• Journal of agriculture & life science
• /
• v.46 no.1
• /
• pp.105-111
• /
• 2012

This study was conducted to evaluate the influence of fruit setting order by flower cluster on the fruit weight and the soluble solids content for the strawberry of 'Seolhyang' cultivar. The first flower cluster had higher fruit number, fruit weight, soluble solids content and ratio of large fruit compared to the second and third flower cluster. The fruit set on the upper position fruit in the same flower cluster had higher fruit weight and the soluble solids compared to the fruit set on the lower position fruit in the flower cluster. The fruit weight was highly positive correlated with the soluble solids content. The result indicated that the number of fruit set for marketable yield seemed to be 9-10 per the first flower cluster, 6 per the second flower cluster, 4 per the third flower cluster and 3 per the fourth flower cluster in 'Seolhyang' cultivar.

• Journal of Bio-Environment Control
• /
• v.19 no.4
• /
• pp.392-396
• /
• 2010

This research focused on determining the effectiveness of cluster and/or flower thinning in highbush 'Jersey' blueberry on the yield and fruit quality. The total yield and quality of fruit were compared between thinning methods of control (no thinning), 1/3 cluster thinning, 1/3 cluster thinning + 1/2 flower thinning, 2/3 cluster thinning, and 2/3 cluster thinning + 1/2 flower thinning per each bearing shoot, respectively. Thinning strength significantly affected the yield of bearing shoot and, thus, total yield of control and 1/3 cluster thinning was higher than others. Both cluster and flower thinning, however, significantly affected the fruit growth resulting in the increase of fruit weight, length and width. Even total yield was similar between control and 1/3 cluster thinning, more larger fruit (> 1.6 g) were produced by 1/3 cluster thinning treatment, indicating that flower and/or cluster thinning contributed to the increase of individual fruit growth. Unlike fruit growth, fruit quality was less affected except total soluble solid contents. Total soluble solid level significantly increased in treatments (2/3 cluster thinning, 2/3 cluster thinning + 1/2 flower thinning) with yield decrease. No significant difference in levels of acidity and firmness of fruit was found. Results indicated that fruit growth and total yield of highbush blueberry was more influenced by the thinning strength regardless of cluster or flower than internal quality of fruit such as solid and acid levels.

• Journal of Environmental Science International
• /
• v.24 no.2
• /
• pp.197-205
• /
• 2015

This study was performed to identify the effect of fertilizer application and planting method on growth and yield of 'Seolhyang' strawberry during seedling raising. According to the concentration of fertilizer applied, the height of daughter plants was the highest at an EC of $0.8dS{\cdot}m^{-1}$. Leaf number and crown diameter were greatest at an EC of $0.6-0.8dS{\cdot}m^{-1}$. In the first measurement, root number was highest in non-fertilizer application, while root weight was heaviest in non-fertilizer application and EC $0.4dS{\cdot}m^{-1}$. The higher the concentration of fertilizer applied as culture media, the lower the growth rate. Thirty days after planting on the main field, plant height and number of new leaf were highest at an EC of $0.8dS{\cdot}m^{-1}$. However, no significant difference was found in leaf length and width and chlorophyll content according to fertilizer application. Marketable yield of 25 g or higher was greatest in EC $0.6dS{\cdot}m^{-1}$. In contrast, no significance was found in total marketable yield at an EC of $0.4-0.8dS{\cdot}m^{-1}$. Aconsistent pattern was exhibited in the growth of 1-5 harvesting flower clusters according to planting method. The length of leaf and flower cluster was short and chlorophyll content was low, when bed soil was removed 100% in harvesting of the first flower cluster. In all treatment, leaf length was shortened until harvesting of the second and third flower cluster, but rapidly lengthened in harvesting of the third and fourth flower clusters. Moreover, the length of flower cluster had a increasing tendency from harvesting of the third flower cluster. However, chlorophyll content was reduced continuously until harvesting of the fifth flower cluster, and was lowest in harvesting of the fourth flower cluster without removal of bed soil. Total yield was greatest in treatment of crown removal in bed soil between November and May. Late marketable yield between March and May was highest in treatment of 100% bed soil removal, followed by treatment of crown removal. Marketable yield of 25 g or higher was greatest in treatment of crown removal between December and February, while greatest in treatment of 100% bed soil removal between March and May.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.1282-1291
• /
• 1993

The color image of the rose was segmented by the cluster analysis on the color space into the characteristic sub-regions, the degree of bloom of the flower was represented numerically base on the segmented image and judged by the artificial neural network system whose input variable were the characteristic regions. Judgement by neural system were compared with that of the farmers and it was found that degree of agreement were fairly good.

• Horticultural Science & Technology
• /
• v.29 no.4
• /
• pp.288-292
• /
• 2011

This study was undertaken to evaluate the yield and petiole burst occurrence rate of ever-bearing strawberry by controlling crown numbers per plant and the first flower cluster for summer production at highland. The cultivar 'Flamenco' was planted on April 20 and split-plots were designed by managing the number of crown per plant in the main plot and the removed and non-removed first flower cluster in the sub-plot. Uptaken mineral amount of the plants showing petiole burst were higher than normal plants. Plants with one crown per plant showed 62-65% petiole burst rate in contrast to plants with three crowns per plant which showed 57-58% petiole burst. Date of initiation of the second flower cluster with less crown and removed first flower cluster was delayed. The flower clusters number of the plants managed with one crown per plant was 5.6, compared with 9.2 flower clusters of plants with three crowns per plant. The first harvesting with removed first flower cluster was delayed around 42-44 days. Aa a result, the yield performance of plants with two or three crowns per plant was 11,183-11,733 $kg{\cdot}ha^{-1}$ and the amount 65-75% higher than that of plants with one crown and removed first cluster.

• Journal of Environmental Science International
• /
• v.24 no.12
• /
• pp.1673-1679
• /
• 2015

This study was conducted to investigate the effects of fruit set internode on the germination of watermelon seeds. Generally fruits setted in higher than 20 internode were high percent of germination, fruit setted in low internode(5-10) is low. The higher fruit-set internode, fruit weight was significantly increased, but 1,000 seed weight was decreased the more fruit set internode. However number of seed was about 300 seeds irrespective of fruit-set internode. Investigating viability of seed by BP test, general percent germination was recorded highest at 5 flower cluster above 20 internode of fruit-set internode. In contrast, condition of fruit setted on 3, 4, 6 flower cluster were high percent of germination, regarded as unnormal germination not to be as normal seedling by 2~3%. Seed harvested at 5 flower-cluster had high viability on hypocotyl height and diameter of seedling through early growth test, but were not significant. Therefore 5 flower-cluster was optimum fruit-set internode to obtain high-quality seed.

• Journal of Environmental Science International
• /
• v.25 no.6
• /
• pp.749-756
• /
• 2016

This study shows how the growth of the top part of plants cultivated using the single-row strawberry method, with 12 cm plant spacing, as well as that of plants cultivated through conventional planting, is characterized by the presence of many leaves in the first flower cluster harvest. The leaf area and crown diameter were the largest in the 12 cm spacing method. The hight top fresh weight (59.2 g) was detected wen the 12 cm spacing method was used followed by conventional planting and, 9 cm and 6 cm spacing method. The K and Ca contents in the first flower cluster were the highest when the 12 cm spacing method (2.0% and 2.1%, respectively) and conventional planting, (0.42% and 0.86%, respectively) were used, and these values were significantly higher than the K and Ca contents obtained using the other two methods. The N, P, Mg, Fe, and B contents show no significant differences across the planting methods. The sugar content of the first flower cluster fruits was the highest when the 12 cm spacing method was used, while the sugar content of the fourth flower cluster fruits was highest after conventional planting. Firmness was the highest in the first, third, and fourth flower clusters after conventional planting, while no significant differences were observed for the 6 cm, 9 cm, and 12 cm spacing methods. A yield of 25 g or above during November to December was observed to be the highest when the 12 cm spacing method was used, while a yield of 10-16 g was the highest when both the 9 cm and 12 cm spacing methods werw used. The yield of products in January-April was the highest when the 12 cm spacing and conventional planting methods were used, and total product yield was also the highest for these methods. A significant portion of non-marketable products (39 g) was obtained when the conventional planting method was used.

• Current Research on Agriculture and Life Sciences
• /
• v.31 no.4
• /
• pp.265-271
• /
• 2013

The objective of this study was to find out the optimum number of fruiting per a flower cluster on 5 domestic strawberry cultivars (Fragaria${\times}$ananassa Duch.), 'Daewang', 'Ssanta', 'Okmae', 'Seolhyang' and 'Maehyang'. Therefore, three ways of fruit thinning, 4~5 fruiting, 7~9 fruiting and all fruiting per a flower cluster were compared. After fruit thinning, the first fruit weights were increased from the second flower cluster on 'Seolhyang' and 'Maehyang', but from the third one on 'Daewang' and 'Ssanta'. There was no difference in first fruit weight by the flower thinning ways on 'Okmae'. The mean fruit weights of all the cultivars were increased and sugar contents also were increased, but acidities were decreased. The peduncle lengths were shortened by fruit thinning, but there was no difference in number of leaf, petiole length and crown diameter. Marketable yields by 4~5 fruiting per a flower cluster than all the fruit setting were higher 4.3% and 6.6% respectively on 'Daewang' and 'Maehyang'. In contrast, the yields were higher 3.1%, 3.5% and 9.1% in 7~9 fruiting per a flower cluster than all fruiting on 'Ssanta', 'Okmae' and 'Seolhyang' respectively. As the result, we could improve the fruit quality and could increase marketable yield by fruit thinning with matching flowering characteristics of those strawberry cultivars.

• Journal of Bio-Environment Control
• /
• v.23 no.3
• /
• pp.205-211
• /
• 2014

This study aimed to examine the effect of different fruit-loads on fruit yield, quality, and plant growth of 'Seolhyang' strawberry. Fruit loads were adjusted from the first to the fourth flower cluster so that the number of fruits became 20, 25, and 30, and non-flower thinning of some was made. The more the number of fruits per plant was, the greater the total yield obtained, but marketable yield decreased and non-marketable yield increased. Compared to the treatment whose fruit load was adjusted, the control with non-flower thinning had more fruit yield in the first and second flower clusters but tended to have less fruit yield in the third and fourth flower clusters. The lower the fruit load was, the more soluble solids content of fruits increased. The lower the fruit load of a flower cluster was, the faster its harvest time reached. Harvest of fruit load of 20 was faster by 10 days in the second and fourth flower clusters relative to the control. On November 24, 2012, flowering thinning of the first flower cluster was made. On March 7, 2013, fruit dry weight of the second flower cluster was most heavy in the control. Dry weight of roots decreased in the control and the fruit load of 30 compared to November 24. On April 9, fruit dry weight of the third flower cluster did not have significant difference according to fruit load, however the more the fruit load was, the smaller dry weight of leaf, root, and crown became, which were vegetative organs. On May 12, the more the fruit load, the smaller leaf area and dry weight of vegetative organs and differences from varying fruit-loads became considerable in later period of growth. Appropriate fruit load of 'Seolhyang' strawberry were from 20 to 25. Maintaining balance between vegetative and fruit growth by adjusting fruit load is very important for stable fruit production.

• FLOWER RESEARCH JOURNAL
• /
• v.18 no.4
• /
• pp.231-237
• /
• 2010

This study was conducted to improve commercial quality of a cut spray chrysanthemum 'Ilweol' bred in Korea by foliar application of daminozide, suppressing excessive elongation of peduncle caused by high temperature in summer season production. Applications were made at three floral bud developmental stage (I, II, and III), and concentrations used were 0, 500, 1000, and $2000mg{\cdot}L^{-1}$. Cut flower length and peduncle length showed the greatest repression of elongation through daminozide treatments at stage III and stage II, respectively. Daminozide also gradually reduced values of those in a concentration-dependant manner. Flower diameter increased compared to control as daminozide was sprayed at later stage but decreased in daminozide concentration-dependant manner. Angle of flower cluster on apical part of whole plant showed the best results when sprayed with $2,000mg{\cdot}L^{-1}$ at stage III. Among all combinations, $2,000mg{\cdot}L^{-1}$ daminozide at stage II recorded the highest angle of flower cluster and showed 31.3% increment as compared to control. The number of fully expanded flowers showed the highest values using $2,000mg{\cdot}L^{-1}$ daminozide at stage III than the other treatments and total floral buds also showed the highest values using $2,000mg{\cdot}L^{-1}$ daminozide at stage I than the other treatments. In cut spray chrysanthemum cultivar 'Ilweol' bred in Korea, foliar-applying with $2,000mg{\cdot}L^{-1}$ at stage III most effectively suppressed excessive peduncle elongation, angle of flower cluster, and increased the number of flowers in summer. However, this combination affected negatively the other commercial qualities, reducing cut flower length and flower diameter. Therefore, we recommended that foliar application stage and daminozide concentration was stage III and $500mg{\cdot}L^{-1}$, respectively, in a practical culture and cut flower quality for 'Ilweol'.