• 대한기계학회논문집
• /
• 제16권5호
• /
• pp.873-882
• /
• 1992

본 연구에서는 축대칭 형상의 하이드로 미케니칼 디프드로잉 공정을 강소성 유한요소법으로 해석하는 것이다. 본 논문에서는 Fig.1에서 보이는 바와 같은 경우 에 대하여 평두 펀치(flat headed punch)를 사용한 공정을 강소성 유한요소법으로 해 석하였으며 펀치 행정에 따른 챔버내의 압력 및 플랜지부의 압력분포를 구하였다. 접촉부의 처리는 플랜지부의 압력분포를 구하였다. 접촉부의 처리는 Yang등이 제안 한 방법을 적용하였다. 이론해석의 타당성을 알아보기 위하여 금형을 설계, 제작하 고 실험을 수행하여 결과를 비교 검토하였다.

• 대한통합의학회지
• /
• 제9권1호
• /
• pp.23-31
• /
• 2021

Purpose : To compare the immediate effects of air stacking maneuver using resuscitator bags and balloons. Methods : Twenty healthy young adults participated in this study. Forced vital capacity (FVC) and peak cough flow (PCF) tests were performed at pre-intervention, and then, the maximum insufflation capacity (MIC), forced expiratory volume in 1 s (FEV1), FEV1/FVC, peak expiratory flow (PEF), and peak cough flow (PCF) were measured using the air stacking maneuver via resuscitator bags and balloons. Interventions were randomly performed, and a 40-min break was provided between interventions. The evaluation process in this study was conducted in accordance with the guidelines of the American Thoracic Society (ATS) 2019. To compare the three outcomes measured at pre-and post-interventions, repeated measures analysis of variance was performed. Results : A significant difference was found in the MIC, FEV1, PEF, and PCF after the air stacking maneuver using resuscitator bags and balloons, whereas no significant difference was observed between resuscitator bags and balloons. Conclusion : No significant difference was found in the immediate effect of the air stacking maneuver using resuscitator bags and balloons in this study. Air stacking maneuver using balloons can increase the success rate of the techniques by providing visual feedback on the amount of air insufflation when performed with balloon blowing exercise. Balloons are cheaper and easier to buy compared to manual resuscitator bags; therefore, education on the air stacking maneuver using balloons will have a positive effect on pulmonary rehabilitation.

• 한국지구과학회지
• /
• 제43권6호
• /
• pp.712-736
• /
• 2022

To understand the characteristics of low-level clouds (CLs), environmental variables are composited on each CL using individual surface observations and six-hourly upper-air meteorologies around the globe. Individual CLs has its own distinct environmental conditions. Over the eastern subtropical and western North Pacific Ocean in JJA, stratocumulus (CL5) has a colder sea surface temperature (SST), stronger and lower inversion, and more low-level cloud amount (LCA) than the climatology whereas cumulus (CL12) has the opposite characteristics. Over the eastern subtropical Pacific, CL5 and CL12 are influenced by cold and warm advection within the PBL, respectively but have similar cold advection over the western North Pacific. This indicates that the fundamental physical process distinguishing CL5 and CL12 is not the horizontal temperature advection but the interaction with the underlying sea surface, i.e., the deepening-decoupling of PBL and the positive feedback between shortwave radiation and SST. Over the western North Pacific during JJA, sky-obscuring fog (CL11), no low-level cloud (CL0), and fair weather stratus (CL6) are associated with anomalous warm advection, surface-based inversion, mean upward flow, and moist mid-troposphere with the strongest anomalies for CL11 followed by CL0. Over the western North Pacific during DJF, bad weather stratus (CL7) occurs in the warm front of the extratropical cyclone with anomalous upward flow while cumulonimbus (CL39) occurs on the rear side of the cold front with anomalous downward flow. Over the tropical oceans, CL7 has strong positive (negative) anomalies of temperature in the upper troposphere (PBL), relative humidity, and surface wind speed in association with the mesoscale convective system while CL12 has the opposite anomalies and CL39 is in between.

• 디지털융복합연구
• /
• 제11권2호
• /
• pp.175-182
• /
• 2013

본 연구에서는 주택 수요와 공급의 상호영향관계 메커니즘을 이용하여 가격 시뮬레이션 모형을 개발하였다. 가격 시뮬레이션 모형의 핵심 알고리즘은 피드백 제어 이론을 이용한 시스템 다이나믹스 기반의 스톡 플로우 변수이며, 이러한 원리를 이용하여 서울지역 아파트 가격변화 행태를 모델링하였다. 가격 행태를 결정하는 피드백 메커니즘은 중장기 경기변동 시나리오 하에 대출 이자율을 정책변수로 아파트 매매 수요자와 공급자 규모를 스톡 변수로 설정하고, 이들 간의 상호 영향관계를 검증하였다. 본 논문을 통하여 향후 아파트 가격 추이는 아파트 매매 수요자와 공급자 규모의 행태 변화와 수요자와 공급자가 갖는 가격에 대한 반응 매개변수간의 영향관계로 구성된다. 또한 향후 경기 전망 및 대출이자율 등 거시경제의 상황에 따라 아파트 매매가격은 변화함을 알 수 있었다. 제시된 아파트 매매 가격 시뮬레이션 계량모델은 양도세 및 취득세 감면 등 비 금융 관련 부동산정책변수와 대출이자 조정 등 금융 관련 정책변수의 보다 정확하고 충분한 데이터를 적용하면 실무 적용과 정부 주택정책입안에 활용 할 수 있을 것으로 판단된다.

• 정보교육학회논문지
• /
• 제24권1호
• /
• pp.117-129
• /
• 2020

본 논문은 기존 컴퓨팅 사고력 평가 연구를 분석하고 보완하여 형성적 관점에서 컴퓨팅 사고력을 평가하는 방안을 탐색하고, 텍스트 기반 프로그래밍 언어인 파이선을 활용한 프로그래밍 언어 학습 평가를 위한 평가 프로세스를 설계하기 위해 수행되었다. 이와 같은 목적으로 컴퓨팅 사고력 영역을 탐색하고 평가 설계에 관련된 연구를 분석하였다. 또한, 초보자가 학습하는 파이선 프로그래밍의 학습 영역을 확인하고, 파이선 학습을 통해 획득할 수 있는 컴퓨팅 사고력 영역을 규명하였다. 이들을 종합하여 컴퓨팅 사고력에 해당하는 구문을 분석하여 피드백을 제공하는 평가 방법을 설계하였다. 아울러, 순서도와 의사코드를 활용하여 아이디어를 나타내게 함으로써 반성적 사고를 통한 자기평가가 가능하게 하고, 커뮤니티를 활용한 코드공유 및 의사소통을 통해 동료피드백이 가능한 평가 프로세스를 설계하였다는 데에 본 연구의 시사점이 있다.

• 제어로봇시스템학회논문지
• /
• 제17권2호
• /
• pp.190-197
• /
• 2011

In industrial distributed control systems, sensors collect data from the physical environment periodically and transmit them to the actuators, which process the control operations based on the received data. For the effective operation of the control systems, the data transmitted by the sensors has to be delivered to the actuators reliably within the deadline, and if the message reception rate of the actuators becomes lower than a threshold, then the performance of the control systems drops greatly. This paper suggests a message routing protocol to transmit periodic messages reliably in a distributed control system based on wireless sensor networks. For reliable message transmission, the proposed protocol selects a routing path whose end-to-end message reception rate is the highest before transmitting data messages. The proposed protocol has the capability of maintaining a target message reception rate for each flow. To maintain the required target reception rate, each destination monitors the actual message reception rate periodically and transmits a feedback message to the source if it drops below the target reception rate. On receiving the feedback message, the source tries to find a new path which can satisfy the target rate. The performance of the proposed protocol has been evaluated using simulation and compared with other protocols in terms of the message reception rate, the message delay and delay jitter, and so on. The simulation results show that the proposed protocol has a higher message reception rate and comparable message delay and delay jitter to other protocols. The simulation results also show that the proposed protocol has an ability to adapt well to the dynamic network traffic change.

• Korean Journal of Chemical Engineering
• /
• 제35권12호
• /
• pp.2336-2347
• /
• 2018

The azeotrope of methyl acetate methanol and water was isolated using extractive distillation with water as entrainer. The pressure-swing extractive distillation (PSED) process and vapor side-stream distillation column (VSDC) with the rectifier process were designed to separate the methyl acetate, methanol and water mixture. It was revealed that the VSDC with the rectifier process had a reduction in energy consumption than the PSED process. Four control schemes of the two process were investigated: Double temperature control scheme (CS1), $Q_R/F$ feedforward control of reboiler duty scheme for PESD (CS2), $Q_R/F$ feedback control scheme for VSDC (CS3), the feedback control scheme of sensitive plate temperature of side-drawing distillation column to dominate the compressor shaft speed (CS4). Feed flow and composition disturbance were used to evaluate the dynamic performance. As a result, CS4 is a preferable choice for separation of methyl acetate-methanol-water mixture. A control scheme combining the operating parameters of dynamic equipment with the control indicators of static equipment was proposed in this paper. It means using the sensitive plate temperature of side-drawing column to control the compressor shaft speed. This is a new control scheme for extractive distillation.

• Nuclear Engineering and Technology
• /
• 제52권12호
• /
• pp.2699-2708
• /
• 2020

Helical-coil steam generator (HCSG) technology is a major design candidate for small modular reactors due to its compactness and capability to produce superheated steam with high generation efficiency. In this paper, we investigate the feasibility of the passively autonomous power maneuvering by coupling the 3-D transient multi-physics of a soluble-boron-free (SBF) core with a time-dependent HCSG model. The predictor corrector quasi-static method was used to reduce the cost of the transient 3-D neutronic solution. In the numerical system simulations, the feedwater flow rate to the secondary of the HCSGs is adjusted to extract the demanded power from the primary loop. This varies the coolant temperature at the inlet of the SBF core, which governs the passively autonomous power maneuvering due to the strongly negative coolant reactivity feedback. Here, we simulate a 100-50-100 load-follow operation with a 5%/minute power ramping speed to investigate the feasibility of the passively autonomous load-follow in a 450 MW_th SBF PWR. In addition, the passively autonomous frequency control operation is investigated. The various system models are coupled, and they are solved by an in-house Fortran-95 code. The results of this work demonstrate constant steam temperature in the secondary side and limited variation of the primary coolant temperature. Meanwhile, the variations of the core axial shape index and the core power peaking are sufficiently small.

• 대한간호학회지
• /
• 제49권4호
• /
• pp.398-410
• /
• 2019

Purpose: This study used a system dynamics methodology to identify correlation and nonlinear feedback structures among factors affecting adolescent cyberbullying victims (CV) in Korea and to construct and verify a simulation model. Methods: Factors affecting CV were identified by reviewing a theoretical background in existing literature and referencing various statistical data. Related variables were identified through content validity verification by an expert group, after which a causal loop diagram (CLD) was constructed based on the variables. A stock-flow diagram (SFD) using Vensim Professional 7.3 was used to establish a CV model. Results: Based on the literature review and expert verification, 22 variables associated with CV were identified and the CLD was prepared. Next, a model was developed by converting the CLD to an SFD. The simulation results showed that the variables such as negative emotions, stress levels, high levels of conflict in schools, parental monitoring, and time spent using new media had the strongest effects on CV. The model's validity was verified using equation check, sensitivity analysis for timestep and simulation with 4 CV adolescent. Conclusion: The system dynamics model constructed in this study can be used to develop intervention strategies in schools that are focused on counseling that can prevent cyberbullying and assist in the victims' recovery by formulating a feedback structure and capturing the dynamic changes observed in CV. To prevent cyberbullying, it is necessary to develop more effective strategies such as prevention education, counseling and treatment that considers factors pertaining to the individual, family, school, and media.

• Nuclear Engineering and Technology
• /
• 제51권6호
• /
• pp.1540-1553
• /
• 2019

A nuclear power plant (NPP) is a highly complex system-of-systems as manifested through its internal systems interdependence. The negative impact of such interdependence was demonstrated through the 2011 Fukushima Daiichi nuclear disaster. As such, there is a critical need for new strategies to overcome the limitations of current risk assessment techniques (e.g. the use of static event and fault tree schemes), particularly through simulation of the nonlinear dynamic feedback mechanisms between the different NPP systems/components. As the first and key step towards developing an integrated NPP dynamic probabilistic risk assessment platform that can account for such feedback mechanisms, the current study adopts a system dynamics simulation approach to model the thermal dynamic processes in: the reactor core; the secondary coolant system; and the pressurized water reactor. The reactor core and secondary coolant system parameters used to develop system dynamics models are based on those of the Palo Verde Nuclear Generating Station. These three system dynamics models are subsequently validated, using results from published work, under different system perturbations including the change in reactivity, the steam valve coefficient, the primary coolant flow, and others. Moving forward, the developed system dynamics models can be integrated with other interacting processes within a NPP to form the basis of a dynamic system-level (systemic) risk assessment tool.