• Nuclear Engineering and Technology
• /
• v.53 no.6
• /
• pp.1931-1938
• /
• 2021

Uranium ingot is produced by metallothermic reduction of uranium tetrafluoride using magnesium or calcium as reductant. Presence of oxygen containing compounds viz. uranyl fluoride and uranium oxide in the starting uranium fluoride has a significant effect on the firing time, final temperature of the charge, slag-metal separation and hence the metal recovery. As reported in the literature, the maximum tolerable limit for uranyl fluoride in the UF₄ is 2.5 wt% and limit for uranium oxide content is in the range 2-3 wt%. No theoretical or experimental basis is available till date for these limits. Analyses have been carried out in this study to understand the effect of UO₂F₂ concentration in the starting fluoride on the final temperature of the products and thus the reduction characteristics. UF₄ having uranyl fluoride concentration, less than as well as more than 2.5 wt%, have been investigated. Thermodynamic calculations have been carried out to arrive at a general expression for the final temperature attained by the products during calciothermic reduction of UF₄. Finally, an upper limit for the oxygen containing impurities has been estimated using the CaO-CaF₂ phase diagram.

• Journal of dental hygiene science
• /
• v.10 no.5
• /
• pp.373-378
• /
• 2010

To test the effects of representative fluoride vanishes-1.23% APF gel and 5% NaF Fluoride Varnish-on the surface structure of pit and fissure sealant, this study classified samples of pit and fissure sealant into five groups: Group I deposited in distilled water for ten minutes, Group II treated with APF gel for one minute, Group III treated with APF gel for four minutes, Group IV treated with Fluoride Varnish for one minute, and Group V treated with Fluoride Varnish for four minutes. An abrasion test was carried out to measure changes in weight, along with observation of the surface structure by using an optical microscope, consequently drawing the following conclusions. 1. The results of the abrasion test using pit and fissure sealant, Concise, showed that Group III had the reduction in weight more increased than Group I and that Group V had less reduction in weight (p<0.05); the results of the abrasion test using Eco-S showed Group III had the reduction in weight more increased than Group I and that Group V had less reduction in weight (p<0.05). 2. The results of observation using an optical microscope showed that application of APF gel made the filler remarkable due to loss of substrate and that Group III treated with APF gel for four minutes had the toughest surface, followed by Group II treated with APF gel for one minute, Group I deposited in distilled water for ten minutes, Group IV treated with Fluoride Varnish for one minute, and Group V treated with Fluoride Varnish for four minutes.

• Korean Journal of Food Science and Technology
• /
• v.22 no.2
• /
• pp.172-176
• /
• 1990

Electrocondensation method using aluminum electrodes was developed to remove excess amount of fluoride contained in Antarctic krill. Fluoride amount was reduced differently according to fluoride forms (total, ionic and bound) and sections (whole, muscle flesh and chitinous) of the Antarctic krill during electrocondensation process. Total, ionic and bound fluoride could be reduced by 56%, 35% and 60% of the initial amount contained in the whole body, respectively and reduced by 49%, 57% and 34% of the initial amount in the muscle flesh, respectively by electro condensation process for 120 min. In the case of chitinous section of the Antarctic krill, 68% of total fluoride could be decreased by this process for 120 min.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.23 no.2
• /
• pp.306-326
• /
• 1996

The purpose of this study was to compare the enamel fluoride uptake and anticariogenic effect following topical application with different physical form of fluoride and application time. The results can be summarized as follows: 1. While the 4-minute applicaton increased the enamel fluoride uptake significantly than 1-minute application regardless of physical form of applied topical fluoride agents, no siginificant difference could be found between foam and gel type when applied for the identical period of time. 2. The application time or the physical form of topical agents had no singificant influence on the reduction of caries lesion. 3. Based upon the above-mentioned results of this study, it cannot be concluded that the amount of enamel fluoride uptake has an absolute impact on the change of lesion depth. Therefore, the clinical application of 1-minute topical fluoride application which appears to have a similar anticariogenic efficacy to 4-minute fluoride application may be encouraged.

• Journal of Oral Medicine and Pain
• /
• v.21 no.2
• /
• pp.207-224
• /
• 1996

This study was designed to determine the most effective concentration of fluoride and energy density of laser irradiation for the anticarious effect. For this study surface hardness in enamel was measured before and after irradiation with pulsed Nd;YAG laser and the topical application of fluoride. Of the permanent mandibular anterior hovine teeth, healthy, carious free ones were used. Three hundred specimens were made. Specimens within 25~45 Vickers hardness numbers were assigned to 20 control and experimental stoops ; each containing 15 specimens. After forming artificial carious lesions, 10 J/$\textrm{cm}^2$, 20 J/$\textrm{cm}^2$, and 30 J/$\textrm{cm}^2$ energies were irradiated on the enamel surface of each experimental group. Also NaF, NH4F, Elmex gel(amine fluoride) and APF gel fluoride compounds were applied topically. Next, all the specimens were placed into the pH circulatory procedures for eight days. Vickers hardness numbers were measured using a microhardness tester. Surface changes of the enamel were observed using an scanning electron microscope. The comparative ana1ysis yielded the following results : 1. The reduction of surface hardness of the enamel surface was less in all groups with fluoride application than in the group without fluoride application. 2. The APF gel croup with 10 J/$\textrm{cm}^2$ irradiation showed the lowest reduction of surface hardness. 3. The reduction of surface hardness of the enamel surface in the group of laser irradiation without fluoride application not showed any significant difference according to the energy density of the laser. 4. Under the scanning electron microscope, in enamel irradiated with 10J/$\textrm{cm}^2$ showed appearance similar to acid etching surface. In enamel irradiated with 20 J/$\textrm{cm}^2$, line enamel crack was detected. In enamel irradiated with 30j/$\textrm{cm}^2$, severe enamel crack and fusion of enamel were detected. These results suggest that one could obtain the best anticariogenic effects without damage to teeth in the group of application of APF gel after laser irradiation with 10 J/$\textrm{cm}^2$.

• Fisheries and Aquatic Sciences
• /
• v.15 no.3
• /
• pp.203-207
• /
• 2012

The amount of fluoride removed from Antarctic krill via organic acid extraction depends on the extraction time, concentration, extraction volume, and the nature of the acid itself. The fluoride content in Euphausia superba was determined by measuring the concentration of fluoride ion in acidic extracts using an ion-selective electrode. The best results were obtained by adding 50 mL of 0.01 M citric acid to 0.3-0.5 g of krill and extracting for 5 min. Under these conditions, recoveries of fluoride from frozen whole krill and krill meat were 95.6-99.5% and 97.5-101.3%, respectively. The dry basis fluoride contents of krill by-product, krill meat and the boiled krill were 705, 298, and 575 ppm, respectively. These levels were significantly reduced by citric acid extraction.

• Restorative Dentistry and Endodontics
• /
• v.16 no.1
• /
• pp.216-225
• /
• 1991

The purpose of this study was to evaluate the desensitizing effect of potassium oxalate(Group I), sodium fluoride (Group II), and control group (Group III). The 120 teeth of 26 patients who had been complained dentinal hypersensitivity were divided into three groups by applicating agent. The observation was done before and immediately after treatment. The data were statistically analyzed and the results were as followed. 1. Potassium oxalate showed the best desensitizing effect to the stimuli, followed by sodium fluoride, control group, and there was a significant difference (p<0.05) in desensitizing effect among the groups. 2. Potassium oxalate showed the best desensitizing effect to the stimuli, followed by sodium fluride, control group on both cervical abrasion and gingival recession, and there was a significant difference (p<0.05) in desensitizing effect among the groups on both cervical abrasion and gingival recession. 3. There was no significant difference (p<0.05) in effect of the desensitization between cervical abrasion and gingival recession. 4. The scratch and air blast I were more effective in desensitiziation than other stimuli with significant difference (p<0.05). In view of the results mentioned above, it can be conceived that potassium oxalate is more effective than sodium fluoride on the reduction of dentinal hypersensitivity.

• Restorative Dentistry and Endodontics
• /
• v.22 no.2
• /
• pp.575-595
• /
• 1997

Replacement resorption is followed by the delayed replantation of an avulsed tooth. Currently no effective treatment is substantiated for replacement resorption. The purpose of this study was to investigate the effect of stannous fluoride, bisphosphonate (etidronate disodium) and gallium nitrate, which have been shown to reduce dentin resorption, on human dentin. Osteoclasts were collected from tibeas of chick embryo. The cells were well agitated to prevent adhesion and seeded onto the sliced human dentin wafers which had been soaked in either culture media (control), or several different concentrations of stannous fluoride, etidronate disodium (l-hydroxyethylidene -1,1-bisphosphonate disodium), and gallium nitrate. Resorption was measured by counting the number of resorptive pit produced by the cells. Results are as follows. Stannous fluoride and etidronate disodium showed statistically significant reduction of dentin resorption(p<0.05) but the effect of stannous fluoride seemed to be its high cytotoxicity. Etidronate disodium did not show cytotoxicities in all experimented concentrations. Gallium nitrate did not show differences in resorption either between different concentrations or from the control group.

• Environmental Analysis Health and Toxicology
• /
• v.13 no.1_2
• /
• pp.19-26
• /
• 1998

In Korea, fluoride was first introduced into the drinking water of residents of Jinhae, KyungNam in 1981 for the prevention of dental caries. Ever since, growing numbers of communities favor fluoridation. The mechanism of F prevention of tooth decay is well known: fluoride ions substitute for hydroxyl ions in hydroxyapatite of hard tissues, which result in crystal perfection, with consequent reduction in dental caries. Soluble fluorides such as sodium fluoride are almost completely absorbed from the gastrointestinal tract. However, the presence of divalent or trivalent cations such as aluminum, magnesium, and calcium that can complex with F can reduce the degree of absorption. In U.S.A., over 7000 communities are now adding F to their drinking water. However, some portion of population oppose fluoridation, voicing both concern about the safety of fluoridation as well as for personal choice. Thus, This paper reviews the interaction of fluoride and cations as well as fluoride and suggests possible problems associated with fluoridation, a controversial issue.

• Journal of Korean Academy of Oral Health
• /
• v.42 no.4
• /
• pp.118-123
• /
• 2018

Objective: This study aimed to investigate the effects of fluoride-containing acidic tea beverages on bovine teeth surfaces. Methods: The pH values and fluoride concentrations of 11 kinds of mineral water and 23 kinds of tea were measured. The fluoride-containing Seopyenje black tea beverages with pH 3.48 were chosen for the experimental group. Distilled water that did not contain fluoride and had the same pH value as that of the Seopyenje black teas served as the positive control. The Jeju Samdasoo mineral waters with neural pH (pH 7.52) and no fluoride were chosen as the negative control. Bovine teeth in each group were submerged for 10 minutes. Thereafter, surface microhardness of each bovine teeth was measured and the results were analyzed. Results: The pH value range was 6.94-8.09 ($mean=7.37{\pm}0.08$) for the 11 kinds of mineral water and 3.48-6.74 ($5.62{\pm}0.05$) for the 23 tea beverages. Titratable acidity of the Seopyenje black tea beverages was higher than that of the distilled water mixed with citric acid, and the pH was 5.5 and 7.0, respectively. The fluoride content of the 11 kinds of mineral water was 0-1.09 ppm ($mean=0.44{\pm}0.02ppm$) that of the 23 tea beverages was and 0-0.74 ppm ($0.64{\pm}0.06ppm$). In terms of enamel microhardness reduction of the bovine teeth, the tea beverages had the largest effects. There was no significant difference in microhardness reduction between the tea beverages and distilled water mixed with citric acid (P>0.05). Conversely, a significant difference was found between the kinds of mineral water and tea beverages, and also between mineral water and distilled water mixed with citric acid (P<0.05). Conclusions: Acidic tea beverages appeared to erode the surfaces of bovine teeth. The amount of fluoride in the tea beverages was not enough to inhibit erosion. Therefore, frequent intakes of acidic tea beverage are likely to increase erosion on the surfaces of bovine teeth, by affecting the enamel microhardness of teeth.