• 한국구조물진단유지관리공학회 논문집
• /
• 제5권2호
• /
• pp.183-190
• /
• 2001

A sub-structure is uplift if the floating greater than dead load of a structure. When such occasion arise, a structure sustain damage. In general, the measures for floating prevention of structure are a permanent anchor method and a drainage method. The primary construction cost of a permanent anchor method is heavy. And a drainage method is needed maintenance management long term. At this point, the measures for floating prevention of a notion being requires the other days. Therefore, at this study a simple construction and a economic vertical drainage system was developed. The findings be used in the in-situ and gave careful consideration to an application. The result of examination, this system considering a characteristic of coefficient of permeability for the ground controls occurrence of floating despite the water level rise of the ground, which a period of construction get shorter compared with other methods, which understood that measures satisfactory in the financial aspect. Especially, A structure occurring effects of flatting under the course of construction made use of it. As the result of the effect of it was confirmed by construction.

• 국제강구조저널
• /
• 제18권4호
• /
• pp.1191-1199
• /
• 2018

Concepts of submerged floating tunnels (SFTs) for land connection have been continuously suggested and developed by several researchers and institutes. To maintain their predefined positions under various dynamic environmental loading conditions, the submerged floating tunnels should be effectively moored by reasonable mooring systems. With rational mooring systems, the design of SFTs should be confirmed to satisfy the structural safety, fatigue, and operability design criteria related to tunnel motion, internal forces, structural stresses, and the fatigue life of the main structural members. This paper presents a feasibility study of a submerged floating tunnel moored by an inclined tendon system. The basic structural concept was developed based on the concept of conventional cable-stayed bridges to minimize the seabed excavation, penetration, and anchoring work by applying tower-inclined tendon systems instead of conventional tendons with individual seabed anchors. To evaluate the structural performance of the new type of SFT, a hydrodynamic analysis was performed in the time domain using the commercial nonlinear finite element code ABAQUS-AQUA. For the main dynamic environmental loading condition, an irregular wave load was examined. A JONSWAP wave spectrum was used to generate a time-series wave-induced hydrodynamic load considering the specific significant wave height and peak period for predetermined wave conditions. By performing a time-domain hydrodynamic analysis on the submerged floating structure under irregular waves, the motional characteristics, structural stresses, and fatigue damage of the floating tunnel and mooring members were analyzed to evaluate the structural safety and fatigue performance. According to the analytical study, the suggested conceptual model for SFTs shows very good hydrodynamic structural performance. It can be concluded that the concept can be considered as a reasonable structural type of SFT.

• 한국산학기술학회논문지
• /
• 제14권10호
• /
• pp.5281-5289
• /
• 2013

이 연구는 플로팅 건축과 관련된 각종 기준과 플로팅 주거건축 사례에서 확인할 수 있는 플로팅 주거건축의 주요 건축 계획 항목을 정리하고자 하였다. 미국과 캐나다, 네델란드, 일본에서 작성된 총 6종의 관련 기준과 미국과 캐나다, 네델란드의 플로팅 주거건축 사례를 총 14개 사례로 나누어 분석하였다. 이와 같은 분석을 통해 도출된 플로팅 주거건축의 주요 건축 계획 항목은 첫째, 육상과 연결되는 진입로 및 주거단지의 공용 통로 계획, 둘째, 공동으로 사용하는 주차장, 창고 등을 포함한 각종 편의 시설과 공용 공간 계획, 셋째, 방화 및 안전 장비의 설치와 불연 재료 및 난연 재료의 사용, 단지 규모에 따른 소방 설비 계획, 넷째, 단위 모듈러 주택의 제작 장소, 운송 방법, 시공 방법 등과 같은 모듈러 건축 시스템 적용 계획으로 정리할 수 있다.

• 도시과학
• /
• 제10권1호
• /
• pp.29-37
• /
• 2021

The number of old buildings older than 30 years in Korea continues to increase from 29.9% in 2005 to 38.8% in 2020. Considering the growing urban regeneration projects, urban maintenance projects, the suppression of urban expansion, and the lack of idle land in the city, the dismantling of old buildings is expected to increase further in the future. As major accidents at building dismantling sites continue to occur, related agencies are also strengthening safety management of building dismantling works. While physical safety management such as collapse and fall is strengthened, there is a relative lack of interest in the health of workers at dismantling sites due to environmental hazards. Since relevant laws stipulate that construction waste should be separated and discharged, old buildings need to be considered for environmental hazards such as fine dust, floating bacteria, and floating molds when dismantling. In this study, we intend to find important safety management elements in the management of building dismantling sites, measure environmental factors harmful to dismantling workers, and present basic data for the management of dismantling sites in the future. "Safety management" was the highest priority, followed by "dust," "vibration," "noise," "bacteria," and "smell." The perception of the importance of "physical damage prevention" with workers working on dismantling and managers managing the site came out similar, but the perception of "work efficiency" and "health disorder prevention" through environmental hazard management showed different priorities. In the process of dismantling, floating bacteria and floating mold were collected, cultured, and measured the concentration in the indoor air. The measurement was measured by dividing it into pre-dismantling and during dismantling.

• 한국강구조학회 논문집
• /
• 제29권6호
• /
• pp.401-410
• /
• 2017

본 연구에서는 긴장재로 계류된 해중 터널에서 긴장재의 느슨해짐에 따른 동적 불안정 거동에 대해 다룬다. 해중 터널의 설계는 파랑 및 조류 등 유체력에 의해 지배받는다. 특히 시간에 따라 지속적으로 크기 및 작용방향이 변하는 파랑은 해중 터널의 동적 거동을 직접적으로 야기하게 되는데, 파랑에 의한 부유 튜브의 운동은 계류선 내력의 동적 변동을 유발하게 되고, 이 힘의 변화는 계류선의 강도설계 뿐 만 아니라 피로 설계에도 직접적인 영향을 미친다. 파랑에 의한 터널의 운동이 극심할 경우, 계류선의 장력은 모두 소실될 수 있는데, 이 때 계류선이 느슨해짐에 따라 일시적으로 부유 터널의 운동에 대한 저항성이 사라져 동적 불안정 거동이 유발 될 수 있다. 이에 본 연구에서는 유체-구조동역학 해석기법을 통해 해중 터널 긴장재의 느슨해짐 발생 시 부유 튜브의 동적 불안정 거동에 대해 분석하였다. 특히 해중터널의 중요 설계 인자인 흘수, 부력-자중 비율(Buoyancy-Weight Ratio, BWR), 긴장재 기울임이 동적 불안정 거동에 미치는 영향에 대해 분석하였다.

• 한국해양환경ㆍ에너지학회지
• /
• 제4권2호
• /
• pp.61-67
• /
• 2001

해양으로 유입하는 부유쓰레기를 하천에서 차단하는 시스템의 개발에 관해 소개한다. 차단막 시스템은 육상쓰레기에 기인하는 연안역의 해양오염을 방지하기 위한 목적으로 개발되었다. 시스템은 차단막, 계류시스템, 차단막 감는장치로 구성된다. 차단막은 판스프링에 의한 자동 팽창식으로 설계되었으며, 부유쓰레기를 수거하는 콘베이어시스템으로 이송시키는 기능을 한다. 차단막 시스템의 설계기준을 정립하기 위하여, 설계인자들을 고찰하였다. 정립된 설계기준에 기초하여, 차단막 시스템의 시제품이 제작되었으며, 한강의 탄천에서 성능을 시험하였다. 성능시험 곁과는 개발된 차단막 시스템이 효과적으로 하천의 부유쓰레기를 수거할 수 있음을 나타낸다.

• 한국물환경학회지
• /
• 제22권6호
• /
• pp.1038-1044
• /
• 2006

The floating island was investigated in order to make a purification of lake water quality with the uptake of nutrients, the prevention of algae growth and the supply of habitat for aquatic plants. Although the concentrations of organics and nutrients inside facility were shown higher than outside, the quantitative analysis was not attainable. Nitrogen uptakes by Cattail, Phragmites japonica, Reed and Wild rice were shown 48.2, 98.0, 111.1 and $72.0g/m^2{\cdot}year$, respectively, and in the case of phosphorus they were 3.2, 8.3, 6.1 and $4.6g/m^2{\cdot}year$, respectively. Considering total floating areas of $2,560m^2$, the nitrogen uptake is totally estimated to $210.7kg/m^2{\cdot}year$ and $14.2kg/m^2{\cdot}year$ for the phosphorus uptake. In order to promote the spread of floating island, the selection of aquatic plants, the control of growth rate properly and the method of quantitative analysis for the purification of water quality and the application to the stream water should be thoroughly surveyed from all angles prior to the application.

• Geomechanics and Engineering
• /
• 제33권1호
• /
• pp.101-112
• /
• 2023

When a submerged floating tunnel is connected to the ground, there is a risk of stress concentration at the shore connection owing to the displacement imbalance caused by low confinement pressures in water and high confinement pressures in the ground. Here, the effects of the boundary condition and stiffness of the joints installed at the shore connection on the behaviors of a submerged floating tunnel and its shore connection were analyzed using a numerical method. The analysis results obtained with fixed and ground boundaries were similar due to the high stiffness of the ground boundary. However, the stability of the shore connection was found to be improved with the ground boundary as a small displacement was allowed at the boundary. The effect of the joint stiffness was evaluated by investigating the dynamic behavior of the submerged floating tunnel, the magnitude of the load acting on the bored tunnel, and the stress distribution at the shore connection. A lower joint stiffness was found to correspond to more effective relief of the stress concentration at the shore connection. However, it was confirmed that joints with low stiffness also increase the submerged floating tunnel displacement and decrease the frequency of the dynamic behavior, causing a risk of increased resonance when wave loads with low frequency are applied. Therefore, it is necessary to derive the optimal joint stiffness that can achieve both stress concentration relief and resonance prevention during the design of shore connections to secure their dynamic stability.

• 한국연안방재학회지
• /
• 제1권4호
• /
• pp.149-155
• /
• 2014

Flexible risers have been used extensively in recent years for floating and early production systems. Such risers offer the advantage of having inherent heave compliance in their catenary thereby greatly reducing the complexity of the riser-to-rig and riser-to subsea interfaces. Another advantage with flexible risers is their greater reliability. Concerns about fatigue life, gas permeation and pigging of lines have been overcome by extensive experience with these risers in production applications. In this paper, flexible riser analysis results were compared through coupled and uncoupled dynamic analyses methods. A time domain coupled analysis capability has been developed to model the dynamic responses of an integrated floating system incorporating the interactions between vessel, moorings and risers in a marine environment. For this study, SPM (Single Point Mooring) system for an FSU in shallow water was considered. This optimization model was integrated with a time-domain global motion analysis to assess both stability and design constraints of the flexible riser system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.165-168
• /
• 2001

This paper presents a design of a divide unit supporting IEEE-754 floating point standard single-precision with 32-bit word length. Its functions have been verified with ALTERA MAX PLUS II tool. For a high-speed division operation, the radix-4 non-restoring algorithm has been applied and CLA(carry-look -ahead) adders has been used in order to improve the area efficiency and the speed of performance for the fraction division part. The prevention of the speed decrement of operations due to clocking has been achieved by taking advantage of combinational logic. A quotient select block which is very complicated and significant in the high-radix part was designed by using P-D plot in order to select the fast and accurate quotient. Also, we designed all division steps with Gate-level which visualize the operations and delay time.