• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.585-588
• /
• 2007

This study attempts to analyze estimating process and the level of information performing literature review and questionnaire and identify phased influence factors on construction cost using phased information of project and suggests framework of approximate estimation model at the planning and design stage. This paper suggests phased influence factors on construction cost and framework of approximate estimation model for integrated project cost management.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.5
• /
• pp.303-308
• /
• 1999

Dielectric thin films of PLT(28) ($(Pb_{0.72}La_{0.28})Ti_{0.93}O_3$) have been deposited on $Pt/Ti/SiO_2/Si$ substrates in situ by a laser ablation. We have systematically changed the laser fluence from 0.4 J/$cm^2$ to 3 J/$cm^2$, and deposition temperature from $450^{\circ}C\; to\; 700^{\circ}C$. The surface morphology was changed from planar grain structure to columnar structure as the nucleation energy was increased. The PLT thin film with columnar structure showed good dielectric properties. The deposition temperature influenced on nucleation energy much stronger than the laser energy density did.

• Transactions on Electrical and Electronic Materials
• /
• v.1 no.4
• /
• pp.20-24
• /
• 2000

This study aimed to develop ITO(Indium Tim Oxide) tin films ablation with a pulsed type KrF excimer laser required for the electrode patterning application in flat panel display into small geometry on a large substrate are. The threshold fluence for ablating ITO on glass substrate is about 0.1 J/㎠. And its value is much smaller than that using 3 .sup rd/ harmonic Nd:YAG laser. Through the optical microscope measurement the surface color of the ablated ITO is changed into dark brown due to increase of surface roughness and transformation of chemical composition by the laser light. The laser-irradiated regions were all found to be electrically isolating from the original surroundings. The XPS analysis showed that the relative surface concentration of Sn and In was essentially unchanged (In:Sn=5:1)after irradiating the KrF excimer laser. Using Al foil made by 2$\^$nd/ harmonic Na:YAG laser, the various ITO patterning is carried out.

• Korean Institute of Interior Design Journal
• /
• no.5
• /
• pp.53-58
• /
• 1995

The purpose of this study is to explore how people's evaluation and preference on color palettes differ based on their cultural background. This study used the same color palettes developed by Youngsoon Park and Denise Guerin(1992). Fourteen representative adjectives are used to analyze the meaning evaluation and preference on the six color palletes. 425 undergraduate students are se-lected from Korea, Japan, U.S. and England and ques-tionnaire was used as survey instrument. The results show that there are significant differences among the four countries in the meaning evaluation and preferences on the color palettes and the characteristics of color palettes influence the differences among the countries. The differences among the countries decrease in case of color palettes composed of warm color with low or medium value difference and chroma difference, while the differences increase in case of color palette characterized by strong color contrast with high or medi-um value difference and chroma difference. The result of color meaning evaluation can be catego-rized into Western and Eastern culture. Korea and U.S., and Japan and U.S. showed significant differences in the most words and Korea and Japan showed similarities in the most words. Therefore it can be concluded that cul-tural backgrounds related to race, region and history in-fluence the color meaning evaluation and preference. Fur-ther study should explore the relationship between color and culture using more various color instruments such as color palettes in order to categorize the various aspects of culture.

• Nuclear Engineering and Technology
• /
• v.48 no.2
• /
• pp.545-553
• /
• 2016

The failure probabilities of the reactor pressure vessel (RPV) for low temperature over-pressurization (LTOP) and cool-down transients are calculated in this study. For the cool-down transient, a pressure-temperature limit curve is generated in accordance with Section XI, Appendix G of the American Society of Mechanical Engineers (ASME) code, from which safety margin factors are deliberately removed for the probabilistic fracture mechanics analysis. Then, sensitivity analyses are conducted to understand the effects of some input parameters. For the LTOP transient, the failure of the RPV mostly occurs during the period of the abrupt pressure rise. For the cool-down transient, the decrease of the fracture toughness with temperature and time plays a main role in RPV failure at the end of the cool-down process. As expected, the failure probability increases with increasing fluence, Cu and Ni contents, and initial reference temperature-nil ductility transition ($RT_{NDT}$). The effect of warm prestressing on the vessel failure probability for LTOP is not significant because most of the failures happen before the stress intensity factor reaches the peak value while its effect reduces the failure probability by more than one order of magnitude for the cool-down transient.

• Nuclear Engineering and Technology
• /
• v.52 no.1
• /
• pp.185-191
• /
• 2020

Plant-specific analyses of an advanced reactor have been performed to assure the structural integrity of the reactor pressure vessel during transient conditions, which are expected to initiate pressurized thermal shock (PTS) events. The vessel failure probabilities from the probabilistic fracture mechanics analyses are combined with the transient frequencies to generate the through-wall cracking frequencies, which are compared to the acceptance criterion. Several sensitivity analyses are performed, focusing on the orientations and sizes of cracks, the copper content, and a flaw distribution model. The results show that the integrity of the reactor vessel is expected to be maintained for long-term operation beyond the design lifetime from the PTS perspective using the design data of the advanced reactor. Moreover, a fluence level exceeding 9×10¹⁹ n/㎠ is found to be acceptable, generating a sufficient margin beyond the design lifetime.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.386-386
• /
• 2010

최근 널리 보급되고 있는 치과용 임플란트는 티타늄(Ti) 또는 티타늄 합금(Ti-6Al-4V) 보철과 크라운을 연결하여 사용하고 있다. 티타늄은 생체 친화성이 우수하나, 생체 활성도가 없어 치유기간이 긴 단점이 있다. 이를 보완하기 위해 인체 경조직과 유사한 수산화아파타이트(hydroxyapatite, $Ca_{10}(PO_4)_6(OH)_2)$를 티타늄 임플란트 표면에 코팅하는 방법이 연구되고 있으나 수산화아파타이트 코팅은 티타늄과의 접착성이 나쁘기 때문에 시술 및 사용과정에서 코팅층이 임플란트로부터 박리되는 문제점이 있다. 본 연구에서는 티타늄과 수산화아파타이트 사이에서 접착력을 향상시키는 buffer layer로서 지르코니아(8YSZ, 8mol% Yttria-stabilized zirconia)를 연구하였다. 지르코니아는 고온에서 안정하며, 티타늄 합금과 수산화아파타이트 사이의 반응을 방지하며, 박막밀도와 기계적 강도가 좋은 생체세라믹스이다. 지르코니아 박막을 펄스 레이저 증착법을 이용하여 증착 온도 $600^{\circ}C$, 레이저 fluence $2\;J/cm^2$에서 산소($O_2$) 분압을 바꿔 가며 증착하였다. 그 위에 수산화아파타이트 박막을 역시 펄스 레이저 증착법으로 증착하였다. Scratch test와 Pull-off test를 통해 접착력을 평가한 결과 지르코니아 buffer layer 삽입에 의해 티타늄 합금과 수산화아파타이트 사이의 접착력이 향상되었음을 확인하였다. 또한 산소분압이 박막의 특성 및 접착력에 미치는 영향을 고찰하였다.

• Journal of Photoscience
• /
• v.11 no.3
• /
• pp.89-94
• /
• 2004

Motile cyanobacterium Synechocystis sp. PCC 6803 cells show photomovement with respect to the light stimulus. Under lateral irradiation, Synechocystis displays a phototactic gliding movement toward the light source by a twodimensional random biased walk. Under vertical irradiation, Synechocystis decreased the frequency of mean vectorial gliding speed dependent on the applied fluence rate, whereas the deviation distribution width of the speed increased. This strongly suggests the involvement of photokinesis. Evidence for the cyanobacterial photokinesis was discussed in the previous report (Choi et al., 1999. Photochem. Photobiol. 70, 95-102) demonstrating that the gross scalar speed of vertically irradiating cells increased by about 50% compared with that of dark-adapted cells. In the visible wavelength range, Synechocystis cells showed a maximal photokinetic activity at 420 nm and a second maximal activity at 680 nm. The threshold action spectrum for the photokinesis resembles the absorption spectrum of chlorophyll with major differences in the phototaxis action spectrum at 560 nm and 660 nm. We postulate that the cyanobacterial photokinesis is powered by the energy-generating chlorophyll pigments.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.7
• /
• pp.799-804
• /
• 2012

Recently micro-nano structures has widely been reported to improve the performance of waterproof, heat isolation, sound and light absorption in various fields of electric devices such as mobiles, battery, display and solar panels. A lot of micro-sized holes on the surface of thin film provide excellent sound, or heat, or light transmission efficiency more than solid film and simultaneously nano-sized protrusions around micro hole increase the hydrophobicity of the surface of thin film because of lotus leaf effects as generally known previously. In this paper new rapid fabrication process with 355 nm UV laser ablation was proposed to get micro-nano structures on the surface of thin film, which have only been observed at higher laser fluence. Developed thin micro-nano structured film was also investigated the hydrophobic property by measuring the contact angle and demonstrated the possibility to apply to water droplet separation.

• Laser Solutions
• /
• v.18 no.1
• /
• pp.12-17
• /
• 2015

This work performed numerical analysis of electromagnetic field and thermal phenomena occurring in femtosecond laser irradiation of silver nanowires. The local electric field enhancement was computed to calculate the optical energy dissipation as a Joule heating source and the thermal transport was analysed based on the two-temperature model (TTM). Electron temperature increased up to 1000K after 50fs and its spatial distribution became homogeneous after 80fs at the fluence of 100mJ/cm2. The result of this work is expected to contribute to revealing the photothermal effects on silver nanowires induced by femtosecond laser irradiation. Although the highest increase of lattice temperature was substantially below the melting point of silver, the experimental results showed resolidification and fragmentation of the silver nanowire into nanoparticles, which cannot be explained by the photothermal mechanism. Further studies are thus needed to clarify the physical mechanisms.