• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.10
• /
• pp.819-825
• /
• 2006

In a SOFC/GT (solid oxide fuel cell/gas turbine) hybrid power generation system, the recuperator is an indispensible component to enhance system performance. Since the expansion ratio to the recuperator core is very large, generally, the effective header design to distribute the flow uniformly before entering the core is crucial to guarantee the required performance. In the present study, we focus on the design of a diffuser type recuperator header with a 90 degree turn inlet port. To reduce the flow separation and recirculation flows, multiple horizontal vanes are used. The number of horizontal vanes is varied from 0 to 24. The air flow velocity is measured at 40 points just behind the core outlet by using a hot wire anemometer. Then, the flow non-uniformity is evaluated from the measured flow velocity. The experimental results showed that inlet air velocity did not effect on relative flow non-uniformity. According to increasing the number of horizontal vanes, flow non-uniformity reduced about $40{\sim}50%$ than without using horizontal vanes.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.7
• /
• pp.111-123
• /
• 2013

To verify software vulnerability, the method of conjecturing software structure and then testing the software based on the conjectured structure has been highlighted. To utilize the method, an efficient way to conjecture software structure is required. The popular graph and tree methods such as DFG(Data Flow Graph), CFG(Control Flow Graph) and CFA(Control Flow Automata) have a serious drawback. That is, they cannot express software in a hierarchical fashion. In this paper, we propose a method to overcome the drawback. The proposed method applies various input data to a binary code, generate CFG's based on the code output and construct a HCFG (Hierarchical Control Flow Graph) to express the generated CFG's in a hierarchical structure. The components required for HCFG and progressive algorithm to construct HCFG are also proposed. The proposed method is verified through constructing the software architecture of an open SMTP(Simple Mail Transfer Protocol) server program. The structure generated by the proposed method and the real program structure are compared and analyzed.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.11a
• /
• pp.170-176
• /
• 2009

Flow control butterfly valve(FCBV) is known to have difficulty in controlling flow rate along valve opening due to its high flow rate. In low opening condition, the butterfly valve also has some shortcomings such as noise, vibration and erosion which are mostly caused by cavitation effects. Therefore, the FCBV requires proper remedies to reduce cavitation effects and to improve flow control performance. Numerical analysis is applied to FCBV flow to find effects of design factors such as seat diameter and valve opening rate. Cases with 3 different sizes of seat diameter and various valve opening rate are selected for the numerical analysis. From the analysis results, it is found that the FCBV with small seat diameter shows better pressure loss performance and reduced cavitation effects.

• Journal of computational fluids engineering
• /
• v.15 no.1
• /
• pp.64-70
• /
• 2010

Flow control butterfly valve(FCBV) is known to have difficulty in controlling flow rate along valve opening due to its high flow rate. In low opening condition, the butterfly valve also has some shortcomings such as noise, vibration and erosion which are mostly caused by cavitation effects. Therefore, the FCBV requires proper remedies to reduce cavitation effects and to improve flow control performance. Numerical analysis is applied to FCBV flow to find effects of design factors such as seat diameter and valve opening rate. Cases with 3 different sizes of seat diameter and various valve opening rate are selected for the numerical analysis. From the analysis results, it is found that the FCBV with small seat diameter shows better pressure loss performance and reduced cavitation effects.

• ETRI Journal
• /
• v.26 no.4
• /
• pp.351-359
• /
• 2004

Flow aggregation is a scalable method to provide quality of service (QoS) guarantees to a large number of flows economically. A round-robin scheduler is an efficient scheduling algorithm. We investigate flow aggregation using a round-robin scheduler and propose the use of periodic timer interrupts for rate control of the round-robin scheduler. The proposed flow aggregator is a single-stage scheduler compared to Cobb's two-stage flow aggregator consisting of an aggregator and non-aggregating scheduler. It is possible to implement flow aggregation in the existing routers with only a software upgrade. We also present a simulation study showing the delay behaviors of the proposed algorithm.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.371-375
• /
• 2009

The distribution control of refrigerant flow is one of the basic technique to enhance system efficiency. However, if engineers forget to control the refrigerant flow speed in all operation range, refrigerant flow mal distribution becomes a noise source. The refrigerant flow noise should be checked and controlled at the lowest air flow mode which is the most silent mode and frequently used in night time.

• Journal of Biomedical Engineering Research
• /
• v.42 no.4
• /
• pp.193-200
• /
• 2021

Flowmeter and oxygen sensors are listed in COVID-19 essential medical devices. This article reports a Teensy microcontroller-based Oxygen mass flow controller (MFC), core part of the oxygen respirator or extracorporeal membrane oxygenation (ECMO). The developed MFC consisting of the microcontroller, MEMS flow sensor, and solenoid valve was able to accurately control 0 to 100 sccm of oxygen flow rate. The pressure of vacuum chamber increased proportionally to the flow rate (0.998 of Pearson correlation coefficient). The experimental results proved that the developed MFC exhibits comparable performance to a commercial MFC in accuracy, settling time, linearity with pressure, and repeatability of oxygen mass flow control. It is expected that this simple and cheap MFC is utilized for oxygen therapy against the severe acute respiratory syndrome coronavirus 2.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.23 no.6
• /
• pp.1491-1496
• /
• 2009

Stroke is usually associated with the cerebral blood flow of the central nervous system. However, studies concerning the effects of neurologic sysmptoms induced from stroke on the peripheral blood flow has not taken place sufficiently. To ascertain the feasibility of a blood flow meter adopting to use doppler ultrasonogrphy, under the prospect that hemiparesis induced from stroke may have effect on the peripheral blood flow, the peripheral blood flow velocity was observed. The control group made up of healthy people without any factors capable of effecting the peripheral blood flow velocity, and patient group which consist of hemiparetic people induced from stroke, were recruited. Volumes of recruitment are 21 persons in the patient group, and 29 persons in the control group, but the final numbers of people are 17 and 21 respectively because of the inconsistancy in the method of the test. The non-invasive method of Doppler effect of Ultrasound was used to measure the blood flow velocity. The blood flow velocity in the peripheral part of left and right fourth fingers:dorsal branches of proper palmar digital artery to dorsum of distal phalanges, was measured in the control group and patient group through Doppler Ultrasound. In comparison of the control group and the patient group, the systolic blood flow velocity from the peripheral part of the upper extremity was lower in the patient group than that of the control group. According to such results, it is concluded that hemiparesis induces the reduction of the peripheral blood flow velocity in the systolic phase.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.7
• /
• pp.608-615
• /
• 2012

In this study, we analyzed the system impedance of Unmanned Aerial Vehicle avionics bay and Environmental Control System(ECS), and estimated the proper air flow rate to be supplied avionics equipments. As the result of estimation, we evaluated the performance of ECS after analysing the flow balance rate and the air flow rate about each outlet port, and simultaneously decided the flow balance rate after evaluating the thermal substantiality by the thermal analysis of avionics bay. In order to verify the property of analysis result, we conducted the flow balance test using the actual avionics equipments and finally deduced the flow rate to be met system requirements of avionics equipments. Also, as the analysis results, we verified the satisfaction of system requirements at midium altitude condition and proved the performance characteristics of an Environmental Control System(ECS).

• Journal of Korea Game Society
• /
• v.17 no.5
• /
• pp.81-88
• /
• 2017

In this study, the influence of player motivations in FPS(First Person Shooter) online game on flow, consumer satisfaction and loyalty was analyzed. Research results show that player motivations can be classified into five factors: control, relationship, boasting, de-stress, and interest. The most influential factor that affects flow is interest, and control, relationship, and de-stress are following. In terms of consumer satisfaction, relationship, interest, and control are most positive factors. When it comes to consumer loyalty, relationship, control, and interest are most positive factors. Flow has a strongly positive influence on both consumer satisfaction and loyalty.