• 한국항공운항학회지
• /
• 제18권3호
• /
• pp.77-83
• /
• 2010

"The prohibition of careless or reckless flight" is the regulation specified not only in the national air law but ICAO ANNEX and FAR. This article(item) has not been categorized properly unlike other items and the question such as why this is described as a fundamental and essential act can be answered only by the party subjected to administrative measures in case of Korea and this kind of violation is so rare that it is not easy to understand the legal meaning and the function of the term, "The prohibition of careless or reckless flight" In case of U.S where aviation cases are common, the distinction between the term "careless" or "reckless" operation depends on whether to recognize the given situation. Some incidents happened by failing to aware NOTAM, violating ATC, or T/W landing where a pilot did not recognize the violation itself are considered to be "Careless" flight. Others such as low altitude high speed flight, approximate flight, Rejecting ATC instruction where a pilot intends to or is remiss in safety are regarded as "Reckless" flight. For pilots who are required to take the highest level of care from preparing for flight to stopping engines or completely disembarking passengers from a plane, the clear understanding of the most basic concept of "careless" or "reckless" flight should be emphasized for the safe flight and it is the time for the authorities to set a standard for proper measures by definite legal interpretations.

• 시스템엔지니어링학술지
• /
• 제16권2호
• /
• pp.131-140
• /
• 2020

The characteristics of ballistic missiles are changing rapidly but studies have mostly focused on fragmentary flight trajectory analysis estimating the changing characteristics of some types, while there is a lack of research on comprehensive and efficient ballistic search, detection and prediction for missiles including the new types that have been gaining attention lately. This paper analyzes the flight trajectory characteristics of ballistic missiles at various ranges considering flight path angle adjustment, specific impulse and drag force with altitude based on the optimized equations of motion reflecting the parameters of North Korea's general and new types of ballistic missiles. The flight trajectory characteristics of representative ranges for each ballistic missile were analyzed by adjusting the flight path angle in the minimum energy method, lofted method, and depressed method. In addition, High value target can attacked by ballistic missiles considering flight path angle adjustment at various points. It's expected to be used to Threat Evaluation and Weapon Allocation, and deployment of defense systems by interpreting the analysis of the latest Iskander-class ballistic missiles and the new multiple rocket launcher.

• 한국항공운항학회지
• /
• 제5권1호
• /
• pp.7-16
• /
• 1997

Airspeed and altimeter calibration of Twin Bee was conducted by the flight test. We have adopted system to system method. Flight test data is corrected for instrumented error and position error, and the resultin data was satisfied. Climb Performance flight test also was conducted. But we could not have all data because of limited flight time. The resulted data was satisfied compare with calculated data.

• 한국항공운항학회지
• /
• 제3권1호
• /
• pp.37-47
• /
• 1995

It is very important to determine the performance and operating envelope of engine for aircraft's flight. The basic performance is provided by manufacturer, but installed engine's operating envelop is only determined by flight test. First, this study was measured cylinder head temperature(CHT), exhaust gas temperature(EGT) and oil temperature. At pre-determined altitude and power rate, these temperatures were measured by change of mixture ratio and mixture ratio condition for economic operation and max. power were found. And secondly, with the measured temperatures, possible positions of mixture lever were determined by flight test for stable flight Chang-91 and Lycoming IO-360-A series four cylinders engine with 200 hp was used for this study.

• International Journal of Aeronautical and Space Sciences
• /
• 제2권1호
• /
• pp.93-102
• /
• 2001

Flight control design for the autonomous waypoint navigation of aircraft is presented in this study. The waypoints are defined in terms of desired longitude and latitude. The control design is conducted in longitudinal and lateral directions, respectively. The lateral control is based upon coordinated turn strategy for which no sideslip is allowed under the turning maneuver. The longitudinal control is mainly focused on altitude hold during navigation. Neural network control approach is applied to the altitude-hold mode control. Simulation of the proposed control strategy has been performed under various conditions. A graphical simulation tool was developed to visually demonstrate the control technique developed in this study. A method to simulate the gas turbine transient behavior is developed. The basic principles of the method.

• 한국항공운항학회지
• /
• 제28권1호
• /
• pp.1-6
• /
• 2020

The purpose of this study is to analyze the radiation dose data of the space crew of the flight crew and to present a plan for the health management of the flight crew on the basis of the analysis. The analysis show that the average exposure dose of the flight attendants continued to rise, and the exposure dose of the flight attendants was five(5) times higher than that of the radiation workers. As a way to reduce the effects of cosmic radiation, this paper suggests appropriate personnel allocation by model, balanced allocation of high and low latitude routes by crew according to the aircraft type, and a low altitude flight plan for high latitude flight. This study will help aviation crew members understand cosmic radiation and trust in the company's policies. In the future, it will be necessary to enhance the flight safety of the crew by deriving meaningful results by analyzing data related to cosmic radiation of various routes.

• 제어로봇시스템학회논문지
• /
• 제21권9호
• /
• pp.888-897
• /
• 2015

A flight capability to take a terrain following flight near the ground is required to reduce the probability that a fighter aircraft can be detected by foe's radar fence in the battlefield. The success rate for mission flight has increased by adopting TFS (Terrain Following System) to enable the modern advanced fighter to fly safely near the ground at the low altitude. This system has applied to the state-of-the-art fighter and bomber, such as B-1, F-111, F-16 E/F and F-15, since the research begins from 1960's. In this paper, the terrain following system and GCAS (Ground Collision Avoidance System) was developed, based on a digital database with UTAS's TERPRROM (TERrain PROfile Matching) equipment. This system calculates the relative location of the aircraft in the terrain database by using the aircraft status information provided by the radar altimeter and the INS (Inertial Navigation System), based on the digital terrain database loaded previously in the DTC (Data Transfer Cartridge), and figures out terrain features around. And, the system is a manual terrain following system which makes a steering command cue refer to flight path marker, on the HUD (Head Up Display), for vertical acceleration essential for terrain following flight and enables a pilot to follow it. The cue is based on the recognized terrain features and TCH (Target Clearance Height) set by a pilot in advance. The developed terrain following system was verified in the real-time pilot evaluation in FA-50 HQS (Handling Quality Simulator) environment.

• 항공우주시스템공학회지
• /
• 제10권1호
• /
• pp.59-65
• /
• 2016

Korea Aerospace Research Institute (KARI) is developing an electric-driven HALE UAV in order to secure system and operational technologies since 2010. Based on the 5 years of flight tests and design experiences of the previously developed electric-driven UAVs, KARI has designed EAV-3, a solar-powered HALE UAV. EAV-3 weighs 53 kg, the structure weight is 21 kg, and features a flexible wing of 19.5 m in span with the aspect ratio of 17.4. Designing the main wing and empennage of the EAV-3 the amount of the bending due to the flexible wing, 404 mm at 1-G flight condition based on T-800 composite material, and side wind effects due to low cruise speed, V_cr = 6 m/sec, are carefully considered. Also, unlike the general aircraft there is no center of gravity shift during the flight. Thus, the static margin cuts down to 28.4% and center of gravity moves back to 31% of the Mean Aerodynamic Chord (MAC) comparing to the previously developed scale-down HALE UAVs, EAV-2 and EAV-2H, to minimize a trim drag and enhance a performance of the EAV-3. The first flight of the EAV-3 has successfully conducted on the July 29, 2015 and the test flight above the altitude 14 km has efficiently achieved on the August 5, 2015 at the Goheung aviation center.

• 한국산업융합학회 논문집
• /
• 제26권5호
• /
• pp.775-784
• /
• 2023

Drone images are being used more and more actively in the fields of surveying and spatial information, and are rapidly replacing existing aerial and satellite images. The technology of quickly acquiring real-time data at low cost and processing it is now being applied to actual industries beyond research. However, there are also problems encountered as this progresses. When high-resolution spatial information is acquired using a general 2D flight plan for a terrain with sever undulations, problems arise due to the difference in resolution of the data. In particular, when a low-altitude high-resolution image is taken using a drone in a mountainous or steep terrain, there may be a problem in image matching due to a resolution difference caused by terrain undulations. This problem occurs because a drone acquires data while flying on a 2D plane at a fixed altitude, just like conventional aerial photography. In order to acquire high-quality 3D data using a drone, the scale difference for the shooting distance should be considered. In addition, in order to obtain facade images of large structures, it is necessary to take images in 3D space. In this study, in order to improve the disadvantages of the 2D flight method, a 3D flight plan was established for the study area, and it was confirmed that high-quality 3D spatial information could be obtained in this way.

• 한국항공운항학회지
• /
• 제22권1호
• /
• pp.22-31
• /
• 2014

Military UAV(Unmanned Aerial Vehicle) operated as a RC(Remotely Control) model level within the limit of the military special use airspace until now. However, the high and medium altitude of URA(Unmanned Reconnaissance Aircraft) which the ROKAF have been trying to import recently is at the UAV level and needs the criteria for the classified airspace flights. The required flight criteria includes operator location, mission operation limit, equipment, etc., which are the principle and standard applied based on the airspace use for UAV. Also, the general flight rules, visual flight rules, instrument flight rules are required in order to have to be applied to the actual flight. Besides, an appliance regulation needs to be arranged regarding two-way communication, ATC and communication issue, airspace and area in-flight between UAS( Unmanned Aircraft System) users. An operation of the UAV in the air significantly requires the guarantee of the aircraft's capacity, and also the standardized flight criteria. A safe and smooth use is ensured only if this criteria is applied and understood by the entire airspace users. For the purpose, a standardized military UAV flight operations criteria that is to be applied for each airspace by UAV is to be prepared through analysis of the present state, a legend UAV system, and a special character analysis.