• Korean Chemical Engineering Research
• /
• 제57권6호
• /
• pp.868-873
• /
• 2019

본 연구에서는 유기물인 메틸 바이올로겐(methyl viologen, MV)과 템폴(4-hydroxy-TEMPO, TEMPOL)을 활물질로 사용하고 NaCl의 중성 전해질 기반 수계 유기 레독스 흐름전지 성능이 멤브레인에 따라 어떻게 영향을 받는지 분석하였다. 메틸 바이올로겐(MV)과 템폴(TEMPOL)은 중성 전해질인 염화나트륨(NaCl) 전해질에 대해 높은 셀전압(1.37 V)을 얻을 수 있다. 성능 비교를 위해 사용한 멤브레인은 두 가지이다. 첫째로, 상용 양이온 교환막 중 하나인 Nafion 117를 사용하였을 때 성능은 첫번째 사이클에서 충전만 일어났을 뿐 그 후 높은 저항 때문에 완전지가 작동하지 않았다. 하지만 두번째로 사용한 Fumasep 음이온 교환막(FAA-3-50)은 Nafion 117 멤브레인을 사용했을 때와는 다르게 비교적 안정적인 충방전 사이클링을 보였다. 전류 밀도 $40mA{\cdot}cm^{-2}$, 컷-오프 전압 0.55~1.7 V에서 전류 효율(charge efficiency)은 97%, 전압 효율(voltage efficiency)은 78%로 높게 나타났다. 방전 용량(discharge capacity)은 10사이클에서 $1.44Ah{\cdot}L^{-1}$로 이론 용량($2.68Ah{\cdot}L^{-1}$)의 54%를 나타내었다. 방전 용량의 용량 손실율(capacity loss rate)은 $0.0015Ah{\cdot}L^{-1}/cycle$ 로 나타났다. 순환주사전류 실험을 통해 Nafion 117 멤브레인과 Fumasep 음이온 교환막 사이의 이러한 성능차이는 활물질의 크로스 오버(cross over) 현상으로 인한 방전 용량 손실이 아닌 멤브레인과 활물질의 화학적 반응으로 인한 저항 증가가 원인임을 파악할 수 있었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제21권6호
• /
• pp.178-184
• /
• 2017

이 연구에서는 PE 섬유를 사용한 고연성 시멘트 복합체에 대해 최대입경 4.75 mm의 일반모래(강모래)를 규사와 서로 다른 비율로 혼합하여 사용하였을 때, 그에 따른 고연성 시멘트 복합체의 인장거동 변화를 실험을 통해 살펴보고자 하였다. 유동성 평가 실험에서는 강모래 치환율이 증가함에 따라 유동성이 증가하는 것으로 나타났다. 압축강도는 평균압축강도에는 큰 차이가 없었으나, 편차의 크기가 강모래 치환율이 증가할수록 증가하는 것으로 나타났다. 일축인장시험 결과에서는 강모래 치환율에 따른 인장강도의 변화는 거의 없는 것으로 나타났으며, 인장변형률 성능에서는 강모래 치환율이 증가함에 따라 향상되는 결과를 나타내었다. 강모래 치환율이 증가함에 따라 다중균열의 분포밀도가 증가하면서 인장변형률 성능의 향상된 것으로 보인다. 한편, 인장변형률 성능의 편차는 압축강도에서와 마찬가지로 강모래 치환율이 증가함에 따라 커지는 양상을 나타내었다. 이 연구를 통해 규사 대신 일반모래를 사용한 경우에도 고연성 시멘트 복합체의 인장거동의 변동성은 증가하지만, 규사를 사용한 고연성 시멘트 복합체와 비교할 때 등가 이상의 인장성능을 나타낼 수 있음을 확인하였다.

• 청정기술
• /
• 제13권2호
• /
• pp.151-158
• /
• 2007

프레온계 냉매의 지구온난화와 오존층파괴 문제로 인해 대체냉매로서 R-410A가 주목을 받고 있다. 이러한 대체냉매를 세관에 적용시킬 경우 효율을 향상시킬 뿐만 아니라 지구환경에 미치는 영향을 감소시키고, 대기를 청정하게 만드는 기술 및 방안으로 각광 받고 있다. 따라서 본 연구에서는 R-22의 대체냉매로 각광받고 있는 R-410A의 세관응축기 내에서의 응축열전달 특성에 대해 실험적으로 고찰하고자 하였다. 실험장치는 유동양식, 열전달, 압력강하 특성을 파악할 수 있도록 제작되었고, 주요 구성품은 냉매펌프, 증발기, 응축기(시험부), 사이트 글라스(가시화부), 압력탭, 측정장치 등이다. 시험부의 내관은 내경 3.36 mm와 5.35 mm인 수평평활 동관이다. 실험변수들의 범위로서 질량유속 $200{\sim}500\;kg/m^2s$이고, 열유속은 $1.0{\sim}2.4\;kW$이다. R-410A의 응축열전달 계수가 R-22에 비해 최대 5% 정도 높은 것을 알 수 있었다. 세관 내 R-410A와 R-22의 유동양식은 환상류 영역이 지배적으로 나타남을 관찰하였고, 건도가 0.2 이하인 영역에서는 성층류가 나타남을 확인할 수 있었다. 내경 3.36 mm의 압력강하가 내경 5.35 mm에 비해 $30{\sim}50%$정도 높았다. 종래의 응축 열전달 상관식과 실험데이터를 비교한 결과, Fujii의 상관식과 최대 40%이내에서 일치하였다.

• Journal of Plant Biotechnology
• /
• 제6권1호
• /
• pp.25-37
• /
• 2004

Successful genetic transformation of plants requires non-chimeric selection of transformed tissues and their subsequent regeneration. With rare exceptions, most transformation protocols still rely heavily on antibiotics for selecting transgenic cells that contain an antibiotic-degrading selectable marker gene. Here, the morphogenic capacity of in-vitro explants of chrysanthemnum and tobacco stems and leaves (control and transgenic) changed with the addition of aminoglycoside antibiotics (AAs), In a test of 6 AAs, phytotoxicity occurred at concentrations of 10 to 25 and 50 to 100$\mu\textrm{g}$ $mL^{-1}$ in chrysanthemum and tobacco explants, respectively. Light conditions as well as explant source and size also had significant effects. The use of transverse thin cell layers (tTCLs), in conjunction with high initial AA selection levels, supported the greatest regeneration of transgenic material (adventitious shoots or callus) and the lowest number of escapes. Flow-cytometric analyses revealed no endodu-plication in chrysanthemum, even at high AA levels. However, this phenomenon was observed in tobacco calli(8C or more), even at low AA concentrations (i.e., 5 to 10 $\mu\textrm{g}$ mL$^{-1}$ ).

• Journal of Biosystems Engineering
• /
• 제20권3호
• /
• pp.250-261
• /
• 1995

This study has been performed to develop an agricultural waste incinerator to combust the rice hull originated from RPC with the typical disposal treatment capacity of 30kg/h and to test performance of the developed incinerator. Experimental results are summarized as following. 1. The optimum feed rate of rice hull of the incinerator is 30kg/h with air ratio of 1.5. 2. The contents of $SO_2$ in flue gas is maximum 18ppm(when rice hull feed rate was 20kg/h and air ratio of 1.5), minimum 7ppm(when rice hull feed rate was 30kg/h and air ratio of 1.5) and average 11ppm. So there is no environmental pollution problem for the incinerating treatment of rice hull of the RPC. 3. The temperature of water of heat exchanger are $53^{circ} C$ and $62^{circ} C$ with water flow rate $3{ell}/min$ and $1.5{ell}/min$ at the optimum combustion condition, respectively. 4. According to theoretical energy calculation, the energy from rice hull combustion may be amounted as much as 80%~190% of energy supplied by kerosene required by RPC.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1042-1050
• /
• 2008

In this study, SCP method was used by purpose to improve loose sand and soft clay that is drilled Sand Compaction Pile in underground. Settlement behavior of field analyzed through SCP method. When sand Compaction Pile drilled in clay, forming composite ground that foundation and Sand Compaction Pile behavior. According to SCP method can expect bearing capacity improvement, Settlement reduction, lateral flow protection. SCP increase the consolidation settlement of ground and it reduce settlement for that purpose increase liquefaction resistance, lateral Resistance. Because SCP had been widely used for sand. Area of Inchon-A by sand compose clay and silt to upper Ground and compose soft clay to under ground. After pre-loading, it measured settlement by extensometer and settlement extensometer that purpose of ground improvement with 13% in replacement ratio. The result analyzed settlement behavior is similar to Multi-layered Ground that it happened to elastic settlement at upper ground and to consolidation settlement at under ground.

• 설비공학논문집
• /
• 제23권12호
• /
• pp.799-804
• /
• 2011

Radioactivity of high concentrations have existed in the handling nuclear materials in hot cell of PIEF(Post Irradiation Examination Facility). The exhaust filtration system was enabled to process cylindrical filters by using a manipulator in the hot cell. By establishing a double filtration system with two filters, backup protection against leakage or failure of the first is provided by the second filter. Additionally, this a arrangement is arrange intended to increase the total filtration efficiency. The result of the pressure drop changing in the air flow of the cylindrical and HEPA filters is observed by a curved line. A filtering efficiency of more than 99.99% to $0.3{\mu}m$ particle appears in the upstream and downstream during the efficiency test on the HEPA filters. The V-pleats type had a lower pressure drop than the separator type. There was no damage during usage and was found to be suitable with high capacity of air volume. Therefore, by carrying out performance tests of the exhaust filtration system, efficiency and safety can be achieved.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 춘계 학술논문 발표대회 학계
• /
• pp.113-117
• /
• 2009

Fly ash (called FA hereafter) that results from thermal power plants is a long-term strength improving substance with reactivity to pozzolan and has been used for long. However, large amount of FA shows many advantages such as reduction of hydratio energy, long-term improvement in strength and economic feasibility and also has difficulties from reduction in initial strength and durability. In a preceding study, fine particle cement was applied to test the effects on initial strength. Therefore in this study, the effects of fine particle cement on the quality of FA concrete were reviewed. The results can be summarized as follows. Liquidity was increased by the most at FC substitution ratio of 15%. Air capacity was reduced according to increasing substitution ratio of FA and FC. Compressive strength showed high strength expression at all ages when FC was substituted at 45%. Synthesizing the above results, appropriate mixing of FC in FA concrete can improve liquidity, reduce unit quantity and show improvement in strength. In particular, mixed use of FC seems effective in improving early quality of concrete.

• 한국대기환경학회지
• /
• 제32권2호
• /
• pp.176-183
• /
• 2016

Activated carbon fibers (ACFs) for $CO_2$ adsorption were prepared from polyacrylonitrile (PAN) fiber through the systematic processes such as oxidation, activation and amination with the focus on the formation of nitration functional groups. Textural analysis of test samples revealed the decrease of specific surface area and pore volume by chemical activation including amination. The ratio of micropores to the total volume was 0.85 to 0.91, which was high enough with the pore size of 1.57 to 1.77 nm. Nitrogen compounds such as imine, pyridine and pyrrole presenting favorable interforces to $CO_2$ molecules were formed throughout the whole preparation steps. The aminated ACF adsorbent showed the enhanced adsorption capacity, 0.40 mmol/g for low-level $CO_2$ flow (3000 ppm) at room temperature. Selectivity of $CO_2$ against dry air ($O_2$ & $N_2$) also increased from 1.00 to 4.66 by amination.

• Journal of Electrical Engineering and Technology
• /
• 제2권1호
• /
• pp.55-60
• /
• 2007

This paper proposes a hydraulic pump system that uses a variable speed SR drive and constant capacity pump. For the design of the SRM (Switched Reluctance Motor) and digital controller, base speed and rating torque are determined from the mechanical specifications of the hydraulic pump. In order to minimize the power consumption during the maintaining of preset oil-pressure, the pressure control system changes the maximum oil-pressure band and flow rate according to the motor speed. The DSP control system adjusts the oil-pressure and the speed of the SRM from the pressure sensor signal, due to conservation of power consumption by the hydraulic pump. A 2.2Kw, 12/8 pole SR motor and DSP based digital controller are designed and tested with experimental set-up. The test results indicate that the system has some good features such as high efficiency and rapid response characteristics.