• YAKHAK HOEJI
• /
• v.55 no.3
• /
• pp.273-276
• /
• 2011

Synthetic studies directed toward an ortho-fluorination of phenols are described. With eugenol as the test compound, effects of base, fluorination agents, and solvents on ortho-fluorination has been investigated.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.6
• /
• pp.1337-1340
• /
• 2009

Electrical properties of a fluorinated carbon black (CB)-filled high-density polyethylene (HDPE) polymeric switch were investigated as a function of fluorination pressure at 0.1 ~ 0.4 MPa. From the FT-IR results, the absorption spectra of the fluorinated CB show an absorption band at 1400 ~ 1000 $cm^{-1}\;for\;{\nu}_{C-F}$ and the peak intensity increased with increasing fluorination pressure. Also, the analysis of XPS spectra of the fluorinated CB indicated that fluorine content increased with increasing fluorination pressure. Meanwhile, the surface free energy of the fluorinated CB decreased with increasing fluorination pressure. Consequently, the increase of fluorine contents of CB made a disappearance of negative temperature coefficient (NTC) behavior of the polymeric switch, which was probably due to the reduction of CB reaggregation after melting point of the HDPE, resulted from the decreasing of London dispersive component of the surface free energy for CB particles.

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.4 no.1
• /
• pp.11-15
• /
• 2018

Electrophilic fluorinating reagents are typically efficient for carbon-fluorine (C-F) bonds formation due to their higher reactivity even under mild condition. Thus, they have been playing an important role to improve C-F bonds formation reactions via direct fluorination reaction with electrophilic fluorinating reagents or transition metal catalysis. Advances on the recent fluorination methods are mainly results of $Selectfluor^{TM}$'s capability on facile fluorination. In this mini-review, we describe synthesis and application of four old yet popular electrophilic fluorinating reagents such as N-fluorobenzenesulfonimide (NFSI), N-fluoropyridinium salts, $Selectfluor^{TM}$, and N-fluorosultam.

• Carbon letters
• /
• v.28
• /
• pp.66-71
• /
• 2018

To improve the flame retardant performance of cellulose fibers, fluorine functional groups were introduced under various controlled fluorination conditions. The properties of the fluorinated cellulose fibers were analyzed by X-ray photoelectron spectroscopy and a thermogravimetric analysis. The fluorine functional group content in the fluorinated cellulose fibers increased with an increase in the fluorination temperature. However, the fluorination reaction increased the char yield and decreased the rate of degradation of the cellulose fibers by introducing donors, enabling the formation of a thick and compact char layer. Therefore, the flame retardant properties of cellulose fibers were improved following the fluorination treatment.

• The Journal of Advanced Prosthodontics
• /
• v.10 no.3
• /
• pp.205-210
• /
• 2018

PURPOSE. The purpose of this study was to evaluate the efficiency of a gas-phase fluorination method under different fluorination periods through using two resin cements. MATERIALS AND METHODS. 84 zirconia specimens in dimensions of $5mm{\times}5mm{\times}2mm$ were prepared and surface treated with $50{\mu}m$ aluminum oxide particles or gas phase fluorination for 2 min, 5 min, or 10 min. One specimen in each group was surface analyzed under scanning electron microscope. The remaining specimens were bonded to composite cylinders in dimensions of 2 mm diameter and 3 mm high with Panavia SA Plus or Variolink N. Then, the specimens were stored in $37^{\circ}C$ distilled water for 24 hours and shear bond strength test was applied at a speed of 1 mm/min. RESULTS. The highest shear bond strength values were observed in the samples fluorinated for 5 minutes and cemented with Panavia SA Plus. Variolink N did not elicit any statistical differences between surface treatments. Panavia SA Plus resin cement and Variolink N resin cements featured statistically significant difference in shear bond strength values only in the case of 5 minutes of fluorination treatment. CONCLUSION. According to the results of this study, application of 5 minutes of fluorination with 10-methacryloyloxydecyl dihydrogen phosphate monomer (MDP) containing Panavia SA Plus resin cement increased the resin bond strength of zirconia. Fluorination of the zirconia surface using conventional resin cement, Variolink N, did not lead to an increase in bond strength.

• Transactions of the Korean hydrogen and new energy society
• /
• v.17 no.1
• /
• pp.47-54
• /
• 2006

Activated carbon fibers (ACFs) with high surface area and pore volume were modified with metal Ni impregnation and fluorination and investigated hydrogen storage properties by volumetric method. Micropore volume values of ACFs obtained from surface modification with Ni impregnation and fluorination were decreased 9 and 35 %, respectively. Hydrogen storage capacities of fluorinated ACFs were slightly changed, on the other hand, that of Ni impregnated ACF was considerably increased. It means that hydrogen was not only adsorbed on ACF surface, but also on Ni metal surface by means of dissociation. Although the microphone volume of ACF modified with fluorination was decreased, its hydrogen storage were found not to be changed compared with fresh ACF. These results indicated that the surface of ACF after fluorination modification may be strongly attracted hydrogen due to high electronegativity of fluorine. Therefore, it was proven that hydrogen storage capacity was related with micropore volume and surface property of carbon materials as well as specific surface area.

• Membrane and Water Treatment
• /
• v.2 no.1
• /
• pp.39-49
• /
• 2011

We investigated about the utilization improvement of the PDMS and fluoropolymers by mutual application in environmental analysis. We were conducted the direct fluorination with mild condition on the PDMS films and analyzed its surfaces before and after fluorination. The results of FTIR and SEM analysis on the PDMS films showed that the film surfaces were fluorinated without irreversible deformation by the fluorination. During the fluorination, the measured contact angles of water and several alcohols on the PDMS films decreased with time and that of most alcohols decreased to 0 after 30 minutes. The surface energy of fluorinated PDMS films has increased by 2 times. Also, we investigated the influence factors on the change of permeation rate of water through PDMS tubes with time. It was observed that the change of permeation rate of water through PDMS tube was affected by temperature, water phase and spatial distribution of water. From these results, we could verify the principal causes of the decrease of permeation rate of water through PDMS tube with time and proposed a new experimental setup for reducing the variation of permeation rate of water less than 2%.

• Journal of the Korean Chemical Society
• /
• v.8 no.4
• /
• pp.135-141
• /
• 1964

The reaction of potassium fluoride with amyl iodide in presence of dimethylformamide at low temperature gave a fluorination product together with decane. Polyhalogenated acid such as ${\alpha}$, ${\beta}$,-dichloro-${\beta}$-phenyl-propionic acid gave ${\alpha}$-chlorostyrene, fluorinated styrene, and fluorinated acid. The same reaction with the ethyl ester did not give the fluorination product and gave a mixture of various dimerized product. Dibromostyrene gave bromostyrene together with fluorination product. Iodo acid such as m-iodo acid gave the salt and a trace quantity of dimerized product. Iodides such as m-iodotoluene and 1-amino-4-iodo-2-methyl benzene did not show any appreciable reactivity towards potassim fluoride. The reaction condition was described, and fluorination, ${\alpa}$-dehydrofluorination, decarboxylation, and dimerization were discussed.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.9
• /
• pp.2071-2076
• /
• 2009

The single-walled carbon nanotubes (SWCNTs) produced by chemical vapor deposition (CVD) were directly fluorinated with fluorine ($F_2$) gas in a temperature range 20 ~ 400 ${^{\circ}C}$. The surface properties and morphology of the SWCNTs were investigated in terms of fluorination temperature. As a result, Raman spectra showed a pair of bands at 1340 and 1590 $cm^{-1}$ peculiar to disordered $sp^2$-carbons. These results indicated that C-F bonds were formed on the rear surfaces of the nanotubes by fluorination, while the external surfaces as well as the layers between the internal and external surfaces retained their $sp^2$-hybridization. XPS analysis exhibited that fluorine atoms were bonded to carbon atoms on internal surfaces (rear surfaces) of the nanotubes and the amount of fluorine attached on the nanotubes was increased with increasing the fluorination temperature. Consequently, the direct fluorination of carbon nanotubes led to functionalization and modification of pristine nanotubes with respect to surface and morphological properties.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.4
• /
• pp.599-602
• /
• 2005

The aromatic fluorination method involving the acid-catalyzed decomposition of a triazene in an ionic liquid is a very convenient and efficient way to prepare a variety of aromatic fluorides in a lab-scale. It should be particularly useful for the preparation aryl fluorides substituted with electron withdrawing substituents. Fluorination of triazene 1 (1.0 mmol) and p-toluenesulfonic acid (1.2 mmol) in an ionic liquid, 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][$BF_4$], 2.5 mL) proceeds very smoothly at 80 ${^{\circ}C}$ with or without an external source of fluoride, providing 73% yield in 30 min. Unlike diazonium salts, triazene precursors are stable enough to be stored for a long period of time without a noticeable decomposition.