• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.301-304
• /
• 2006

The purpose of this study is to evaluate bonding properties of PMMA mortars using EPS with silane coupling agent. PMMA mortars are prepared with various silane coupling agent, and tested for flexural strength test, adhesion test in flexure and tensile strength in underwater and air. It is estimated that the application of silane coupling agent to PMMA mortar is more effective in underwater than air.

• Elastomers and Composites
• /
• 제46권3호
• /
• pp.218-222
• /
• 2011

본 연구에서는 반복적인 온도변화가 목분(50 wt.%와 70 wt.%)이 첨가된 폴리프로필렌 WPC(Wood Plastic Composites)의 기계적 특성에 미치는 영향을 조사하였다. WPC의 휨탄성계수(flexural modulus)와 휨강도 (flexural strength)는 반복 회수에 상관없이 동결 융해 시험에서 계면접착력의 약화 때문에 감소하는 경향을 보였다. 목분의 함량이 높을 때, 휨탄성계수의 감소가 비교적 높았다. WPC의 휨탄성계수와 휨강도는 고온($60^{\circ}C$) 저온 ($-20^{\circ}C$) 반복시험 후 고온에서 감소하고 저온에서 증가되었다. 폴리프로필렌(polypropylene, PP)의 유리전이점 (glass transition temperature: $-10^{\circ}C$) 보다 낮은 저온($-20^{\circ}C$에서 WPC는 높은 강성(stiffness)과 강도 (strength)를 유발시키는 유리상태(glassy state)로 존재한다. 고온에서 목분의 함량이 낮은 WPC가 연성의 증가 때문에 낮은 휨탄성계수와 휨강도를 보였다.

• 접착 및 계면
• /
• 제2권2호
• /
• pp.1-10
• /
• 2001

Epoxy molding compound (EMC)에 사용되는 실리카를 13.56 MHz 플라즈마 중합 장치를 이용하여 코팅하였으며, 코팅시간, 플라즈마전압, 내부압력을 변화시키면서 코팅조건을 최적화하였다. 플라즈마 중합 코팅용 단량체로는 1.3-diaminopropane, allylamine, pyrrole, 1,2-epoxy-5-hexene, allylmercaptan 및 allylalcohol을 사용하였으며, 코팅된 실리카의 접착성은 굴곡강도 측정으로 분석하였다. 또한 열팽창 계수 (CTE) 및 수분 흡습률 변화를 측정하였으며, 파괴 단면을 SEM으로 분석하여 접착 특성을 규명하고자 하였다. 플라즈마 중합 코팅된 실리카와 에폭시 수지간의 접착기구를 규명하기 위하여 플라즈마 고분자 코팅을 FT-IR로 분석하였으며, DSC를 이용하여 코팅된 실리카와 에폭시 수지간의 반응성도 고찰하였다. 1,3-diaminopropane과 allylamine으로 코팅된 실리카를 함유하는 EMC는 비교시편에 비하여 높은 굴곡강도, 낮은 CTE 및 낮은 흡습율을 보였으며, SEM 분석 결과 100% cohesive failure 거동을 나타내었다. 이러한 결과는 고분자 코팅내의 아민 반응기와 에폭시 수지간의 화학적 결합에 의한 것으로 판단되며, FT-IR 및 DSC 분석결과와 부합된다.

• 한국농공학회지
• /
• 제41권1호
• /
• pp.97-105
• /
• 1999

Recently , polymer concrete has been widely used in the construction industry because of its quick setting, high strength, excellect adhesion, watertightness and chemical resistance compared to ordinary cement concrete. Its application is also increased. In this paper, lightweight polymer mortars using unsaturated polyester resin and lightweight aggregate are prepared with various mix proportations, and tested for slump working life, apparent specific gravity , flexural and compressive strengths. As a result, the slump and working life can be controlled and thier flexural and compressive strengths are 9.7 to 22.0 MPa , and 23.0 to 100.8 MPa respectively at apparent specific gravities of 0.86 to 1.73.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 추계학술발표대회 논문집
• /
• pp.79-82
• /
• 2005

In this study, mechanical properties of carbon fabrics composite under the thermal shock cycling were evaluated. Due to the interactions between fiber and polymer matrix, it is reasonable to conclude that both thermal cycles of thermal shock result in improvement of interlaminar shear strength(ILSS) for the longer conditioning time duration. The rise in ILSS may be attributed to the improved adhesion by cryogenic compressive stress and also by the post-curing strengthening effect. However, the flexural and tensile strength were decreased with increasing conditioning time of thermal cycle.

• 한국산업융합학회 논문집
• /
• 제27권2_2호
• /
• pp.371-375
• /
• 2024

Epoxy resins are widely used in various fields due to their high adhesion, mechanical strength, and solvent resistance. However, as the volume decreases during the hardening process and the cooling process after hardening, stress is generated and when an external force is applied, the brittle material exhibits destruction behavior. To complement this, research has been conducted using inorganic nanofillers such as halloysite nanotube(HNT). HNT has a nanotube structure with the chemical formula of Al₂Si₂O₅(OH)₄·nH₂O and is a natural sediment of aluminosilicate. It has been used as additive to improve the mechanical properties of epoxy composites with exchange of amine group as a terminal functional group. In order to simplify complicated procedures of common wet method, a dry coating machine was designed and used for amine group exchange in previous research. In this study, they were applied as filler in epoxy composites, and mechanical properties such as tensile strength and flexural strength of composites were examined.

• 한국세라믹학회지
• /
• 제41권6호
• /
• pp.430-434
• /
• 2004

The values of fracture energy and mechanical flexural strength of Fiber Reinforced Cement (FRC) with polypropylene (PP) fiber modified by Ion Assisted Reaction (JAR), by which functional groups were grafted on the surface of PP fiber, was improved about 2 times as those of fracture energy and flexural strength of cement reinforced by untreated PP fiber. PP fiber was irradiated in O$_2$ environment by Ar$\^$+/ ion. The contact angle of PP treated by IAR decreased largely when compared with untreated PP. From this result, we expected that surface energy and interfacial adhesion force of treated PP fiber increased. The strain hardening occurred in the strain-stress curve of FRC including PP treated by IAR when compared with that of FRC with untreated PP. These enhanced mechanical properties might be due to strong interaction between hydrophilic group on modified PP fiber and hydroxyl group in cement matrix. This hydrophilic group on surface modified PP fiber was confirmed by XPS analysis. We clearly observed hydration products that were fixed at modified PP fiber due to the strong adhesion force of interface in cement reinforced modified PP by SEM (Scanning Electron Microscopy) study.

• 접착 및 계면
• /
• 제17권3호
• /
• pp.96-103
• /
• 2016

본 연구에서는 셀룰로스계 천연섬유인 대나무와 poly(lactic acid) (PLA)로 구성된 펠렛을 압출공정으로 제조하고, 여러 가지 함량의 대나무섬유/PLA 바이오복합재료를 사출공정을 통해 성형하였다. 바이오복합재료의 굴곡, 인장, 충격 특성 및 열변형온도에 미치는 대나무섬유의 수처리 영향을 조사하였다. 천연섬유의 열안정성, 바이오복합재료의 굴곡특성, 인장탄성률 및 충격특성은 섬유 함량은 물론 수처리 유 무에 의존한 반면, 열변형온도는 주로 수처리에 의해 영향을 받았다. 바이오복합재료의 기계적 특성과 충격특성의 증가는 이를 구성하고 있는 대나무섬유와 PLA 매트릭스 사이의 계면결합력이 대나무섬유의 수처리에 의해 향상되었기 때문이다. 연구결과는 친환경적이고 작업친화적인 물을 이용한 천연섬유의 전처리가 바이오복합재료의 성능을 향상시키는데 기여할 수 있다는 것을 제시하여 준다.

• The Journal of Advanced Prosthodontics
• /
• 제10권1호
• /
• pp.43-49
• /
• 2018

PURPOSE. The purpose of this in vitro study is to examine the effects of a nano-structured alumina coating on the adhesion between resin cements and zirconia ceramics using a four-point bending test. MATERIALS AND METHODS. 100 pairs of zirconium bar specimens were prepared with dimensions of $25mm{\times}2mm{\times}5mm$ and cementation surfaces of $5mm{\times}2mm$. The samples were divided into 5 groups of 20 pairs each. The groups are as follows: Group I (C) - Control with no surface modification, Group II (APA) - airborne-particle-abrasion with $110{\mu}m$ high-purity aluminum oxide ($Al_2O_3$) particles, Group III (ROC) - airborne-particle-abrasion with $110{\mu}m$ silica modified aluminum oxide ($Al_2O_3+SiO_2$) particles, Group IV (TCS) - tribochemical silica coated with $Al_2O_3$ particles, and Group V (AlC) - nano alumina coating. The surface modifications were assessed on two samples selected from each group by atomic force microscopy and scanning electron microscopy. The samples were cemented with two different self-adhesive resin cements. The bending bond strength was evaluated by mechanical testing. RESULTS. According to the ANOVA results, surface treatments, different cement types, and their interactions were statistically significant (P<.05). The highest flexural bond strengths were obtained in nano-structured alumina coated zirconia surfaces (50.4 MPa) and the lowest values were obtained in the control group (12.00 MPa), both of which were cemented using a self-adhesive resin cement. CONCLUSION. The surface modifications tested in the current study affected the surface roughness and flexural bond strength of zirconia. The nano alumina coating method significantly increased the flexural bond strength of zirconia ceramics.

• 한국산학기술학회논문지
• /
• 제10권6호
• /
• pp.1298-1303
• /
• 2009

현무암 단섬유로 강화시킨 시멘트 복합재료의 섬유장과 혼입률에 따른 인장강도와 굽힘강도의 변화를 고찰하였다. 인장 및 굽힘강도의 증가는 섬유장의 증가에 따른 효과보다는 섬유 혼입률의 증가가 더 큰 역할을 하였다. 또한 현무암 단섬유와 시멘트 사이의 우수한 계면 접착력은 물리적 성질의 향상에 좋은 영향을 미친다고 보여진다. 시멘트의 수화시 생성되는 알칼리 조건과 유사한 포화 $Ca(OH)_2$ 용액에서의 중량감소율을 관찰한 결과 현무암 단섬유는 3주 동안의 침지 후에도 매우 작은 중량감소율을 나타냈다.