• 한국해안해양공학회:학술대회논문집
• /
• 한국해안해양공학회 2006년도 추계학술대회 발표논문집 Proceedings of Coastal and Ocean Engineering in Korea
• /
• pp.57-60
• /
• 2006

• 한국유체기계학회 논문집
• /
• 제14권1호
• /
• pp.5-10
• /
• 2011

MTG(Micro turbine generator) operating at 400,000 rpm is under development and the impact test rig to measure the dynamic stiffness and damping coefficient of air foil bearing for high speed rotor is presented in this study. The stiffness and damping coefficient of air foil bearing depending on the rotational speed can be measured easily and effectively by using the simple configuration of impact test rig which is composed of air gun, gap sensors and high speed motor. The estimation results of stiffness and dampling coefficient using least square estimation method is presented as well.

• 한국해양공학회지
• /
• 제23권6호
• /
• pp.17-22
• /
• 2009

This study presents an investigation of the characteristics of piezoelectric sensors whose main utilization is to measure impact pressure. The piezoelectric sensors were tested from several points of view. Their characteristics were investigated for repeatability, the effect of the diameter, temperature effect, water purity, flush mounting, and AC and DC coupling. Out of these, it was revealed that the temperature effect is very significant. The characteristics of the AC and DC coupling are also very important in understanding the time history of the impact pressure.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2011년도 정기 학술대회
• /
• pp.553-556
• /
• 2011

The primary aim of the present study is to propose new design formulae that can be used to evaluate the structural performance of breakwaters installed on container carriers under green water impact loads. A series of numerical analyses for green water impact loads inducing breakwater collapse have been carried out. The well-known fluid-structure interaction analysis technique has been adopted realistically to consider the phenomenon of green water impact loads. The structural behavior of these breakwaters under green water impact loads has also been carried out simultaneously throughout the transient analysis. A verification study of the numerical results was performed using the actual collapse incidents of breakwaters on container carriers. It would be expected that the proposed design formulae, based on the obtained insights, could be used as practical guidelines for the design of breakwaters on container carriers.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.92-93
• /
• 2013

In this study, Shock Absorption performance of Magneto-rheological elastomer(MRE) is identified through the drop impact test. Magneto-rheological materials are divided into two groups by MR fluid in fluid state and MR elastomer in solid state like rubber. The stiffness characteristics of Magneto-rheological material can be changed as magnetic field is applied. The impact loads in MR elastomer were measured under weight of impactor. Experiment results are shown through the experiments to confirm the effect of shock absorption of MR elastomer. Thus, the MR elastomer can be applied to shock absorber used in area that shock occurs.

• 한국해양공학회지
• /
• 제31권3호
• /
• pp.219-226
• /
• 2017

In this study, the impact characteristics of subsea pipelines that were installed in various soil types and burial depths were evaluated by a numerical method. An impact scenario replicated a dropped ship anchor that fell vertically and impacted an installed subsea pipeline. In order to calculate the impact force through terminal velocity, FLUENT, a computational fluid dynamic program and MDM (Moving Deforming Mesh) technique were applied. Next, a dynamic finite element program, ANSYS Explicit Dynamics, was used for impact analysis between the anchor and pipeline (or, subsea if they were buried). Three soil types were considered: loose sand, dense sand and soft clay by applying the Mohr-coulomb model to the seabed. The buried depth was assumed to be 0 m, 1 m and 2 m. In conclusion, a subsea pipeline was the most stable when buried in dense sand at a depth of 2 m to prevent impact damage.

• Journal of Mechanical Science and Technology
• /
• 제18권12호
• /
• pp.2125-2136
• /
• 2004

In this paper, a numerical application algorithm for applying the CFAM (Consistent Fluid Added Mass) matrix for a core seismic analysis is developed and applied to the 7-ducts core system to investigate the fluid effects on the dynamic characteristics and the seismic time history responses. To this end, three cases such as the in-air condition, the in-water condition without the fluid coupling terms, and the in-water condition with the fluid coupling terms are considered in this paper. From modal analysis, the core duct assemblies revealed strongly coupled out-of-phase vibration modes unlike the other cases with the fluid coupling terms considered. From the results of the seismic time history analysis, it was also verified that the fluid coupling terms in the CFAM matrix can significantly affect the impact responses and the seismic displacement responses of the ducts.

• 한국항공우주학회지
• /
• 제44권2호
• /
• pp.108-115
• /
• 2016

본 논문에서는 유체를 포함하고 있는 원통형 용기에 고속의 충격체가 관통하는 경우에 대하여 ALE(Arbitrary Lagrangian Eulerian) 방법을 사용하여 유체-구조 연성해석을 수행하였다. 해석모델은 물이 채워진 원통형 폴리머 용기를 고려하였으며, 상용유한요소해석 프로그램 LS-DYNA를 사용하여 연구를 수행하였다. 고속의 충격체가 유체를 포함하고 있는 용기에 충격하여 관통하면서 발생한 수압램 현상에 대해 충격체의 거동 시간이력, 유체의 압력 및 밀도 변화를 통하여 발생하는 유체-구조 상호작용 현상을 분석하였다. 해석 결과는 실험 결과에서 얻은 결과와 비교하여 타당성을 검증하였다.

• International Journal of Fluid Machinery and Systems
• /
• 제9권1호
• /
• pp.39-46
• /
• 2016

A high frequency hydraulic rock drill drifter with sleeve valve is developed to use on arm of excavator. In order to ensure optimal working parameters of impact system for the new hydraulic rock drill drifter controlled by sleeve valve, the performance test system is built using the arm and the hydraulic source of excavator. The evaluation indexes are gained through measurement of working pressure, supply oil flow and stress wave. The relations of working parameters to impact system performance are analyzed. The result demonstrates that the maximum impact energy of the drill drifter is 98.34J with impact frequency of 71HZ. Optimal pressure of YZ45 rock drill is 12.8 MPa-13.6MPa, in which the energy efficiency reaches above 58.6%, and feature moment of energy distribution is more than 0.650.

• 한국산학기술학회논문지
• /
• 제19권3호
• /
• pp.8-13
• /
• 2018

외부 충격에 대한 연료탱크의 구조 건전성을 확인하기 위해서는 연료탱크 내부 연료의 거동과 그에 따른 영향성을 파악할 수 있는 유체-구조 연성해석을 수행해야 한다. 과거에는 유체-구조 연성해석을 수행하기 위해서는 상당한 전산자원과 과도한 계산시간이 필요하여 수치해석 결과를 도출하기까지 많은 제약이 있었다. 하지만, 최근 컴퓨터 성능이 획기적으로 향상되어 유체-구조 연성해석 등의 복잡한 수치해석이 가능하게 되었다. 유체-구조 연성해석을 위해 주로 사용되는 방법은 ALE(Arbitrary Lagrangian and Eulerian)와 입자법(Smoothed Particle Hydrodynamic)이 있다. 두 방법에는 상호 장단점이 있기 때문에 수치해석의 목적에 따라 적합한 방법을 적용하는 것이 필요하다. 본 연구에서는 ALE을 적용하여 연료탱크 충돌충격 시험 수치모사를 수행하였다. 수치해석 목적은 충돌충격하중에 의해 컨테이너 내부에 장착된 연료탱크의 파손 가능성을 확인하는 것인데, 수치해석의 결과로 연료탱크 내부의 유체 거동을 파악하고, 충격하중에 의해 연료탱크와 컨테이너 구조물에서 발생하는 응력을 계산하여 연료탱크 파손 여부에 따른 내부 유체의 누설 가능성을 제고하였다.