• 대한화학회지
• /
• 제8권4호
• /
• pp.135-141
• /
• 1964

아밀아이오다이드를 디메칠홀움아마이드 存在下에서 弗化加里와 低溫反應시켜 본 結果 弗化物과 데칸을 生成하였음. ${\alpha}$, ${\beta}$-디크로로-${\beta}$-페닐-푸로피온酸과 같은 多鹽素化物은 ${\alpha}$-크로로스타이렌, 弗化스타이렌 及 弗化酸을 生成하였음. 이 酸의 에칠에스텔은 弗化物을 生成하지 않고 各種 쌍合物의 混合物을 얻었음. 디부롬스타이렌은 부롬스타이렌과 弗化物을 生成하고 沃度를 含有한 有機酸, 메-타요드벤젠익酸은 有機酸의 鹽과 微量의 쌍合物을 生成하였음. 메타요드토류엔 及 1-아미노-4-요-드-2-메칠벤젠과 같은 沃化物은 弗化物은 弗化加里에 對하여 反應을 나타내지 않었음. 本報에는 各 反應條件과 弗化反應, 脫炭酸反應 及 쌍合反應에 關하여 論義하였음.

• Journal of Oral Medicine and Pain
• /
• 제21권2호
• /
• pp.207-224
• /
• 1996

This study was designed to determine the most effective concentration of fluoride and energy density of laser irradiation for the anticarious effect. For this study surface hardness in enamel was measured before and after irradiation with pulsed Nd;YAG laser and the topical application of fluoride. Of the permanent mandibular anterior hovine teeth, healthy, carious free ones were used. Three hundred specimens were made. Specimens within 25~45 Vickers hardness numbers were assigned to 20 control and experimental stoops ; each containing 15 specimens. After forming artificial carious lesions, 10 J/$\textrm{cm}^2$, 20 J/$\textrm{cm}^2$, and 30 J/$\textrm{cm}^2$ energies were irradiated on the enamel surface of each experimental group. Also NaF, NH4F, Elmex gel(amine fluoride) and APF gel fluoride compounds were applied topically. Next, all the specimens were placed into the pH circulatory procedures for eight days. Vickers hardness numbers were measured using a microhardness tester. Surface changes of the enamel were observed using an scanning electron microscope. The comparative ana1ysis yielded the following results : 1. The reduction of surface hardness of the enamel surface was less in all groups with fluoride application than in the group without fluoride application. 2. The APF gel croup with 10 J/$\textrm{cm}^2$ irradiation showed the lowest reduction of surface hardness. 3. The reduction of surface hardness of the enamel surface in the group of laser irradiation without fluoride application not showed any significant difference according to the energy density of the laser. 4. Under the scanning electron microscope, in enamel irradiated with 10J/$\textrm{cm}^2$ showed appearance similar to acid etching surface. In enamel irradiated with 20 J/$\textrm{cm}^2$, line enamel crack was detected. In enamel irradiated with 30j/$\textrm{cm}^2$, severe enamel crack and fusion of enamel were detected. These results suggest that one could obtain the best anticariogenic effects without damage to teeth in the group of application of APF gel after laser irradiation with 10 J/$\textrm{cm}^2$.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1993년도 추계 학술발표 강연 및 논문 개요집
• /
• pp.69-71
• /
• 1993

Fluoride compound potentiometric cell oxygen sensors were fabricated for the measurement of oxygen pressure in the low temperature range (300。K-500。K). The disk type sensors consist of a reference Air(0$_2$):Ag, a solid electrolyte SrF$_2$, and a sensing metel Ag electrode. And the buried reference electrode type sensor have a NiO/Ni reference electrode. The open circuit emf of the cell showed high sensivity to oxygen gas (60mv) at the measuring temperature 20$0^{\circ}C$. Also, The buried reference electrode type sensor showed 30mv from 1% to 10% oxygen pressure range.

• 대한핵의학회지
• /
• 제28권3호
• /
• pp.331-337
• /
• 1994

In order to develop a $^{18}F$-labelled myocardial perfusion agent(flow tracer) for PET, $^{18}F$-labelled organic ammonium cations were synthesized and evaluated in relation to their biodistribution. Five quaternary organic ammonium compounds were labelled with $^{18}F$ in a side chain with moderate to good yields by direct introduction of $^{18}F$-fluoride. Radiochemical yields have been achieved in 30-40min by the precursors (tosylates) in dimethylsulfoxide 15-60% (decay corrected). The reaction was found to be autocatalyzed. A remote controlled procedure was developed in these synthesis. $^{18}F$-Labelling and HPLC-purification of com-pounds needed about 60 min(Yield; 7-20%). Up to now the two compounds N-4-[$^{18}F$]fluorobutyl-pyridinium cation(1) and N, N dibenzyl-4(2-[$^{18}F$]fluoroethyl)piperidinium cation(2) were investigated in relation to their biodistribution in mice. Compound 1 showed at 1 min post injection the high uptake of 19.22% ID/g organ in the myocardium but a following fast decline to 1.12% ID/g organ after 40min. Uptake of compound 2 was after 1min in the heart 5.90% ID/g organ but after 40min at the relative high value of 4.33% ID/g organ. Heart:blood ratio for compound(1) at 1 min was 8.3, at 40 min 2.6 for compound II 2.0(1min) and 15.0(40 min). As data of compound 2 showed greater heart uptake, slower myocardial release, and higher heart: blood ratios, compound 2 is a good candidate for further evaluation.

• Nuclear Engineering and Technology
• /
• 제49권8호
• /
• pp.1711-1716
• /
• 2017

Uranium tetrafluoride ($UF_4$) is the most used nuclear material for producing metallic uranium by reduction with Ca or Mg. Metallic uranium is a raw material for the manufacture of uranium silicide, $U_3Si_2$, which is the most suitable uranium compound for use as nuclear fuel for research reactors. By contrast, ammonium uranyl carbonate is a traditional uranium compound used for manufacturing uranium dioxide $UO_2$ fuel for nuclear power reactors or $U_3O_8-Al$ dispersion fuel for nuclear research reactors. This work describes a procedure for recovering uranium and ammonium fluoride ($NH_4F$) from a liquid residue generated during the production routine of ammonium uranyl carbonate, ending with $UF_4$ as a final product. The residue, consisting of a solution containing high concentrations of ammonium ($NH_4^+$), fluoride ($F^-$), and carbonate ($CO_3^{2-}$), has significant concentrations of uranium as $UO_2^{2+}$. From this residue, the proposed procedure consists of precipitating ammonium peroxide fluorouranate (APOFU) and $NH_4F$, while recovering the major part of uranium. Further, the remaining solution is concentrated by heating, and ammonium bifluoride ($NH_4HF_2$) is precipitated. As a final step, $NH_4HF_2$ is added to $UO_2$, inducing fluoridation and decomposition, resulting in $UF_4$ with adequate properties for metallic uranium manufacture.

• 공업화학
• /
• 제17권5호
• /
• pp.483-489
• /
• 2006

희토류 화합물인 $La_{2}O_{3}$ 및 $CeO_{2}$ 시약과 이들을 함유하는 희토류 광석을 이용하여 제철 폐수 중의 불소 및 유해 중금속 제거에 대하여 연구하였다. 용액 중 불소에 대한 희토류 원소의 제거 반응기구는 $La^{3+}$ 및 $Ce^{4+}$ 등의 양이온이 불소 이온과 불용성 화합물을 형성하는 것으로 알려져 있다. 기존의 불소 제거에 사용되고 있는 소석회와 비교한 결과 $La_{2}O_{3}$ 및 $CeO_{2}$ 의 불소제거 효율이 높았다. HF 용액에서의 제거 효율은 $CeO_{2}$ 광석 < $CeO_{2}$ 시약 < $Ca(OH)_{2}$ < $La_{2}O_{3}$ 광석 < $La_{2}O_{3}$ 시약의 순서였고, 제철 폐수에서는 $Ca(OH)_{2}$ < $CeO_{2}$ 광석 < $CeO_{2}$ 시약 < $La_{2}O_{3}$ 광석 < $La_{2}O_{3}$ 시약의 순서였다(pH의 영향은 소석회인 경우 pH가 증가할수록 불소제거율이 감소하였다. 세륨화합물과 란탄화합물인 경우는 pH 증가에도 불구하고 불소제거 효율이 증가하는 경향을 보였으나 방류 시 수질조건과 불소제거율을 함께 고려할 때 용액의 적정 pH는 7이 적당하다고 판단된다). 망간제거의 경우, pH 7 이하에서는 소석회가 희토류 화합물보다 우수한 망간제거율을 보였고 pH 10에서는 모든 처리제에 대해서 거의 완벽한 제거특성을 보였다. 총크롬 제거의 경우는 산성 조건에서는 란탄화합물이 가장 높은 불소 제거율을 보였으며 pH 7이상에서는 모든 처리제가 좋은 효율을 보였다.

• Bulletin of the Korean Chemical Society
• /
• 제29권8호
• /
• pp.1464-1466
• /
• 2008

Tetrabutylammonium Fluorodichloroplumbate(II), N$(C_4H_9)_4$[$PbCl_2F$], TBAFDiCP and Tetrabutylammonium Fluorodiiodoplumbate(II), [$(C_4H_9)_4$N][$PbI_2F$], TBAFDiIP are the first examples of fluoroplumbate salts that have been prepared from the reaction of $(C_4H_9)_4$NF with $PbCl_2$ and $PbI_2$ respectively using either $CH_3CN$ solvent. These new compound characterized by elemental analysis, IR, UV/Visible, $^1H$ NMR, and $^{19}F$ NMR techniques.

• 마이크로전자및패키징학회지
• /
• 제8권3호
• /
• pp.63-67
• /
• 2001

최근가지 Pt박막의 식각은 Cl 계열의 가스에 의한 물리적인 스퍼터링 기구에 초점을 맞추어 연구가 진행되어왔으며 F 계열의 가스에 의한 식각 특성은 상당히 미진하였다. 본 연구에서는 ECR(electron cyclotron resonance) 플라즈마 식각 장비를 이용하여 $Cl_2$/Ar 가스와 $SF_{6}$/Ar 가스를 사용하여 Pt 박막의 식각 특성을 연구하였고, $SF_{6}$/Ar 가스의 경우 Pt 박막과 반응하여 휘발성의 식각 부산물을 형성시킬 수 있음을 확인하였다. 그리고 휘발성있는 platinum fluoride 화합물의 형성에 의해 식각률, 식각 측면형상과 표면 거칠기 특성개선도 얻을 수 있었다.

• Biomolecules & Therapeutics
• /
• 제26권4호
• /
• pp.374-379
• /
• 2018

In this study, we investigated the effects of pelargonidin, an anthocyanidin found in many fruits and vegetables, on endothelium-independent vascular contractility to determine the underlying mechanism of relaxation. Isometric contractions of denuded aortic muscles from male rats were recorded, and the data were combined with those obtained in western blot analysis. Pelargonidin significantly inhibited fluoride-, thromboxane A2-, and phorbol ester-induced vascular contractions, regardless of the presence or absence of endothelium, suggesting a direct effect of the compound on vascular smooth muscles via a different pathway. Pelargonidin significantly inhibited the fluoride-dependent increase in the level of myosin phosphatase target subunit 1 (MYPT1) phosphorylation at Thr-855 and the phorbol 12,13-dibutyrate-dependent increase in the level of extracellular signal-regulated kinase (ERK) 1/2 phosphorylation at Thr202/Tyr204, suggesting the inhibition of Rho-kinase and mitogen-activated protein kinase kinase (MEK) activities and subsequent phosphorylation of MYPT1 and ERK1/2. These results suggest that the relaxation effect of pelargonidin on agonist-dependent vascular contractions includes inhibition of Rho-kinase and MEK activities, independent of the endothelial function.

• Archives of Pharmacal Research
• /
• 제22권6호
• /
• pp.575-578
• /
• 1999

Derivatives of elema-1,3-diene were synthesized in several steps as polar analogs of $\beta$-elemene, antitumor agent under clinical phase. The lactone ring of compound 1 was opened by LiAlH4 to give diol 2 which was selectively protected by TBDPSCI. After acetylation of the secondary alcohol, the acetylated product was ozonolyzed and reduced to give elemene derivative 4 which was converted to diolefin 8 via selenides subsequent deprotection by tetrabutylammonium fluoride gave two compounds 9, 10.