• 대한산업공학회지
• /
• 제3권1호
• /
• pp.39-47
• /
• 1977

Most of the current literature on inventory theory has been devoted to the study of single stage models. A class of inventory problems which is of great interest is the multistage inventory system which involves a series and hierarchical sequence of stations. This study analyzes some aspect of the series type and multi-stage inventory system, using the fixed cycle ordering which bas a modificatory control function in the system equations. The objective of this study is to clarify the dynamic behavior of the system. The author has derived the theoretical formulas of variation of ordering quantity and stock fluctuation of each stage due to power spectral density function. Influence of parameters such as, (1) intensity of autocorrelation of demand sequence ($\lambda$), (2) forecasting exponential smoothing factors of each stage (${\alpha}_1,\;{\alpha}_2,\;{\alpha}_3$) and (3) production control factor of the 3rd stage ($\gamma$), as operators of the system on the variation of ordering quantity and stock fluctuation of the system. is also clarified. As a result of this study, the relations between the variation of ordering quantity, stock fluctuation and the parameters of the system, have been found. The principles and the theorical analysis presented here will be applicable to more complex type of discrete control systems in constructing the specific condition of the system to minimize inventory variances.

• 수산해양기술연구
• /
• 제58권4호
• /
• pp.359-366
• /
• 2022

In this study, the load fluctuation of the main engine is considered to be a disturbance for the jacket coolant temperature control system of the low-speed two-stroke main diesel engine on the ships. A nonlinear PID temperature control system with satisfactory disturbance rejection performance was designed by rapidly transmitting the load change value to the controller for following the reference set value. The feed-forwarded load fluctuation is considered the set points of the dual loop control system to be changed. Real-coded genetic algorithms were used as an optimization tool to tune the gains for the nonlinear PID controller. ITAE was used as an evaluation function for optimization. For the evaluation function, the engine jacket coolant outlet temperature was considered. As a result of simulating the proposed cascade nonlinear PID control system, it was confirmed that the disturbance caused by the load fluctuation was eliminated with satisfactory performance and that the changed set value was followed.

• 한국추진공학회지
• /
• 제15권4호
• /
• pp.35-40
• /
• 2011

희박 예혼합 가스터빈에서 발생되는 연소 불안정 현상의 메커니즘을 규명하기 위하여 입구 속도 변동에 대한 열발생 변동을 정량화한 화염 전달 함수가 실험적으로 규현되었다. 이를 위하여 실제 가스터빈과 유사한 형태를 갖는 모형 연소기가 제작되었으며, 열발생율의 측정을 위한 가시화 연소기가 장착되었다. 또한 흡기 속도의 변조를 위하여 가변 속도 모터 및 유량 제어 장치가 설계되었고, 이러한 장치들을 통하여 입구 속도 변동이 열발생율의 진폭에 미치는 영향 및 화염 구조의 변화를 실험적으로 계측하였다. 실험 결과 화염 전달 함수는 당량비와 같은 운전 조건과 더불어 속도 섭동 조건에 대하여도 크게 의존하며, 화염의 길이와 섭동파 파장의 비율을 의미하는 Strouhal 수에 의하여 일반화될 수 있었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제36회 춘계학술대회논문집
• /
• pp.430-432
• /
• 2011

희박 예혼합 가스터빈에서 발생되는 연소 불안정 현상의 메커니즘을 규명하기 위하여 입구 속도 변동에 대한 열발생 변동을 정량화한 화염 전달 함수가 실험적으로 규현되었다. 이를 위하여 실제 가스 터빈과 유사한 형태를 갖는 모형 연소기가 제작되었으며, 열발생율의 측정을 위한 가시화 연소기가 장착되었다. 또한 흡기 속도의 변조를 위하여 가변 속도 모터 및 유량 제어 장치가 설계되었고, 이러한 장치들을 통하여 입구 속도 변동이 열발생율의 진폭에 미치는 영향 및 화염 구조의 변화를 실험적으로 계측하였다.

• 한국음향학회지
• /
• 제6권2호
• /
• pp.48-53
• /
• 1987

수면가까이 존재하는 단일주파수 음원에 의한 수심별 sound field에 관하여 수치모델에 의한 결과를 분석하였다. normal mode function의 수심별 특성은 주어진 음속의 기울기에 매우 민감하며 따라서 mode별 특성이 음원으로부터 밀리 떨어진 곳에서의 수심에 따른 변화를 관찰할 수 있다. 특히 양 경계면, 즉 표면과 해저에 가까운 곳에서는 음압이 수심에 따라 일정한 모양의 fluctuation을 하며 해당 주파수 파장의 두배 정도 거리의 상관관계를 나타내었다. 이는 수중음향 관측시에 응용 가능한 결과로써 특히 수중소음 측정시 청음기의 수직거리예측에 활용할 수 있겠다.

• 한국연소학회지
• /
• 제14권4호
• /
• pp.48-53
• /
• 2009

This paper describes the forced flame response in a turbulent premixed gas turbine combustor. The fuel was premixed with the air upstream of a choked inlet to avoid equivalence ratio fluctuations. To impose the inlet flow velocity, a siren type modulation device was developed using an AC motor, rotating and static plates. Measurements were made of the velocity fluctuation in the nozzle using hot wire anemometry and of the heat release fluctuation in the combustor using chemiluminescence emission. The test results showed that flame length as well as geometry was strongly dependent upon modulation frequency in addition to operating conditions such as inlet velocity. Convection delay time between the velocity perturbation and heat release fluctuations was calculated using phase information of the transfer function, which agreed well with the results of flame length measurements. Also, basic characteristics of the flame nonlinear response shown in the current test conditions were introduced.

• 한국생물물리학회:학술대회논문집
• /
• 한국생물물리학회 2003년도 정기총회 및 학술발표회
• /
• pp.67-67
• /
• 2003

Filamentous actin (F-actin) is a two stranded long helix that performs structural function in eukaryotic cells. F-actin had been assembled from Alexa-labeled G-actin and had been confined in microchannel. The fluctuation of single filaments was observed by fluorescence optical microscopy. We measured Tangent-tangent Correlation Function G(s) (where s is the distance along the contour of the chain), which tells us the confining wall effect of wormlike semi-flexible polymers as well as the flexural rigidity, such as persistence length.

• 소음진동
• /
• 제6권5호
• /
• pp.671-677
• /
• 1996

This paper presents the analytical method for predicting turbulence- induced noise in the multilayered cylinder composed of an outer hose, an inner fluid and an internal core. It is assumed that an infinite axisymmetric cylinder is located horizontally in water with free stream velocity and the turbulent boundary layer (TBL) surrounding the outer hose is fully developed and homogeneous. The transfer function at the core surface due to the propagation of the pressure fluctuation within the TBL is formulated using the linearized Navier-Stockes equation for solid and fluid. In the estimation of the energy spectrum of wall pressure fluctuation, the empirical formula proposed by Strawderman based on the Corcos model is used. A general algorithm for the calculation of the pressure level at the surface of a core, that is, turbulence- induced noise, is presented. Through the detailed numerical simulation, it is found that the major noise mechanism is the propagation of the bulge wave along hose.

• 수산경영론집
• /
• 제26권2호
• /
• pp.75-92
• /
• 1995

This paper tried to estimate the pass - through of exchange rate changes to export price of fishery products using export price function. The results are as follows : 1) The variable of fluctuation of exchange rate of Won(equation omitted) to Yen(equation omitted)(variable E2) is more powerful explanatory variable than that of Won to U.S. dollar to explain the fluctiation of export price of fishery products(varible $P_{t}$)- 2) The variable of fish catches(variable K $P_{t}$) is also found to be a statistically significant varible but that of producer price index is not found. 3) The variable E2 have statistically a more influence on variable $P_{t}$ than variable K $P_{t.}$ 4) The estimation shows us that 1% of fluctuation of variable E2 could result in 0.9978% of fluctuation of variable $P_{t.}$

• 한국정밀공학회지
• /
• 제12권11호
• /
• pp.132-139
• /
• 1995

Turbulent boundary layer pressure fluctuation exerted on the surface of a structure can give rise to a elastic stress wave on the surface of the structure. The stress wave so called surface wave, will not only propagate along the surface of structure but also penerate into the structure. To reduce the transmission of stress wave into the structure the elastomer layer is usually attactched on the surface of structure. The transfer function, which is defined herein as the ratio of stress waves at the surface and bottom of the elastomer layer, is derved by use of the cylindrical coordinates system. The elastodynamics of the elastomer layer subjected to the turbulent boundary layer pressure fluctuation is represented by the simplified one degree-of-freedom model for easy prediction of the stress wave transmission as well as efficient design of the elastomer layer.