• 한국자동차공학회논문집
• /
• 제11권5호
• /
• pp.29-36
• /
• 2003

Exhaust manifolds suffer from serious temperature variation during the thermal fatigue test. The spatial distribution of temperature changes at each moment. Because transient flow can not be simulated during the long period of temperature change, the simulation can not be performed by conjugate heat transfer analysis. In this study, a new procedure for transient thermal analysis is established by decoupling fluid-solid analysis. The procedure consists of (1) transient CFD calculation (2 cycles), (2) mapping heat transfer coefficient to the inner surface of solid mesh as a boundary condition of heat conduction analysis and (3) transient heat conduction analysis in the long period (30 min). The realistic temperature change can be predicted by this procedure.

• Journal of information and communication convergence engineering
• /
• 제10권3호
• /
• pp.258-263
• /
• 2012

Recently, the magnitude of electronic data interchange (EDI) document processing for the handling of port logistics is abruptly being increased. The existing system processes EDI documents in a script mode, but due to a complicated script preparation procedure and low document processing efficiency, it cannot meet the demand as the usage flow of documents increases. In this paper, an EDI electronic document processing system was designed and implemented in a document scanner and mapper, which are binary form electronic document processing tools and do not require script files during the conversion of extensible markup language (XML)-based electronic documents. This new system has the merits of XML features during reading and writing with improved speed, usage convenience, and good portability on systems when compared to the conventional ones.

• 한국자동차공학회논문집
• /
• 제12권1호
• /
• pp.122-129
• /
• 2004

Finite element analysis was performed to analyze structural safety of a new heavy-duty direct injection diesel engine. A half section of the in-line 6-cylinder engine was selected as a computational domain. A mapping method was used to project heat transfer coefficients from CFD results of engine coolant flow onto the FE model. The accurate setting of thermal boundary condition on the FE model was expected to result in improved prediction of temperature, cylinder bore distortion, and stresses. Characteristics of high cycle fatigue were investigated by assuming the engine was operated under the following five loading conditions repeatedly; assembly force, assembly force with thermal loading, alternating maximum gas pressure loading at each cylinder combined with assembly force and thermal loading. Distribution of fatigue safety factor was calculated by using it Haigh diagram in which the maximum and the minimum stresses were selected from the five loading cases.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2002년도 추계학술대회 논문집
• /
• pp.101-104
• /
• 2002

Simultaneous measurement of turbulent velocity and concentration field in a stirred mixer tank is carried out by using PIV/LIF technique. Instantaneous velocity fields are measured by a $1K\times1K$ CCD camera adopting the frame straddle method while the concentration fields are obtained by measuring the fluorescence intensity of Rhodamine B tracer excited by the second pulse of Nd:Yag laser light. Image distortion due to the camera view-angle is compensated by a mapping function. It is found that the general features of the mixing pattern are quite dependent on the local flow characteristics during the rapid decay of mean concentration. However, the small scale mixing seems to be independent on the local turbulent velocity fluctuation.

• 대한핵의학회지
• /
• 제37권1호
• /
• pp.63-72
• /
• 2003

Functional MRI (fMRI) provides an indirect mapping of cerebral activity, based on the detection of the local blood flow and oxygenation changes following neuronal activity (Blood Oxygenation Level Dependent). fMRI allows us to study noninvasively the normal and pathological aspects of functional cortical organization. Each fMRI study compares two different states of activity. Echo-Planar Imaging is the technique that makes it possible to study the whole brain at a rapid pace. Activation maps are calculated from a statistical analysis of the local signal changes. fMRI is now becoming an essential tool in the neurofunctional evaluation of normal volunteers and many neurological patients as well as the reference method to image normal or pathologic functional brain organization.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2020년도 제62차 하계학술대회논문집 28권2호
• /
• pp.413-414
• /
• 2020

본 논문에서는 수중 문화재를 주제로 오감 인터랙션을 활용한 디지로그 전시 기법을 연구한다. 영상을 활용한 디지털미디어가 중심인 기존의 전시 기법에 시각, 청각, 촉각과 같은 다양한 감각기관을 활용한 인터랙션을 추가함으로써 관람객에게 새로운 경험을 제공하고자 한다. 프로젝션 매핑, 증강현실과 같은 디지털 기술과 난파선과 자갈, 실물 크기의 모형 유물과 같은 아날로그를 결합하여 관람객에게 실재감을 주어 효과적인 몰입감(flow)을 유도하고자 한다.

• 지질공학
• /
• 제22권3호
• /
• pp.283-291
• /
• 2012

국내외적으로 산사태 예측을 위한 다양한 연구가 진행되고 있다. 특히 산사태의 일종인 토석류는 순간적으로 많은 피해를 야기하므로 이에 대한 연구는 방재차원에서 반드시 필요하다. 본 연구에서는 토석류의 흐름이 산지 지형을 따르는 지표수의 흐름과 일치하는 원리를 이용하여 산지 지형에 따른 수계 특성을 파악함으로써 토석류 발생 위험도를 파악하는데 그 목적이 있다. 이를 위해 산사태 및 토석류의 영향을 받는 도심 인근지를 대상으로 지형 특성 및 수계 특성을 분석하기 위해 수치지형도를 활용하여 경사도, 상부사면 기여면적, 습윤지수를 파악하였으며, 지형요소 분석에 의한 산지수계의 집중도를 예측함으로써 지형요소를 고려한 토석류의 위험도 예측이 가능하였다. 또한, 개별요소법을 이용한 토석류 수치해석을 수행하여 연구지역 내 토석류의 무게-충격력 사이의 상관관계식을 도출하였으며, 이를 활용하여 효과적인 토석류 방지구조물의 설치가 기대된다.

• International Journal of Aeronautical and Space Sciences
• /
• 제8권1호
• /
• pp.95-104
• /
• 2007

A new design approach of complex geometries such as wing/body configuration is arranged by using overset mesh techniques under large scale computing environment. For an in-depth study of the flow physics and highly accurate design, several special overlapped structured blocks such as collar grid, tip-cap grid, and etc. which are commonly used in refined drag prediction are adopted to consider the applicability of the present design tools to practical problems. Various pre- and post-processing techniques for overset flow analysis and sensitivity analysis are devised or implemented to resolve overset mesh techniques into the design optimization problem based on Gradient Based Optimization Method (GBOM). In the pre-processing, the convergence characteristics of the flow solver and sensitivity analysis are improved by overlap optimization method. Moreover, a new post-processing method, Spline-Boundary Intersecting Grid (S-BIG) scheme, is proposed by considering the ratio of cell area for more refined prediction of aerodynamic coefficients and efficient evaluation of their sensitivities under parallel computing environment. With respect to the sensitivity analysis, discrete adjoint formulations for overset boundary conditions are derived by a full hand-differentiation. A smooth geometric modification on the overlapped surface boundaries and evaluation of grid sensitivities can be performed by mapping from planform coordinate to the surface meshes with Hicks-Henne function. Careful design works for the drag minimization problems of a transonic wing and a wing/body configuration are performed by using the newly-developed and -applied overset mesh techniques. The results from design applications demonstrate the capability of the present design approach successfully.

• Journal of Acupuncture Research
• /
• 제17권2호
• /
• pp.247-259
• /
• 2000

Objective : The mechanism of acupuncture to increase cerebral blood flow is still uncertain. The purpose of this study was to evaluate the neural basis of acupuncture by comparing the cerebral regions activated by the stimulation of two different methods of acupunctures at the same acupoint which was suggested by oriental medicine to increase rCBF. Materials and Methods : Thirty-nine healthy volunteers(26 males, 13 females, age $31{\pm}11$ years) were studies by rest/acupuncture Tc-99m ECD brain SPECT using a subtraction method. SPECTs using two methods(needle retention and heated needle with 90% alcohol) at two acupoints (right LI. 4 and ST. 36) were peformed at an interval of three days. For the needle retention method, acupuncture needle was inserted to a depth of about 2 cm into each acupoint 8 minutes after the lst acquisition and continued to retain, and the second injection of Tc-99m ECD was done 15 minutes after the insertion of needle. For the heated acupuncture method, heated needle was inserted in a twinkle within several msec 20 second after the second injection of Tc-99m ECD. The differences of between rest and acupuncture activation state were statistically analyzed using a statistical parametric mapping software. Result : Acupunctures of both methods reveal similar patterns of increase in rCBF. Acupuncture at ST.36 increase rGBF in left anterior temporal, right inferior frontal lobes, and left cerebellum. Acupuncture at LI. 4 increase rCBF in the left frontal cortex, right temporal pole, both inferior frontal cortices and right cerebellum. Conclusion : The effects of two different acupunctures to the same acupoints on rCBF were similar. Therefore, this result suggests Chat the mechanism of acupuncture in the increase of cerebral blood flow have a neural basis.

• 암석학회지
• /
• 제25권3호
• /
• pp.283-298
• /
• 2016

천연기념물 제63호로 지정된 산굼부리 분화구은 기존 마르형 분화구로 인식되었지만, 새로운 정밀지질도 작성과 함께 야외에서의 지질학적 특징들이 산굼부리 분화구가 두 번에 걸친 화산활동으로 형성된 함몰분화구(pit crater)임을 지시한다. Stage 1 단계에서는 비현정질휘석현무암 I와 화산재와 래필리로 구성된 화성쇄설물 I가 동시에 형성되었고, stage 2 단계에서는 침상장석감람석현무암 형성 후 비현정질휘석현무암 II와 집괴암으로 구성된 화성쇄설물 II가 동시에 형성되었다. Stage 2의 침상장석감람석현무암을 Ar-Ar 연대측정 결과 산굼부리 함몰분화구는 7만3천 년 전에 형성되었다. 산굼부리 분화구는 함몰분화구(pit crater)임에도 불구하고 현재까지는 하부로 빠져나간 마그마의 방향을 알 수 없다.