• Journal of the Korea institute for structural maintenance and inspection
• /
• v.5 no.2
• /
• pp.183-190
• /
• 2001

A sub-structure is uplift if the floating greater than dead load of a structure. When such occasion arise, a structure sustain damage. In general, the measures for floating prevention of structure are a permanent anchor method and a drainage method. The primary construction cost of a permanent anchor method is heavy. And a drainage method is needed maintenance management long term. At this point, the measures for floating prevention of a notion being requires the other days. Therefore, at this study a simple construction and a economic vertical drainage system was developed. The findings be used in the in-situ and gave careful consideration to an application. The result of examination, this system considering a characteristic of coefficient of permeability for the ground controls occurrence of floating despite the water level rise of the ground, which a period of construction get shorter compared with other methods, which understood that measures satisfactory in the financial aspect. Especially, A structure occurring effects of flatting under the course of construction made use of it. As the result of the effect of it was confirmed by construction.

• International journal of steel structures
• /
• v.18 no.4
• /
• pp.1191-1199
• /
• 2018

Concepts of submerged floating tunnels (SFTs) for land connection have been continuously suggested and developed by several researchers and institutes. To maintain their predefined positions under various dynamic environmental loading conditions, the submerged floating tunnels should be effectively moored by reasonable mooring systems. With rational mooring systems, the design of SFTs should be confirmed to satisfy the structural safety, fatigue, and operability design criteria related to tunnel motion, internal forces, structural stresses, and the fatigue life of the main structural members. This paper presents a feasibility study of a submerged floating tunnel moored by an inclined tendon system. The basic structural concept was developed based on the concept of conventional cable-stayed bridges to minimize the seabed excavation, penetration, and anchoring work by applying tower-inclined tendon systems instead of conventional tendons with individual seabed anchors. To evaluate the structural performance of the new type of SFT, a hydrodynamic analysis was performed in the time domain using the commercial nonlinear finite element code ABAQUS-AQUA. For the main dynamic environmental loading condition, an irregular wave load was examined. A JONSWAP wave spectrum was used to generate a time-series wave-induced hydrodynamic load considering the specific significant wave height and peak period for predetermined wave conditions. By performing a time-domain hydrodynamic analysis on the submerged floating structure under irregular waves, the motional characteristics, structural stresses, and fatigue damage of the floating tunnel and mooring members were analyzed to evaluate the structural safety and fatigue performance. According to the analytical study, the suggested conceptual model for SFTs shows very good hydrodynamic structural performance. It can be concluded that the concept can be considered as a reasonable structural type of SFT.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.5281-5289
• /
• 2013

This study aims to identify the key points of architectural planning for floating residential architecture. For this purpose, this study analyses 6 kinds of standards about floating architecture and 14 cases of floating residential architecture. As a result, this study finds out 4 points of architectural planning for floating residential architecture; first, planning of access to upland and walkway, second, public facilities and community space planning, third, planning of various equipment, material and fixed extinguishing system for fire prevention, forth, modular system planning including manufacturing, transporting and installation of modular house.

• Journal of Urban Science
• /
• v.10 no.1
• /
• pp.29-37
• /
• 2021

The number of old buildings older than 30 years in Korea continues to increase from 29.9% in 2005 to 38.8% in 2020. Considering the growing urban regeneration projects, urban maintenance projects, the suppression of urban expansion, and the lack of idle land in the city, the dismantling of old buildings is expected to increase further in the future. As major accidents at building dismantling sites continue to occur, related agencies are also strengthening safety management of building dismantling works. While physical safety management such as collapse and fall is strengthened, there is a relative lack of interest in the health of workers at dismantling sites due to environmental hazards. Since relevant laws stipulate that construction waste should be separated and discharged, old buildings need to be considered for environmental hazards such as fine dust, floating bacteria, and floating molds when dismantling. In this study, we intend to find important safety management elements in the management of building dismantling sites, measure environmental factors harmful to dismantling workers, and present basic data for the management of dismantling sites in the future. "Safety management" was the highest priority, followed by "dust," "vibration," "noise," "bacteria," and "smell." The perception of the importance of "physical damage prevention" with workers working on dismantling and managers managing the site came out similar, but the perception of "work efficiency" and "health disorder prevention" through environmental hazard management showed different priorities. In the process of dismantling, floating bacteria and floating mold were collected, cultured, and measured the concentration in the indoor air. The measurement was measured by dividing it into pre-dismantling and during dismantling.

• Journal of Korean Society of Steel Construction
• /
• v.29 no.6
• /
• pp.401-410
• /
• 2017

This study deals with dynamic instability of a tendon moored submerged floating tunnel (SFT) due to tendon slack. In general, environmental loadings such as wave and current govern SFT design. Especially, the wave force, whose amplitude and direction continuously change, directly induces the dynamic behavior of the SFT. The motion of the floating tube, induced by the wave force, leads dynamic response of the attached tendons and the dynamic change of internal forces of the tendons significantly affects to the fatigue design as well as the structural strength design. When the severe motion of the SFT occurs due to significant waves, tendons might lose their tension and slack so that the floating tube can be transiently instable. In this study, the characteristics of dynamic instability of the SFT due to tendon slack are investigated performing hydrodynamic analysis. In addition, the effects of draft, buoyancy-weight ratio, and tendon inclination on tendon slack and dynamic instability behavior are analytically investigated.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.4 no.2
• /
• pp.61-67
• /
• 2001

Development of a barrier system for floating debris at river is introduced. The system is to prevent pollution of coastal water caused by marine debris which originates from land. The system consists of harrier boom, mooring system and boom winder. The harrier boom, which is self-inflatable with circular band spring, guides floating debris to a collecting conveyer system. Design parameters of the harrier system were reviewed and its design criteria were established. Based on the established design criteria, a pilot harrier system was built and tested at Tanchon branch of the Han river. It is proved that the suggested system is very efficient to collect floating debris at river.

• Journal of Korean Society on Water Environment
• /
• v.22 no.6
• /
• pp.1038-1044
• /
• 2006

The floating island was investigated in order to make a purification of lake water quality with the uptake of nutrients, the prevention of algae growth and the supply of habitat for aquatic plants. Although the concentrations of organics and nutrients inside facility were shown higher than outside, the quantitative analysis was not attainable. Nitrogen uptakes by Cattail, Phragmites japonica, Reed and Wild rice were shown 48.2, 98.0, 111.1 and $72.0g/m^2{\cdot}year$, respectively, and in the case of phosphorus they were 3.2, 8.3, 6.1 and $4.6g/m^2{\cdot}year$, respectively. Considering total floating areas of $2,560m^2$, the nitrogen uptake is totally estimated to $210.7kg/m^2{\cdot}year$ and $14.2kg/m^2{\cdot}year$ for the phosphorus uptake. In order to promote the spread of floating island, the selection of aquatic plants, the control of growth rate properly and the method of quantitative analysis for the purification of water quality and the application to the stream water should be thoroughly surveyed from all angles prior to the application.

• Geomechanics and Engineering
• /
• v.33 no.1
• /
• pp.101-112
• /
• 2023

When a submerged floating tunnel is connected to the ground, there is a risk of stress concentration at the shore connection owing to the displacement imbalance caused by low confinement pressures in water and high confinement pressures in the ground. Here, the effects of the boundary condition and stiffness of the joints installed at the shore connection on the behaviors of a submerged floating tunnel and its shore connection were analyzed using a numerical method. The analysis results obtained with fixed and ground boundaries were similar due to the high stiffness of the ground boundary. However, the stability of the shore connection was found to be improved with the ground boundary as a small displacement was allowed at the boundary. The effect of the joint stiffness was evaluated by investigating the dynamic behavior of the submerged floating tunnel, the magnitude of the load acting on the bored tunnel, and the stress distribution at the shore connection. A lower joint stiffness was found to correspond to more effective relief of the stress concentration at the shore connection. However, it was confirmed that joints with low stiffness also increase the submerged floating tunnel displacement and decrease the frequency of the dynamic behavior, causing a risk of increased resonance when wave loads with low frequency are applied. Therefore, it is necessary to derive the optimal joint stiffness that can achieve both stress concentration relief and resonance prevention during the design of shore connections to secure their dynamic stability.

• Journal of Coastal Disaster Prevention
• /
• v.1 no.4
• /
• pp.149-155
• /
• 2014

Flexible risers have been used extensively in recent years for floating and early production systems. Such risers offer the advantage of having inherent heave compliance in their catenary thereby greatly reducing the complexity of the riser-to-rig and riser-to subsea interfaces. Another advantage with flexible risers is their greater reliability. Concerns about fatigue life, gas permeation and pigging of lines have been overcome by extensive experience with these risers in production applications. In this paper, flexible riser analysis results were compared through coupled and uncoupled dynamic analyses methods. A time domain coupled analysis capability has been developed to model the dynamic responses of an integrated floating system incorporating the interactions between vessel, moorings and risers in a marine environment. For this study, SPM (Single Point Mooring) system for an FSU in shallow water was considered. This optimization model was integrated with a time-domain global motion analysis to assess both stability and design constraints of the flexible riser system.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.165-168
• /
• 2001

This paper presents a design of a divide unit supporting IEEE-754 floating point standard single-precision with 32-bit word length. Its functions have been verified with ALTERA MAX PLUS II tool. For a high-speed division operation, the radix-4 non-restoring algorithm has been applied and CLA(carry-look -ahead) adders has been used in order to improve the area efficiency and the speed of performance for the fraction division part. The prevention of the speed decrement of operations due to clocking has been achieved by taking advantage of combinational logic. A quotient select block which is very complicated and significant in the high-radix part was designed by using P-D plot in order to select the fast and accurate quotient. Also, we designed all division steps with Gate-level which visualize the operations and delay time.