• Korean Journal of Optics and Photonics
• /
• v.10 no.1
• /
• pp.1-4
• /
• 1999

A confocal microscope system was used to study the bursts of fluorescence photons from single dye molecules excited at 638 nm by a short-pulsed diode laser with a repetition rate of 17 MHz. A red dye, JA22, in ethylene glycol solution was used as a sample. The fluorescence decay curves of single molecules were acquired using a time-correlated single photon counting and analyzed by a maximum likelihood estimator. It was possible to measure the fluorescence decay times with an error probability of 21% at photon number of more than 40 per dye molecule.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.2
• /
• pp.50-58
• /
• 2001

The purpose of this research is to obtain the information of the development process of a vaporizing GDI spray using exciplex fluorecence method. Fluorobenzene/DEMA system was used as the exciplex-forming dopants. The 2-D spray images of liquid and vapor phases were acquired, and the behavior of both phases was analyzed by the image processing. The experiment was performed at the three different ambient perssures and the ambient temperature of 273K and 473K. As the result of this work, it was found that the development characteristics of GDI spray have stronger effect on the ambient pressure than on the ambient temperature. With an increase of ambient pressure, the distribution of vapor phase was decreased and the concentration of that was denser. Two regions, namely cone and mixing regions could be identified from those resulrs.

• Bulletin of the Korean Chemical Society
• /
• v.13 no.6
• /
• pp.613-620
• /
• 1992

The solvent-dependent photophysical properties of 2-biphenylcarboxylic acid (2BPCA) and 4-biphenylcarboxylic acid(4BPCA), which have a pre-twisted conformation in the ground state, have been investigated. The fluorescence spectra of 4BPCA show vibrational structure with a non-mirror image to the absorption spectra in nonpolar solvent while those of 2BPCA show no structure even in nonpolar solvents. As the solvent polarity increases, the fluorescence spectra become diffuse and broad with a strong red shift resulting in the large Stokes shift. The large fluorescence Stokes shift of BPCA's in polar solvent is also partially due to an intramolecular charge transfer (ICT) interaction in the excited state, as demonstrated by the large dipole moment in the excited state (7.6-10.6 D). The fluorescence decay behaviors of BPCA's (decay-times and their pre-exponential factors) also depend on solvent polarity in agreement with the solvent-dependent properties of the steady-state fluorecence. The data have been discussed in terms of change in the excited-state potential energy surface with respect to change of the dihedral angle of biphenyl moiety.

• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.1
• /
• pp.16-24
• /
• 2005

Mathematical model was developed to verify a sequential particle removal taking place in a granular media gravity filter. Consequential multi-layer filtration cycle model was applied to verify the fraction of filter effluent particles that are filter influent particles that were never removed as well as the fraction of filter effluent particles that were detached after deposition were performed through laboratory experiments. Three sizes of marker particles were injected ahead of the filter column as a pulse in the presence of four sizes of polystyrene particles that were used as a primary source of particles in the raw suspension to investigate particle attachment alone in contrast to net removal from attachment and detachment. Microscopic counting of filter effluent particles was assumed to reflect attachment. Experimental results indicated that particle detachment is significant beginning from the early phase of filtration. For each size of fluorescent microspheres at one filter depth, fluorescent microsphere removal increased with filter runtime to a maximum due to ripening. The detached fraction of effluent particles increased with particle size and filter depth. The presence of detached particles and the increasing fraction of detached particles in deeper bed were confirmed.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10b
• /
• pp.961-966
• /
• 2000

It is difficult to change or remedy concrete structure after hardened. It is usual to evaluate the quality of hardened concrete using several test method. This study was performed to make fundamental data that could be used to evaluate the quality of hardened concrete. This study is to estimate mix proportion of hardened concrete. Each elements of concrete needed different estimation methods. First, the cement that handled by the most important compounds measured by XRF(X-ray fluorecence) machine with scanning Ca-K${\alpha}$. Second, the coarse aggregate that divided by maximum size measured by the area comparison method that starts from the assumption of uniform distribution. Third, the fine aggregate measured by the weight comparison method that needs several prerequsite constants which concerned cement hydration reaction. Fourth, the water content would be estimated by expert system that has data base of design data, the contents of above estimation results, the characteristics of concrete strength. As the result of the above research, some conclusions are as follows. The cement estimation method resulted by reliability of mean 96.7%, standard deviation 3.92. The area comparison method resulted by reliability of mean 95.3%, standard deviation 2.08. The weight comparison method resulted by reliability of mean 93.3%, standard deviation 3.35.

• Proceedings of the Korean Society of Embryo Transfer Conference
• /
• 1998.05a
• /
• pp.12-28
• /
• 1998

The technology of creating transgenic animals has a potential value in improving productivity and disease resistance of animals, gene therapy, drug pharming and production of model animals for certain diseases. Up to date, fairly low success rate of production of transgenic animals and a pronounced variability with respect to the expression of transgenes have been much observed. The mechanisms how to integrate the injected genes with a certain part of the genomes are unknown yet. Many techniques in gene transfer, beside microinjection, have been introduced and explored thus to improve the production efficiency of transgenic animals. In this article, the methods and efficiency of gene-transfer techniques, the detection and preselection of transgenes in embryos by PCR- and GFP-screenings and cloning of preselected transgenic embryos by nuclear transplantation are described and discussed. Some experimental results showed that the early screening and selection of integration of the injected gene with embryonic genome by polymerase chain reaction(PCR) and green fluorecence protein(GFP) were promising methods. Further, the application of nuclear transplantation technology to cloning and multiplication of the positively integrated genes in the cleaving embryos and embryonic cells will be beneficially used for the mass production of transgenic embryos and consequently improving the production efficiency in transgenic animals.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.25 no.3
• /
• pp.219-228
• /
• 1992

The steady state and decay characteristics of primary fluorescence of twelve clones of phytoplankton were investigated in vivo. At 380-435nm region, intense fluorescence emission spectra were obtained from the all phytoplankton, examined', The primary fluorescence of phytoplankton in different growth states was examined In order to find out fluorophores for the observed fluorescence, eight different pteridine derivatives in phosphate buffer solution were examined for their fluorescence characteristics and compared with those of phytoplankton. Fluorescence lifetimes $(\tau)$ and decay curves were compared with standard solution of candidate organic compounds. Decay kinetics of observed fluorescence were shown as hi- and tri-exponential decay curves with 430nm cut-off filter for phytoplankton. Comparison between fluorescence characteristics of bacteria and phytoplankton showed distinct differences for their steady state fluorecence spectra and decay kinetics.