• 제목/요약/키워드: flow monitoring

검색결과 1,247건 처리시간 0.051초

빗물 자동모니터링장치와 SWMM 모델을 이용한 강우시 도시지역 오염부하량 예측에 관한 연구 (Application of Automatic Stormwater Monitoring System and SWMM Model for Estimation of Urban Pollutant Loading During Storm Events)

  • 서동일;방철호
    • 대한환경공학회지
    • /
    • 제34권6호
    • /
    • pp.373-381
    • /
    • 2012
  • 대전의 도시 소하천, 관평천 유역을 연구대상지역으로 강우시의 유량 및 수질 변화 특성을 파악하기 위한 원격 제어실시간 자동 모니터링 시스템을 설치하여 자료를 확보하고 이 시스템을 이용하여 확보된 강우시 연속측정 자료를 이용하여 도시유역 모델인 SWMM (Storm Water Management Model) 모델을 보정하는 데 사용하였다. 실시간 자동 모니터링 시스템은 강우량계, 초음파 수위계, 자동수질측정장치, 자동취수장치, 데이터 로거 및 전송장치 등으로 구성되었으며 원격으로 제어할 수 있도록 설계되었다. 강우시 유량은 초음파 수위계와 사각 위어 공식을 이용하여 지속적으로 측정이 가능하도록 설계되었으며 정확도는 수동측정을 병행하여 확인하였다. 수질센서로 측정할 수 없는 항목은 자동채수기에 의해 일정시간 간격으로 시료를 채취한 후 실험실로 이송하여 분석하여 자료를 확보하였다. 위에서 실측된 유량 및 수질 연속 자료를 이용하여 연구대상지역에 대해 SWMM 모델을 구축하였다. SWMM 모델의 보정과 검증 결과 유량은 매우 양호한 수준으로 예측하고 있으나 BOD, COD, SS, TN, TP 등의 예측은 강우 특성에 따라 차이가 있는 것으로 나타났다. 본 연구는 SWMM에 나타난 바와 같은 특정 유역에 고정된 형태의 오염물질 축적과 유출현상을 나타내는 경험식이 강우 및 선행강우 특성을 반영하여 수정될 필요가 있다는 것을 시사하고 있다. 본 연구에서 제안된 빗물 자동모니터링 및 모델링 시스템은 향후 강우에 따른 하천 수질관리를 위한 유역단위의 빗물 수량 수질 관리시설의 설계 및 운영에 중요한 자료로 활용될 수 있을 것으로 기대된다.

보일러 내부 고온가스에 노출된 전열 튜브에서의 열유속 평가 방법 (Estimation method of heat flux at tube bank exposed to high temperature flue gas in large scale coal fired boilers)

  • 정재진;송정일
    • 한국태양에너지학회:학술대회논문집
    • /
    • 한국태양에너지학회 2009년도 추계학술발표대회 논문집
    • /
    • pp.259-264
    • /
    • 2009
  • Most of the fossil power plants firing lower grade coals are challenged with maintaining good combustion conditions while maximizing generation and minimizing emissions. In many cases significant derate, availability losses and increase in unburned carbon levels can be attributed to poor combustion conditions as a result of poorly controlled local fuel and air distribution within the boiler furnace. The poor combustion conditions are directly related to the gas flow deviation in upper furnace and convection tube-bank but a less reported issue related to in large-scale oppose wall fired boilers. In order to develop a on-line combustion monitoring system and suggest an alternative heat flux estimation method at tube bank, which is very useful information for boiler design tool and blower optimizing system, field test was conducted at operating power boiler. During the field test the exhaust gases' temperature and tube metal temperature were monitored by using a spatially distributed sensors grid which located in the boiler's high temperature vestibule region. At these locations. the flue gas flow is still significantly stratified, and air in-leakage is minimal which enables tracing of poor combustion zones to specific burners and over-fire air ports. Test results showed that the flue gas monitoring method is more proper than metal temperature distribution monitoring for real time combustion monitoring because tube metal temp. distribution monitoring method is related to so many variables such as flue gas, internal flow unbalance, spray etc., Heat flux estimation at the tube bank with flue gas temp. and metal temp. data can be alternative method when tube drilling type sensor can't able to use.

  • PDF

Construction of a Pilot Headbox System and Pressure Monitoring Apparatus for the Development of High Speed Hydraulic Headboxes

  • Youn, Hye-Jung;Lee, Hak-Lae
    • 펄프종이기술
    • /
    • 제35권5호
    • /
    • pp.37-45
    • /
    • 2003
  • To investigate the influence of the design and operating parameters of the headbox on hydrodynamics, a pilot headbox system and pressure monitoring apparatus were constructed. The pilot headbox system consisted of a circulating water reservoir, centrifugal pump, distributor, turbulence generator and slice. The distributor was designed to function as a pressure attenuator. Flow rate to the headbox and MD and CD velocity profiles in the slice zone were monitored using an ultrasonic flowmeter and Pitot tubes, respectively. As the distance from the step diffusor increased, evener CD velocity profile was observed. Wall effect increased with the increase of the velocity. Flow stability in the headbox was evaluated by injecting a dye at the outlet of the distributor. Application of theoretical analysis based on CFD in designing headboxes is briefly discussed.

가속소음을 활용한 실시간 거시 교통류 모니터링 (Real Time Macroscopic Traffic Flow Monitoring Using Acceleration Noise)

  • 엄기종;이청원
    • 한국ITS학회 논문지
    • /
    • 제8권2호
    • /
    • pp.60-66
    • /
    • 2009
  • Acceleration Noise는 교통류의 안정성을 진단하는데 중요한 지표이다. 하지만, 기존의 연구에서는 개별차량의 Acceleration Noise에 대해서만 수행되었고, 거시적 관점에서의 Acceleration Noise에 대해서는 연구가 이루어지지 않은 실정이다. 본 논문에서는 거시적 교통류 모니터링 지표인 Network Acceleration Noise를 제안하고, 이를 분석하여 거시 교통류 모니터링 활용방안에 대한 연구를 수행하였다.

  • PDF

금정터널내의 지하수 유출량과 기저유출량 변화 분석 (Analysis of Groundwater Discharge into the Geumjeong Tunnel and Baseflow Using Groundwater Modeling and Long-term Monitoring)

  • 정재열;함세영;유일륜;황학수;김상현;김문수
    • 한국환경과학회지
    • /
    • 제24권12호
    • /
    • pp.1691-1703
    • /
    • 2015
  • When constructing tunnels, it is important to understand structural, geological and hydrogeological conditions. Geumgeong tunnel that has been constructed in Mt. Geumjeong for the Gyeongbu express railway induced rapid drawdown of groundwater in the tunnel construction area and surroundings. This study aimed to analyze groundwater flow system and baseflow using long-term monitoring and groundwater flow modeling around Geumgeong tunnel. Field hydraulic tests were carried out in order to estimate hydraulic conductivity, transmissivity, and storativity in the study area. Following the formula of Turc and groundwater flow modeling, the annual evapotranspiration and recharge rate including baseflow were estimated as 48% and 23% compared to annual precipitation, respectively. According to the transient modeling for 12 years after tunnel excavation, baseflow was estimated as $9,796-9,402m^3/day$ with a decreasing tendency.

대장균 발효공정에서 흐름주입분석을 이용한 글루코스와 초산의 온라인 모니터링 (On-line Monitoring of Glucose and Acetate by Flow-Injection Analysis in Escherichia coli Fermentation Process)

  • 이종일
    • KSBB Journal
    • /
    • 제13권3호
    • /
    • pp.244-250
    • /
    • 1998
  • 글루코스와 초산을 온라인 모니터링 하기위한 흐름주입분석기 술이 개발되었고 대장균발효공정에 이용되었다. 또한, Epoxy 고 분자 담체에 고정화된 GOD와 SOD 를 이용한 GOD-FIA와 SOD-FlA의 특성을 연구했다. 즉, FIA 의 조작온도, 운반용액 속의 첨 가제 (Triton, EDTA, natrium azid 등), 분석 시 료에 용 해된 신진대사물의 농도, pH, 초산측정시 사코진 농도 등에 따 라 고정화된 GOD와 SOD의 활성도, 즉 검출신호의 높이변화를 고찰했다. 최소배양액 과 복합배양액을 사용한 대장균 발효공정 에서 달루코스와 초산을 동시에 온라인 모니터링 하였으며 그결 과는 오프라인 분석결과와 잘 일치 하였다,

  • PDF

Immobilized Luminescent Cell - based Flow Through Monitoring of Environmental Pollutants

  • Britz, Margaret L.;Simonov, Nina;Chun, Uck-Han
    • Journal of Microbiology and Biotechnology
    • /
    • 제7권4호
    • /
    • pp.250-257
    • /
    • 1997
  • A new sensing system based on the immobilization of luminescent bacteria, photobacterium phosphoreum, was proposed for continuous real-time monitoring of pollutants. The response curves demonstrate that Photobacterium phosphoreum immobilized on the strontium alginate were very sensitive to seven reference chemicals used. The significant inhibitory concentrations for bioluminescence emission were 5 ppm for Pb$(NO_3)_2$), $NiCl_2$, $CdCl_2$, 50 ppm for $NaASO_2$, 0.1 ppm for $HgCl_2$, 0.5 ppm for pentachlorophenol and less than 5 ppm for SDS, respectively. The alginate mixed-cells (AMC) retained their luminescence during experimental period (29 days) under storage condition of $-80^{\circ}C$. The variables affecting performance of continuous flow through monitoring (CFTM) was optimized in order to ensure stability and efficiency. The flow through cell with strontium-alginate immobilized luminescent bacteria was tested with salicylate and 4-nitrophenol. A rapid response of luminescence was recorded by time drive mode in bioluminescence spectrometer after exposure to both toxicants.

  • PDF

건천화된 농촌소하천의 시·공간적 수문 수질 특성분석 (Temporal and Spatial Analysis of Hydrology and Water Quality in Small Rural Streams for Stream Depletion Investigation)

  • 이예은;김상민
    • 한국농공학회논문집
    • /
    • 제55권6호
    • /
    • pp.177-186
    • /
    • 2013
  • The purpose of this study was to analyze the temporal and spatial characteristics of the stream flow of small rural streams for investigating the status of stream depletion located downstream of irrigation reservoir. Bonghyun and Hai reservoirs and each downstream were selected for this study. Streamflow was measured for 8 stations downstream from two reservoirs from 2010 to 2012. The water quality samples were collected monthly from the 8 stream stations and 2 reservoir stations from 2011 to 2012. The stream depletion was found in most of the downstream of reservoirs for the non-irrigation period and even in the irrigation period when there were a lot of antecedent precipitation. We found that the stream segments where there were few streamflow, vegetation covers the stream and block the streamflow which makes the stream lost its original function as a stream. Water quality monitoring results of Bonghyun stream indicated that the concentration of SS, Turbidity, TOC, COD were decreased as the stream flows from the reservoir to downstream while the TN and TP were increased. The correlation analysis for water quality data indicated that the correlation between T-N and T-P was high for Bonghyeon and Sukji streams, respectively. Continuous monitoring for rural streams located in downstream of reservoirs are required to quantify the status of stream flow depletion and determine the amount of environmental flows.

CDMA기반 전자부자 흐름 패턴 시스템 설계 및 구현 (A Design and Implementation of CDMA based Electronic Float Flow Pattern System)

  • 김동현;이채석;김종덕
    • 한국정보통신학회논문지
    • /
    • 제16권12호
    • /
    • pp.2619-2627
    • /
    • 2012
  • 전자 부자 흐름 패턴 시스템은 위치 측위 기술과 여러 가지 통신 기술을 이용하여 원격에서 부자의 위치를 모니터링 함으로써 하천의 유량을 예측할 수 있다. 현재 자연하천의 흐름 패턴을 분석하기 위해 여러 형태의 수동 부자들이 사용되고 있다. 수동 부자를 이용한 유량 측정은 유량을 측정하기위해 거리와 시간을 직접 측정한 후 이것을 이용한다. 이러한 방법은 측정방법과 정확한 유량 측정 측면에서 효율적이지 못하다. 이러한 문제를 극복하기 위해 본 연구진은 CDMA, GPS 그리고 2.4GHz기반의 RF모듈을 이용하여 전자부자를 설계 및 구현했다. 그리고 전자부자의 위치정보와 흐름 패턴 정보를 알기 위한 모니터링 시스템을 설계 및 구현하였다. 더불어 배터리로 동작하는 전자부자에서 짧은 life cycle은 전자부자를 이용한 흐름 패턴 시스템에서의 효용성을 떨어뜨린다. 이를 극복하기 위해 전자부자 흐름 패턴 시스템의 전자부자를 위한 전원 절약 기법을 설계하였다.

광학입자센서 내 유동장과 측정영역이 측정효율에 미치는 영향 (Effect of Flow Field and Detection Volume in the Optical Particle Sensor on the Detection Efficiency)

  • 김영길;전기수;김태성
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2007년도 춘계학술대회B
    • /
    • pp.3162-3167
    • /
    • 2007
  • The OPS (Optical Particle Sensor) using light scattering from the particles (real-time measurement without physical contact to the particles) can be used for cleanroom or atmospheric environment monitoring. For particles smaller than 300 nm, the detection efficiency becomes lower as scattered light decreases with particle size. To obtain higher detection efficiency with small particles, the flow field in particle chamber and the detection volume should be designed optimally to achieve maximum scattered light from the particles. In this study, a commercial computational fluid dynamics software FLUENT was used to simulate the gas flow field and particle trajectories with various optical chamber designs for 300 nm PSL particle. For estimation of laser viewing volume, we used a commercial computational optical design program ZEMAX. The results will be a great help in the development of OPS which can measure small particles with higher detection efficiency.

  • PDF