• 제목/요약/키워드: fluctuations

검색결과 2,220건 처리시간 0.03초

Model Cut-edge Formed on Zinc Coated Steels by Laser Machining and Its Corrosion Behavior

  • Sakairi, Masatoshi;Kageyama, Akihiro;Kikuhchi, Tatsuya
    • Corrosion Science and Technology
    • /
    • 제9권1호
    • /
    • pp.29-33
    • /
    • 2010
  • Laser machining technique, which is used focusing pulse YAG laser beam irradiation was applied to form area ratio controlled model cut-edge on pre painted Zn coated steels. A corrosion behavior of formed model cut-edge was investigated by rest potential measurement in 1 mol $m^{-3}$ NaCl with and without 0.5 kmol $m^{-3}$ $H_3BO_4$/0.05kmol$m^{-3}$ $Na_2B_4O_7$. The rest potential showed almost constant value with fluctuations. The amplitude of fluctuations increased with exposed area of steel surface. White corrosion products of zinc oxide and simonkollite was formed after the experiments at the formed model cut-edge.

INFLUENCE OF CONVECTION ON LINE ASYMMETRIES

  • Park, Yong-Sun;Yun, Hong-Sik
    • 천문학회지
    • /
    • 제19권1호
    • /
    • pp.15-31
    • /
    • 1986
  • We have analyzed Gray's observed mean line bisectors of FS, G0, G2, and G5 normal dwarf stars and interpreted them by computing theoretical line bisectors based on a two stream model. A set of perturbed models has been derived, and their detailed structures on temperature fluctuations and velocity fields are presented as a function of depth, which account for the observed bisectors. From the present study, it is found that the degree of stellar convective overshootings and temperature fluctuations in the upper atmospheres increases towards earlier spectral types. The convection cell size inferred from these models is found to increase also with the advancing earlier type. We demonstrated the usefulness of line bisector analysis as a diagnostic probe for stellar convection.

  • PDF

Numerical modeling of seawater flow through the flooding system of dry ocks

  • Najafi-Jilani, A.;Naghavi, A.
    • International Journal of Naval Architecture and Ocean Engineering
    • /
    • 제1권2호
    • /
    • pp.57-63
    • /
    • 2009
  • Numerical simulations have been carried out on the flooding system of a dry located at the south coasts of Iran. The main goals of seawater flow haracteristics in the intake channels conditions of the flooding system are imposed in the modeling. The upstream boundary condition is the tidal fluctuations of sea water level. At the downstream, the gradually rising water surface elevation in the dry described in a transient boundary condition. The numerical results are compared with available laboratory a good agreement is obtained. The seawater discharge through the flooding system and the required time to filling up the dry dock is determined at the worst case. The water current velocity and pressure on the rigid boundaries are discussed.

VLBI Astrometry with Source Frequency Phase Referencing in KVN

  • 정태현;;;손봉원
    • 천문학회보
    • /
    • 제36권1호
    • /
    • pp.69.1-69.1
    • /
    • 2011
  • The multi-band receiving feed which is one of the unique characteristics of the Korean VLBI Network (KVN) system compare to the other VLBI network enables to study precise astrometry with a source frequency phase referencing (SFPR) techniques. SFPR almost perfectly compensates the dominant non-dispersive tropospheric fluctuations by observing sources with multi-frequency simultaneously, and it also corrects the dispersive ionospheric fluctuations by adding a slow source-switching observation. In this talk, I will present the results from the KVN astrometric observations with SFPR and the achievable astrometric accuracy in KVN will be discussed.

  • PDF

차분격자볼츠만법에 의한 Edge음의 직접계산 (Direct Simulation of Edge Tones by the Finite Difference Lattice Boltzmann Method)

  • 강호근;김유택;이영호
    • 유체기계공업학회:학술대회논문집
    • /
    • 유체기계공업학회 2003년도 유체기계 연구개발 발표회 논문집
    • /
    • pp.671-677
    • /
    • 2003
  • Two-dimensional direct numerical simulation of the edge-tones by the finite difference lattice Boltzmann method (FDLBM) is presented. We use a new lattice BGK compressible fluid model that has an additional term and allow larger time increment comparing the conventional FDLBM, and also use a boundary fitted coordinates. We have succeeded in capturing very small pressure fluctuations result from periodically oscillation of jet around the edge. That pressure fluctuations propagate with the sound speed. It is clarified that the sound wave generated in rather wide region and individual vortices do not affect the sound wave propagation.

  • PDF

원자로의 반응도와 온도계수 (Temperature Coefficient of Reactioity)

  • 노윤래
    • 전기의세계
    • /
    • 제15권5호
    • /
    • pp.1-5
    • /
    • 1966
  • The stability and safety of operation of a reactor is determined mainly by the sign and magnitude of its reactivity responses to temperature changes. Reactors are subject to temperature fluctuations due to the changes in reactor power and ambient temperature. These temperature fluctuations cause reactivity disturbances through changes in the nuclear and physical properties of the core. Because of these important phenomena by the temperature effects, a large portion of study and testing on a reactor design has been conducted. In this experiment the overall temperature coefficient of the TRIGA MARK-II reactor is measured. The basic procedure is to change the tgemperature of the water moderator, and from the movements of a newly recalibrated control rod(this is necessary due to the effects of fuel burn-up and control rod depression) required to mintain criticality, the reactivity worth of the temperature change is determined. From this measurement, the overall temperature coefficient seems to be smoothly varying, almost a linear function of temperature, and a value of approximately -0.267${\c}$/$^{\circ}C$ can be obtained for an average temperature range from $17.6^{\circ}C$ to $32.5^{\circ}C$.

  • PDF

계통상태를 고려한 송전선의 ELF 전자계 (ELF Electric and Magnetic Fields under the Transmission Line Including Electric Power System States)

  • 김두현;김상철
    • 한국안전학회지
    • /
    • 제11권3호
    • /
    • pp.89-96
    • /
    • 1996
  • This paper presents a study on the analysis and evaluation for ELF( Extremely Low Frequency) electric and magnetic fields under the transmission line according to the power system states. The power system states are classified into two types, normal state resulting from normal operation and alert state from outages. The current in a system is changed continually owing to the load fluctuations even in a normal operation. To calculate the current of the concerned line in a normal state, the system load level is devided into light, base and heavy load level. In case of contingency, an efficient algorithm based on matrix inversion lemma is developed to figure out the current changes. In order to analyze the variations of ELF field caused by the current fluctuations the electrostatic field approach which is far simpler than the electromagnetic field one based on Maxwell equation is introduced in this paper. The suggested method is applied to the IEEE 14 bus system to demonstrate the usefulness.

  • PDF

Post-processing Technique for Improving the Odor-identification Performance based on E-Nose System

  • Byun, Hyung-Gi
    • 센서학회지
    • /
    • 제24권6호
    • /
    • pp.368-372
    • /
    • 2015
  • In this paper, we proposed a post-processing technique for improving classification performance of electronic nose (E-Nose) system which may be occurred drift signals from sensor array. An adaptive radial basis function network using stochastic gradient (SG) and singular value decomposition (SVD) is applied to process signals from sensor array. Due to drift from sensor's aging and poisoning problems, the final classification results may be showed bias and fluctuations. The predicted classification results with drift are quantized to determine which identification level each class is on. To mitigate sharp fluctuations moving-averaging (MA) technique is applied to quantized identification results. Finally, quantization and some edge correction process are used to decide levels of the fluctuation-smoothed identification results. The proposed technique has been indicated that E-Nose system was shown correct odor identification results even if drift occurred in sensor array. It has been confirmed throughout the experimental works. The enhancements have produced a very robust odor identification capability which can compensate for decision errors induced from drift effects with sensor array in electronic nose system.

The Time Correlation Functions of Concentration Fluctuations in the Lotka Model near the Oscillatory Marginal Steady State

  • 김철주;이동재;고석범;신국조
    • Bulletin of the Korean Chemical Society
    • /
    • 제9권1호
    • /
    • pp.36-40
    • /
    • 1988
  • The time correlation functions of concentration fluctuations due to the random forces near the steady state are evaluated for a general two-component nonlinear chemical system by solving the corresponding two dimensional Fokker-Planck equation. The approximate method of solving the Fokker-Planck equation is based on the eigenfunction expansion and the corresponding eigenvalues for both the linear and nonlinear Fokker-Planck operators are obtained near the steady state. The general results are applied to the Lotka model near the oscillatory marginal steady state and the comparison is made between linear and nonlinear cases.

전기유압 서보시스템의 슬라이딩 모드 위치제어 (Position Control of an Electro-hydraulic Servo System with Sliding Mode)

  • 허준영
    • 드라이브 ㆍ 컨트롤
    • /
    • 제18권3호
    • /
    • pp.16-22
    • /
    • 2021
  • The variable structure controller has the characteristic that while in sliding mode, the system moves along the switching plane in the vicinity of the switching plane, so it is robust to the parameter fluctuations of the plant. However, a controller based on a variable structure may not meet the desired performance when it is commanded to track any input or exposed to disturbances. To solve this problem, a sliding mode controller based on the IVSC approach excluding an integrator is proposed in this study. The proposed sliding mode control was applied to the position control of a hydraulic cylinder piston. The sliding plane was determined by the pole placement and the control input was designed to ensure the existence of the sliding mode. The feasibility of the modeling and controller was reviewed by comparing it with a conventional proportional control through computer simulation using MATLAB software and experiment in the presence of significant plant parameter fluctuations and disturbances.