• 천문학논총
• /
• 제39권1호
• /
• pp.1-12
• /
• 2024

In this study, we investigated the time signal devices of Deungnu (circa 1270) and Gungnu (1354), the water clocks produced during the Yuan Dynasty (1271-1368). These clocks influenced Heumgyeonggaknu (1438) of the Joseon Dynasty (1392-1910), exemplifying the automatic water clocks of the Yuan Dynasty. Deungnu, Gungnu, and Heumgyeonggaknu can be considered as automatic mechanical clocks capable of performances. The Jega-Yeoksang-Jip (Collection of Calendrical and Astronomical Theories of Various Chinese Masters) contains records of Deungnu extracted from the History of the Yuan Dynasty. We interpreted these records and analyzed reproduction models and technical data previously produced in China. The time signal device of Deungnu featured a four-story structure, with the top floor displaying the four divine constellations, the third floor showcasing models of these divinities, the second floor holding 12-h jacks and a 100-Mark ring, and the first floor with four musicians and a 100-Mark Time-Signal Puppet providing a variety of visual attractions. We developed a 3D model of Deungnu, proposing two possible mechanical devices to ensure that the Time-Signal Puppet simultaneously pointed to the 100-Mark graduations in the east, west, south, and north windows: one model reduced the rotation ratio of the 100-Mark ring to 1/4, whereas the other model maintained the rotation ratio using four separate 100-Mark rings. The power system of Deungnu was influenced by Suunuisangdae (the water-driven astronomical clock tower) of the Northern Song Dynasty (960-1127); this method was also applied to Heumgyeonggaknu in the Joseon Dynasty. In conclusion, these automatic water clocks of East Asia from the 13th to 15th centuries symbolized creativity and excellence, representing scientific devices that were the epitome of clock-making technology in their times.

• 한국정보통신학회논문지
• /
• 제19권10호
• /
• pp.2321-2330
• /
• 2015

실내에서 무용지물이 되는 GPS 의 한계로 다양한 실내 측위 기술에 대한 연구가 진행되고 있으나 대부분 사설 무선 네트워크 기반의 실내 측위 방법들로 고가의 설치 및 유지보수 비용, 비실시간성, 그리고 낮은 정확도 때문에 상용화가 어려운 실정이다. 본 논문에서는 기존에 증강현실에 사용되던 마크 인식 알고리즘을 최초로 차량용 실내 측위분야에 적용하였다. 지면에 플로어 마크를 설치하고 마크의 투영 변환 및 정보 디코딩을 통해 마크 내부의 정보(절대 좌표)를 인식하고 기하학적 분석을 통해 차량이 마크로부터 떨어진 정밀한 위치와 접근 방향(상대 좌표)를 인지할 수 있도록 하였다. 실험 결과 5m 단위로 마크를 설치했을 때 약 30 cm 이내의 오차만 발생하였고, 20km/h 의 속도에서 초당 20 프레임의 이미지 중 43.2% 의 마크 인식률을 보여 충분히 상용화 가치가 있음을 확인하였다.

• 국제초고층학회논문집
• /
• 제7권4호
• /
• pp.397-408
• /
• 2018

In a recent tragic fire incident, the Plasco Tower collapsed after an intense outburst of fire lasting for three and a half hours and claiming the lives of 16 firefighters and 6 civilians. This paper will present continuing collaborative work between Hong Kong Polytechnic University and Queen's University in Canada to model the progressive collapse of the tower. The fire started at the 10th floor and was observed to have travelled along the floor horizontally and through the staircase and windows vertically. Plasco Tower was steel structure and all the steel sections were fabricated by welding standard European channel or angle profiles and no fire protection was applied. Four internal columns carried the loads transferred by the primary beams, and box columns were constructed along the perimeter of the building as a braced tube for resisting seismic loading. OpenSees fibre-based sections and displacement-based beam-column elements are used to model the frames, while shell elements are used for the reinforced concrete floor slabs. The thermal properties and elevated temperature mechanical properties are as recommended in the Eurocodes. The results in this preliminarily analysis are based on rough estimations of the structure's configuration. The ongoing work looks at modeling the Plasco Tower based on the most accurate findings from reviewing many photographs and collected data.

• 한국화재소방학회논문지
• /
• 제31권1호
• /
• pp.89-97
• /
• 2017

본 연구에서는 서비스센터에서 정비를 받고 출고한 날로부터 5일 후 터널 주행 중에 발생한 디젤승용차 화재 사례를 조사분석하였다. 조사분석한 결과, 배기구 내부에 흰색 이물질이 다량 부착되어 있었고, 배기관의 중간에 설치된 diesel particulate filter (DPF) 위쪽의 차열재가 용융 및 소실되어 있었고, DPF 위쪽의 차실 내부 금속재 바닥이 천공되어 금속재 바닥 위에 놓인 고무매트가 연소된 케이스이었다. 그리고 DPF 앞쪽의 배기관에는 과열흔적이 없고 DPF부터 배기구까지의 배기관에 과열흔적이 있는 특이점이 있었다. 이러한 특이점들은 DPF가 과열되고 DPF에서 발화된 경우에만 나타나므로 이 승용차화재는 DPF 내부 과열에 의해 발생한 것으로 분석할 수 있었다. 그리고 이 승용차화재조사를 통해 디젤승용차 화재원인조사 과정에서 배기구 내부에서 흰색 이물질이 확인되는 경우에는 DPF를 분리하여 DPF 내부의 손상을 조사하여 화재원인을 판정하여야 함을 알 수 있었다.

• 건축역사연구
• /
• 제14권4호
• /
• pp.73-86
• /
• 2005

The purpose of this study is to prove the correlations among various factors what determined to formation of front elevation proportion system through making an actual survey and investigating. According to the analysis of them, we make conclusions as follows; 1, On the assumption that average distance of 1Kan(間) is 1, the height of foundation is 0.21, the height of floor from foundation is 0.24, the height of normal column from floor is 0.85, the height of eaves from foundation is 1.10. 2. Southeast faced buildings are wider than southwest faced buildings in the distance of 1Kan (間) in the range of $110{sim}220mm$. The height of foundation and floor in the southeast faced buildings are higher than those in southwest faced buildings beside the height of normal column, eaves, high column in the southwest faced buildings are higher than those in southeast faced buildings. 3. As number of front Kan(間) increases, the distance of 1Kan(間) decrease and the height of eaves and high column(高柱) increases. This is cause of making a maximum needed inner space by increasing the distance of 1Kan(間). This is an wisdom for living from ancestors. 4. As number of Dori(道里) increases, the distances of 1Kan are nearly same but the height of eaves and high column(高柱) increases about 300mm, This is a natural result from an increasing of building scale. 5. The distance of 1Kan(間) in later 19C building is most wide but, the unit heights are minimal average values at year 1900 as a reference mark. After this, the height of normal column, eaves, high column are higher about $170{sim}330mm$. 6. The number of Kan in front elevation, Dori(道里), and direction of building have correlations each other in proportion system of traditional housing An-Chae with significant level, p<0.05.

• 대한인간공학회지
• /
• 제20권1호
• /
• pp.15-29
• /
• 2001

This study was conducted to develop a prototype of adjustable desk and chair for students from elementary to high school. The development process started with identifying the problems of existing adjustable desks and chairs that are currently available in the market. The following fundamental design criteria were established and then applied to develop the prototype. The criterion of minimization of production cost yielding lower the market selling price was the most critically considered in view of the school furniture buyers' price-consciousness. Other design criteria used in this development were designing for stable and solid structure, requiring few motions and no tools to adjust, requiring the use of only one hand to adjust, unrestricting the adjustable interval, providing extra space for foot and knee area, reducing weight to move easily, and requiring not to move around for cleaning up floor. To evaluate the performance of the prototype, the adjustability of prototype was specifically compared with both dimensions suggested by KS G 2010(Korean Standards for desks and chairs for students) and current anthropometric dimension in terms of the flexible range of accommodation. Results of this study illustrate that the prototype developed in this study could be accommodated for the both dimensions. As a concluding mark, appropriate adjustable range for various grades and age groups were presented.

• Journal of Astronomy and Space Sciences
• /
• 제40권4호
• /
• pp.131-148
• /
• 2023

Lunar permanently shadowed regions (PSRs) never see direct sunlight and are illuminated only by secondary illumination - light reflected from nearby topography. The ShadowCam imaging experiment onboard the Korea Pathfinder Lunar Orbiter is acquiring images of these PSRs. We characterize and discuss the nature of secondary illumination for the Shackleton PSR from ShadowCam radiance-calibrated images. We also use modeling to understand the magnitude and direction of the secondary illumination. Results from our analysis highlight the non-homogeneous, dynamic, and complex nature of PSR secondary lighting. Knowledge of the direction of the secondary illumination is crucial for reli-able interpretation of contrasts observed in ShadowCam images. This preliminary analysis of the floor of Shackleton crater from images acquired over multiple secondary illumination conditions does not reveal indications of exposed surface ice, even though temperatures are constantly below 110K.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2007년도 학술논문요약집
• /
• pp.190-191
• /
• 2007

Cleanout of the F Reactor Fuel Storage Basin (FSB) is an element of the FSB decontamination and decommissioning (D&D) and is required to complete interim safe storage (ISS) of the F Reactor. Following reactor shutdown and in preparation for a deactivation layaway action in 1970, the water level in the FReactor FSB was reduced to approximately 0.6 m (2 ft) over t]to floor. Basin components and other miscellaneous items were left or placed in the FSB. The item placement was performed with a sense of finality, and no attempt was made to place the items in an orderly manner. The F Reactor FSB was then filled to grade level with 6(20of local surface material (essentially a fine sand). The reactor FSB backfill cleanout has the potential of having to remove spent nuclear fuel (SNF) that may have been left unintentionally. Based on previous cleanout of six water-filled FSBs with similar designs (i.e., the B, C, D, and DR FSBs in the 1980's), it was estimated that up to five SNF elements could be discovered in the F FSB (I). In reality about 17 full SNF elements were found in the excavation. This paper covers the technical and programmatic challenges of performing this decommissioning effort with some of the controls used for SNF management. The paper also will highlight how many various technologies were married into a complete package to address the issue at hand and show how no one tools could complete the job, but combined, good progress is being made.

• 한국석유지질학회지
• /
• 제10권1_2호
• /
• pp.18-22
• /
• 2004

한국해양연구원에서는 1996년 이래로 동해 울릉분지에서 가스 하이드레이트층의 부존 확인과 특성을 규명하기 위하여 다중채널 반사파 탐사, 고해상 천부지층 탐사, SeaBeam 등의 지구물리 자료와 12 m 길이의 시추퇴적물 시료들을 획득하였다. 동해 울릉분지 남부 해역에는 대규모 천부 가스층이 배태되어 있는데 고해상 천부 탄성파자료에 나타나는 음향이상인 음향 공백상, 음향 혼탁상 그리고 포크마크 등으로 확인할 수 있다. 이 해역에서 채취된 시추 퇴적물들은 대기 하에서 가스팽창으로 야기된 균열조직을 보이는데, 이는 퇴적물 내 가스함유를 지시한다. 이 시추 퇴적물들은 저해수면 시기에 가스 하이드레이트 해리로 인하여 생성된 사면사태에 의해서 공급된 쇄설류와 질량류 퇴적물들로 구성되어 있다. 탄성파 단면도 상에서는 해저면 모방 반사면 (BSR), 진폭 공백 및 위상 반전 현상 등이 특징적으로 나타난다. 가스 하이드레이트층은 수심 2,100 m 정도에서 해저면하 약 200 m의 깊이에 위치하며 BSR 상부에는 대규모 천부가스가 존재한다. 탄성파 자료 해석에 의하면 가스 하이드레이트층은 시대적으로 플라이스토세와 홀로세층 사이에 존재한다. 이와 같이 울릉분지 남부 해역에서 관찰되는 가스함유 퇴적물, 음향이상, BSR등은 가스 하이드레이트층의 부존 특성을 보여주고 있다.