• International Journal of Aeronautical and Space Sciences
• /
• v.17 no.3
• /
• pp.315-323
• /
• 2016

This paper deals with experimental investigation of active flow control via synthetic jets using an unmanned combat air vehicle (UCAV) planform. Fourteen arrays of synthetic jets, mounted along both leading edges, were fully or partially activated to increase aerodynamic efficiency and reduce pitch-up moment. The measurements were carried out using a six-component external balance, a pressure scanner, and tuft flow visualization. It was observed that aerodynamic efficiency (L/D) and pitching moment were clearly affected by the location of jets. In particular, inboard and outboard actuation could effectively increase L/D. Moreover, inboard actuation showed a reduction in the pitch-up, even more than that generated by the full actuation. These results suggest that inboard actuation not only effectively increases L/D but also reduces the pitch-up using only a few actuators.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.12
• /
• pp.142-149
• /
• 2002

In this paper, the metal forming process is caused of rise of the unit cost of production in increase of the lead-time and cost because of manufacturing final product through a few the number of processes. Flow control complex forming is proposed to put into formulation in order to apply cold forging from conventional approximate similarity theory, and the forming loads of the real material(AISI 1008) can be calculated by put at the new similarity formula the load by plasticine model material experiment through hub clutch. In order to reduce lead-time and cost the technology is used to manufacture with lower die of this product. By the application synthetic resin as the raw material, it is have the merit such short lead-time, low cost, good surface finish etc., as compared with the machine work.

• 유체기계공업학회:학술대회논문집
• /
• 2001.11a
• /
• pp.419-424
• /
• 2001

TCV(Temperature control valve by pressure compensation) controls temperature constantly, when it is sending steam or high temperature water to heating device of heat exchanger. For designing TCV, the ratio of piston and hole diameters is one of the important design parameters. Numerical analysis is carried out to elucidate the flow characteristics in the TCV with different port areas of cold and hot waters, using the k-$\epsilon$ turbulence model and Cartesian cut-cell method. Numerical results show that the exit flow rate is mainly affected by pressure distribution in the piston.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.10
• /
• pp.579-586
• /
• 1999

This paper describes a simulation model and a scaled hardware model to analyze the dynamic performance of Unified Power Flow Controller, which can flexibly adjust the active power flow through the ac transmission line. The design of control system for UPFC was developed using vector control method. The results of simulation and scaled hardware test show that the developed control system works accurately. Both models would be very effective for analyzing the dynamic performance of the Unified Power Flow Controller.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3004-3006
• /
• 1999

In this paper, we present the ball position and path plain method for the robot-soccer using optical flow. As we compare a optical flow method with a general method within the accurate and effective ball position information of robot-soccer or the path planning, we prove accurate and effective optical flow algorithm to apply ball position and path plain for robot-soccer

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1350-1352
• /
• 1996

The purpose of image sequence coding is to reduce the spatio-temporal redundancies. For the spatial redundancies, we can use the transform coding such as DCT. In this paper, the optical flow method is applied to solve the problem of temporal redundancies. There are several estimation methods like block matching method and pel-recursive method. Block matching method is easy for a hardware implementation because of the computational simplicity. So, it is now used as the estimation method in MPEG-l, MPEG-2, and H.261. We compared the merits and demerits of the optical flow method and the block matching method in this paper.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.574-578
• /
• 2008

In order to achieve thrust vector control and discharge stabilization in Hall thrusters, the azimuthal nonuniformity of propellant flow rate in an acceleration channel was created. A plenum chamber was divided into two rooms by two walls and propellant flow rate supplied to each section was independently controlled. In a magnetic layer type Hall thruster, steering angle of up to ${\pm}2.3$ degree was achieved. In an anode layer type Hall thruster, discharge current oscillation amplitude was decreased with the normalized differential mass flow rate.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.290-293
• /
• 2012

The analysis and performance evaluation of DBD actuator for plasma flow control was described. The experimental apparatus was designed to measure the flow velocity as the discharge conditions, and to find out the optimal discharge condition of the DBD actuator. The average-velocity increased with increasing the discharge voltage. The experimental results was compared with CFD analysis.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.1
• /
• pp.100-107
• /
• 1993

In this study, it is analyzed that an electromagnet whose generating force is proportional to constant current through coil in its coperating range. To find arelation between magnetic force and the structure in electromagnet, computer simulation method is used by permeance modeling method. When the electromagnet is applied to flow control valve, the relation between input current and flow is found. In order to get a reliability of computer simluation, the simulation results are compared to the experimental result. As the simulation is processed repeatedlyl. it is found that the gap size between plunger and guide steel and the length of tapered brass ring are important factors in electromaget.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2B
• /
• pp.250-262
• /
• 2004

In IPv6 environment, the Internet Telephony, VoD(Video on Demand) and high capacity file exchange service will be more increased than IPv4. Therefore, the strict guarantee of QoS based on End-to-End and differentiated quality control schemes are simultaneously required. This paper proposes the flow control schemes on IPv6 network that the traffic is identified by flow and the QoS of multi-service is improved by QoS information in IPv6 hop-by-hop option header. The object of flow control includes not only non-default QoS traffic, which uses the flow label, but also best-effort or encrypted traffic. Therefore, the guarantee of real-time service is strengthened and the flow, which abuses unnecessarily the network resources, is effectively controlled. Also, this paper proposes the mapping scheme between the flow and MPLS by reflecting the minimum change of the existed network resource and the status of backbone network of ISP(Internet Service Provider). In the simulation result, It is shown that the proposed scheme is effective in the side of QoS on real-time services and utilization of backbone resources.