하였다. 여러 용사조건으로 만든 용사층의 미세경도치와 마모거동과의 상관관계를 이해하려고 시도하였다. 주사전자현미경과 EDX를 사용하여 마모시 화학반응층과 마모기구를 규명하고자 하였다. 모리부덴늄 및 코발트 합금 분말을 각각 플라즈마 용사층의 단면을 관찰하여 마모기구을 비교하였다.

• 한국생활과학회지
• /
• 제14권5호
• /
• pp.821-832
• /
• 2005

The purpose of this study is to investigate bathing habits and behaviors, and to find out consumers' needs for washcloth, which in this case refers to Korean exfoliating cloth for bathing purpose. Subjects of this study were females of 20s to 50s living in urban area. Four hundred and twenty-six (426) women were interviewed with a structured questionnaire. Data were analyzed by ANOVA, factor analysis, correlation analysis, MDS. The results of this study are briefly summarized as follows: The most popular bathing type was shower (84.9%). Personal hygiene was one of the commonest purpose of bathing, and other purposes included health maintenance, stress alleviation, and beauty in order. Dimensions of consumer needs for washcloth were extracted from factor analysis as following properties: tactile, tough, aesthetic, constructive, and hygienic. The preference for washcloth type was related to skin type. "Non-skin damage property" was the most important parameter to choose washcloth and the other parameters included massage effect, tactile property, foaming property, and easy-to-use property.