• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1998년도 춘계학술발표회 논문집
• /
• pp.101-110
• /
• 1998

The safe passing maneuver of a large vessel along the designed course through a narrow channel in the flow of strong current is greatly related with her maneuvering characteristics. This paper treats maneuvering characteristic of a large vessel changing her course with the use of her control surface in a narrow channel with strong current. In this paper, the author proposed mathematical models of calculating maneuvering motions of the very large LNG tanker altering course using her control surface and calculated passing tracks of the vessel through the channel and compared the calculated results with those of maneuvering simulations by a desk-top simulator. In general the motions with the calculated values and the simulated motions are well coincided with each other.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2012년도 춘계학술발표회 초록집
• /
• pp.270-273
• /
• 2012

오픈 소스인 FDS(fire dynamic simulator)는 건물, 터널내의 화재나 연기, 열기류의 거동을 연구하기 위하여 국내외적으로 광범위하게 이용되고 있다. 체계적인 연구와 확장이 가능하도록 소스코드와 프로그램구조, 각종 메뉴얼을 갖추고 있으며 향후 개발 방향을 온라인을 통해서 소스코드와 함께 공개하고 있다. 비압축성 비정상해석을 근간으로 하고 있으며 난류유동을 해석할 수 있도록 DNS와 LES모델을 가지고 있다. 화재, 연소, 스프링클러, 화재 확산 등의 모델링을 제공하고 있다. 이러한 모델을 바탕으로 다양한 시나리오의 재난, 피난에 적용할 수 있다. 향후 이러한 기본 모델을 바탕으로 새로운 재난 시나리오에 따라 새로운 알고리즘의 적용하기 위해서는 FDS 기본적인 구조와 모델, 그리고 한계점을 이해할 필요가 있다. 본 연구에서는 이러한 FDS모델을 더욱 확장하기 위한 일환으로 FDS(V5.5.3)의 기본적인 구조을 파악하고 몇 가지 검증모델(verification)에 적용하였다. 또한 이를 향후 FDS의 소스코드를 확장할 수 있는 근간으로 삼고자 한다.

• 대한교통학회:학술대회논문집
• /
• 대한교통학회 1998년도 Proceedings 제34회 추계 학술발표회
• /
• pp.226-235
• /
• 1998

본 논문에서는 추종 모형을 이용한 미시 교통류 시뮬레이션 모형을 개발하고, 이 모형을 통한 시뮬레이션을 통하여 단속류에서 검지기의 설치 위치에 따른 검지 특성을 알아보고, 교통정보 수집용의 검지기의최적 위치에 대해 평가하였다. 검지기로부터 발생하는 교통량, 점유율, 속도 자료중 링크의 통행시간을 가장 잘 반영하는 것은 점유율에 의한 검지기의최적위치는 정지선으로부터 150∼250m이다. 점유율 다음으로 통행시간을 잘 반영하는 자료는 지점속도로서 점유율보다는 상관관계가 낮지만, 양호한 설명력을 가지는 것으로 보인다. 교통량 자료는 상관관계가 낮으며, 교통량에 의한 위치 선정은 각 모의 실험 결과에서 일관적이지 않아 적절한 설명변수가 아니라고 판단하였다. 모든 경우에서, 정지선이나 링크 최상류에 위치한 검지기로부터의 자료는 통행시간과 독립적이므로 이러한 검지기는 교통정보 수집용을 사용할 수 없으며, 일반적인 검지기의최적 위치는 정상상태의 교통류 뿐만 아니라 대기행렬내에 존재하여 매우 혼잡한 상태를 경험할 수 있는 위치라고 할수 있다.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1994년도 춘계학술발표회 초록집
• /
• pp.138-143
• /
• 1994

A simplified steam generator model has been developed for the simulation of the operational transients of CANDU nuclear power plant. For the analysis of the secondary side, a control volume approach is used and the flow conservation equations are applied for each control volume. The typical steam generator control logic such as the level control and the pressure control are incorporated into the steam generator model with appropriate interface conditions. The steam line including ASDV, CSDV, and governor valve also has been modeled. Test results for typical operational transient case show reasonable transient behavior of steam generator in a real time basis, which is promising for a CANDU engineering simulator.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 A
• /
• pp.544-546
• /
• 2001

This paper presents the results of power flow of North-South Korea system with interconnected cases which were proposed by various present studies. PSS/E and PowerWorld Simulator were used to analyze the inter connected system with several interconnected lines alternatives. The results would be very useful to select the best alternative for interconnection with considering several evaluation terms.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전력기술부문
• /
• pp.414-417
• /
• 2001

This paper presents the results of power flow of North-South Korea system with interconnected cases which were proposed by various present studies PSS/E and PowerWorld Simulator were used to analyze the inter connected system with several interconnected lines alternatives. The results would be very useful to select the best alternative for interconnection with considering several evaluation terms.

• Transactions on Electrical and Electronic Materials
• /
• 제13권6호
• /
• pp.292-296
• /
• 2012

An optimum heat sink for a 30 W chip on board (COB) LED down-light is designed, fabricated, and characterized. By using the SolidWorks Flow simulator and thermal analysis software, the thermal characteristics of the optimum heat sink is analyzed. Four different types of heat sink are simulated and an optimum structure of the heat sink is found. The simulated temperature of the heat sink when operating the LED down-light is $55.9^{\circ}C$, which is only a difference of $2^{\circ}C$ from the measured temperature. In order to reduce the temperature further, a copper spreader is introduced to the heat sink. The temperature of the heat sink with the copper spreader is $3^{\circ}C$ lower than without the copper spreader.

• 설비공학논문집
• /
• 제17권3호
• /
• pp.243-249
• /
• 2005

The present study has been conducted to simulate dynamics of a gas engine-driven heat pump(GHP) for design of control algorithm. The dynamic modeling of a GHP was based on conservation laws of mass and energy. For automatic control of refrigerant pressures, actuators such as engine speed, outdoor fan, coolant three-way valves and liquid injection valve were PI or P controlled. The simulation results showed physical behavior that is realistic enough to apply for control algorithm design.

• Asia pacific journal of information systems
• /
• 제8권2호
• /
• pp.69-83
• /
• 1998

Some simulation tools have been developed to support business process reengineering. These tools can be used to not only analyze an as-is model of the existing process but also assess the potential value and feasibility of to-be models. But most of them are restricted to analyzing and redesign of the workflow only. Little attention is paid to the organization of people and their roles. This paper Presents a new methodology for business process simulation modeling and analysis. The methodology is based on the concepts of roles and customer-supplier chains. So the proposed methodology allows for tracking people and their roles affected by reengineering the business process. It enables one to analyze and evaluate not only workflow, but roles that are part of the flow. This paper developed a simulator to systematically construct simulation models and conduct simulations easily and efficiently. A case study is also presented as an illustrative example.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1609-1611
• /
• 1994

In ECR and helicon reactors for plasma processing, a high density plasma is generated in a source region which is connected to a diffusion region where the processing takes place. Large density and potential gradients can develop at the orifice of the source which drive ion currents into the diffusion region. The average ion velocity may become the order of the sound velocity. Measurements of the ion saturation current to a Langmuir probe are used as a standard method of determining the plasma density in laboratory discharges. However, the analysis becomes difficult in a steaming plasma. We have used the HAMLET plasma simulator to simulate the ion flow to a large langmuir probe in an ECR plasma. The collection surface was aligned with the Held upstream, normal to the field, and downstream. ion trajectories through the electric and magnetic fields were calculated including ion-neutral collisions. We examines the ratio of ion current density to plasma density as a function of magnetic field and pressure.