• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.611-616
• /
• 2001

This paper analyzed PFC of active clamp ZVS flyback converter by adding two methods PFC (power Factor Correction) circuit - two-stage and single-stage. The addition of active clamp circuit also provides a mechanism for achieving ZVS of both the primary and auxiliary switches. ZVS also limits the turn off di/dt of the output rectifier, reducing rectifier-switching loss and switching noise, due to diode reverse recovery. As a result, the proposed converters have characteristics of the reduced switching noise and high efficiency in comparison to conventional flyback converter. The simulation and experimental results show that the proposed converter improve the input PF of 300W ZVS flyback converter by adding single-stage, two-stage PFC circuit.

• Proceedings of the KIPE Conference
• /
• 2003.07a
• /
• pp.102-105
• /
• 2003

The leakage inductance of the High frequency Transformer(HFT) in the flyback topology can be used an inductor of the Low Pass Filter(LPF) to reduce ripple and ripple noise in the output voltage. But, the values of leakage inductance and magnetizing inductance in the HFT are within $\pm20[{\%}]$). And the operating temperature of the HFT increased by the leakage inductance. Therefore, the leakage inductance of the HFT in the flyback topology has minimum and the LPF has non-polarity ceramic capacitor in the output stage. In this paper, the LPF in the flyback topoBogy takes PCB capacitor using double layer of PCB without non-polarity ceramic capacitor. Its experimental results show the reduced ripple noise and the reduced ripple in the output stage.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.9
• /
• pp.81-88
• /
• 2015

LED has been great attentions in lighting industry because of its long life-time, high efficiency, excellent light output characteristics. However, the life-time of the LED driving system is decreased because of the electrolytic capacitor which is used in the power conversion system for driving LED lighting. Therefore the capacitance reduction methods have been studied to replace an electrolytic capacitor with film or tantalum capacitor. This paper presents the Single stage PFC flyback converter with the simplified third harmonic current injection circuit to reduce output capacitance and the proposed system is theoretically analyzed and verified through the experiment.

• Proceedings of the KIPE Conference
• /
• 2007.11a
• /
• pp.187-189
• /
• 2007

본 논문에서는 연료전지 발전시스템을 제안하였다. 제안된 시스템에서 DC-DC 컨버터는 인덕터 에너지 저장형인 Flyback 컨버터와 커패시터 에너지 저장형인 SEPIC 컨버터를 변압기를 이용하여 2차측 출력을 결합한 SEPIC-Flyback 컨버터로 스위치의 온 오프시 모두 승압이 가능하여 저전압/대전류의 특징을 갖는 연료전지 시스템에 적합하다. 이를 계통연계형 인버터 시스템에 적용하여 최적화된 연료전지 발전시스템을 제안하였다.

• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.136-139
• /
• 1997

The active-clamped double forward-flyback converter is studied in this paper. The converter reduces the voltage stress of the switches and decreases switching loss, EMI. The energy stored in the magnetic core is transferred to both the input voltage source and the flyback output. This makes it possible the output circuit of the flyback to operate at CCM without complex control circuit. The MOSFET is used at output stage, which decreases switching loss.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.3
• /
• pp.186-195
• /
• 2008

This paper studies the operating characteristics of the high voltage flyback converter including the resonant elements. The detailed mode analysis and the design procedure are presented in designing a high voltage flyback converter. To verify and to confirm the validities of the presented analysis and design procedure, the computer simulation and the experiments have been performed.

• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2695-2697
• /
• 1999

A new three-phase voltage-fed inverter using partial resonant converter with high power factor and high efficiency is proposed. The proposed Flyback converter is constructed by using a resonant network in parallel with the switch of the conventional converter. The devices are switched zero voltage or zero current eliminating the switching loss. This paper introduces elimination of harmonics compared with conventional SPWM inverter and three-phase voltage-fed inverter using Flyback converter.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1016-1017
• /
• 2015

본 논문은 최근 에너지 절약의 중요성이 커지면서 많은 관심을 가지고 있는 1차측 제어(PSR : Primary Side Regulation) Flyback 컨버터에 관한 연구이다. 낮은 부하 상태에서의 전원장치의 전력변환 효율을 증가시키기 위해서는 전력손실회로의 제거 및 대체가 중요하다. 본 논문에서는 낮은 부하 상태에서 상대적으로 전력소모가 큰 2차측 제어회로를 제거하고 보조권선 전압에 반영된 출력전압의 정보를 검출, 보존하도록 하여 Flyback 컨버터의 제어기 구현이 가능하도록 하는 출력전압 정보 검출회로를 설계하였다. 회로의 설계 및 검증은 Magnachip 0.35um, 700V CMOS 공정을 이용하였다.

• Journal of Power Electronics
• /
• v.2 no.3
• /
• pp.212-219
• /
• 2002

A novel mode of parallel operation of a modular 3-phase AC-DC flyback converter for power factor correction along with tight regulation was recently analyzed and presented. The advantage of the proposed converter does not require expensive high voltage and high current devices that are normally needed in popular boost type 3-phase converter. In this paper tile detailed small signal analysis of the modular 3-phase AC-DC flyback converter is provided for control purpose and also experimental results are included to confirm the validity of the analysis.

• Journal of the Semiconductor & Display Technology
• /
• v.5 no.3 s.16
• /
• pp.11-16
• /
• 2006

A low cost PDP sustain power supply is proposed based on flyback topology. By using Boundary Conduction Method(BCM) to control input current regulation, DCM condition can be met under all load conditions. Another feature of the proposed method is that a excessive voltage stress due to the link voltage increase can be suppressed by removing link capacitor and suggest new 'Level-shifting switch driver'. this new gate driver is improved 66% of efficiency than switching loss of a existed push-pull amplifier. The proposed converter is tested with a 400W(200V-2A output) prototype circuit.