• Journal of Korean Society on Water Environment
• /
• v.31 no.2
• /
• pp.151-158
• /
• 2015

The aim of this research is to derive an optimum operating condition for the thermal solubilization equipment that is employed to increase concentration of soluble organic materials and to assess whether it would be possible to use the waste sludge generated by thermal solubilization reaction as an external carbon source in biological denitrification process. For the purpose, we have constituted a laboratory-size thermal solubilization equipment and have assessed thermal hydrolysis efficiency based on various reaction temperature and reaction time. We have also derived SDNR using the waste sludge generated by thermal solubilization reaction through a batch experiment. As a result of research, the highest thermal hydrolysis efficiency of about 42.8% was achieved at $190^{\circ}C$ of reaction temperature and at 90 minutes of reaction time. And when SDNR was derived using the waste sludge, the value obtained was $0.080{\sim}0.094\;g\;NO_3{^-}-N/g\;MLVSS{\cdot}day$, showing SDNR that is higher than that obtained by the results of existing researches that used common wastewater as an external carbon source. Accordingly, in view of the fact that food wastes vary quite a bit in characteristics based on the area they are generated from and seasonal change, it seems that a flexible operation of thermal solubilization equipment is required through on-going monitoring of food wastes that are imported to food wastes recycling facilities.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.3
• /
• pp.115-119
• /
• 2018

Defining and measuring non-rigid or flexible parts has been controversial in industry for many years. There are two primary areas of controversy. The first is agreeing on what exactly a non-rigid part is. The second is agreeing on how to define and measure a non-rigid part. The subject of non-rigid parts is further complicated by the brief coverage it receives in the national and international standards. This leaves each company to improvise or create its own rules for non-rigid parts. There are some who believe that Geometrical Dimensioning and Tolerancing (GD&T) should not be used on non-rigid parts. This is not true. The ASME Y14.5M standard applies to rigid parts as a default condition. However, there is no definition given for a rigid part. The term rigid part has been used in industry for so long that it has gained a definition by its general use. When most people in industry say rigid part, they are referring to a part doesn't move (deform or flex) when a force (including gravity) is applied. How much force is relative based on the part characteristics. In reality, all parts will deform (or flex) if enough force is applied. Using this logic, all parts would be considered non-rigid. However, we all know that this is not how parts are treated in industry. Although GD&T defaults to rigid parts, it should also be used on non-rigid parts with a few special techniques. Actually 50~60% of all products designed contain parts or features on parts that are non-rigid. Therefore, we try to suggest the definitions of rigid and non-rigid parts and method to measure non-rigid parts.

• Journal of The Korean Association of Information Education
• /
• v.19 no.4
• /
• pp.449-458
• /
• 2015

In the knowledge and information society, computer education for elementary school is very important. When students are young, they use digital devices. In these days, computer education is software education has attracted only focused on software education curriculum and courses are being made. A software education must be included the education of a computer system. In this study, at least what the computer was designed and built from the elementary curriculum about whether that is how the computer operates. Not made from first grade to sixth grade to grade-level system it made the students of level 7 step system. This is a flexible strategy for education in the school or grade level requirements. This study is meant to argue that the need to be a computer system from elementary education.

• Culinary science and hospitality research
• /
• v.4
• /
• pp.211-224
• /
• 1998

This study is research about coinage and interpretation of Japanese Menus in luxury hotels in Seoul. Japanese Menus consist of three categories. These can be expressed A+B+C groupings. A represents Ingredients, C represents the cooking method, while B shows the name of a region(B1), the seasoning(B2), and a word that expresses the shape of the food(B3), etc. B can be flexible in meaning. However, the setting, A+B+C, is not always used strictly for these category meanings. Ingredients, A, is sometimes used independently(ex, ぃくとろろ), and at other times B1 + C, B2 + C or B3 + C are used. Sometimes A+C is used without B. The most general expression is Ingredients + the method for cooking(A+C Type). By knowing the menu description the food type and cooking method can be discovered. Most concrete method is Ingredients + procedure for seasoning + cooking method(A+B2+C Type) show how something is made and what kind of seasoning. This method is frequently used for roasted dishes with seasoning. Food which is expressed by A, Ingredients, does not require a complicated cooking process and is fixed by a conventional cooking process without any explanation ; delicacies(珍味), an hors d'oeuvres(前菜), sushi(Japanese vinegared rice delicacies) and sliced raw fish. There are two obstacles in interpreting Japanese Menus. First, we cannot look up the menu words easily in a dictionary because the mixing of Chinese Characters and the pronunciation of them differs from Korean chinese characters. Secondly, the names of Japanese food are inserted with a name of a place or another symbolic word, so they sometimes cannot be translated. We should offer various and accurate information for foreign customers because various Non-Japanese people use these restaurants frequently. This will enable them to enjoy themselves more comfortably. Therefore, you should decide the words carefully and provide an explanation about the complicated parts of the Menu when you work with Menu copywriter.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.3
• /
• pp.336-342
• /
• 2007

Industrial HMI(Human Machine Interface) system is the main element among the factory automation processes and have been used to monitor and control operation and status of machine in factory with PLC. This HMI often brings heavy loads to the system development and difficult decreasing the system because it tends to use a specific system per each manufacturer. Therefore, in this thesis, we have developed an embedded linux-based embedded industrial HMI software modules which can be used for touch panel embedded system to solve these problem. In this module, we have used the Qt/Embedded software component because it can be used by all systems which support C++ compiler without modifying the existing codes. We can design more flexible system and network configuration because we have used the wireless communication module. In this thesis, we implement linux-based HMI software modules which are capable of wireless communication as well as bringing the mobility to the overall system and finally decreasing the system development loads by using the general purpose OS with competitive price.

• Journal of the Korean housing association
• /
• v.25 no.4
• /
• pp.39-46
• /
• 2014

This research was for the investigation and analysis of the illustration of modular construction application which is different use by each school facility since modular construction related examples are rare in domestic situation, and it has a limitation because of its being basic research material for generating the basic form of modular construction. The research results are as followings. First, in case of school facility from illustration investigation results, module measurement of class modulation is as similar as $3m{\times}10m$, but in resident facility the planning of more flexible plane shape can be possible since modules of 6 cases are free and various, and facade form of various types can be appeared by combination of module unit. Second, as a result of the generated characteristics in compared analysis of representative examples, school facilities were highly indicated for movability and duration reduction areas, and the flexibility, economic efficiency, and environment-friendliness was indicated low relatively. Third, the basic planning types of modular construction can be largely divided into layered type, horizontal (straightway) type, and compound type. The layered type has a short traffic line and facility system and is appropriate for the low-rise form unless separate construction method is used since it is susceptible to load. The horizontal type is advantageous for securing an opening since it has wide extent in light but has a long traffic line and facility system. Finally, the compound type can be possible for planning of various forms but needs the combination of various unit modules and traffic line and facility plan for it can be difficult.

• Journal of Navigation and Port Research
• /
• v.27 no.1
• /
• pp.49-54
• /
• 2003

Recently, mega-float offshore structure is studied as of the effective utilization of the ocean space. And mega-float structure are now being considered for various applications such as floating airports. container yard, offshore cities and so on. This mega-float structure is relatively flexible compared with floating structures like large ship. When we estimate dynamic responses of these structures in waves, the elastic deformation is important, because vertical dimension is small compare with horizontal. the analysis of the dynamic reponses as it receive regular wave is studied. The finite element method is used in the analysis of structural section of this model. And the analysis is carried out using the boundary element method in the fluid division. In oder to know the characteristics of the dynamic response of the mega-float structures, effects of wavelength, water depth, and wave direction on the dynamic response of the floating structure are studied by use of numerical calculation.

• The Transactions of the Korea Information Processing Society
• /
• v.1 no.4
• /
• pp.531-540
• /
• 1994

Spline curve scheme is the most valuable tool for the CAD of industrial products. Hence, the development of a new, effective curve scheme can have immediate impact on the current design industries. This paper develops and implements a new methodology for the implementation of the visually continuous class of splines which can produce a more flexible and diverse curve shapes. This class of splines has advantaged over existing splines in that it can accommodate wider range of shapes while maintaining the interpolators property of the ordinary cardinal splines. Most importantly, we avoid using the previous method of implementing G$^1$ curves, where users must specify scalar values for the control of curve shapes. We derive and implement an easy-to -use transformation between the user-specified graphical tangent vectors and the actual parameters for the resulting curve. Since the resulting curve shape reflects original tangential direction faithfully, CAD users can simply represent approximate curve shapes with proper tangents. Consequently, a simple user interface device such as a mouse can effectively produce a various spline curves using the proposed spline tool.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.5C
• /
• pp.469-477
• /
• 2007

Most multimedia source coders exhibit unequal bit error sensitivity. Efficient transmission system design should therefore incorporate the use of matching unequal error protection (UEP). In this paper, we present and evaluate a flexible space-time coding system with unequal error protection. Multiple transmit and receive antennas and bit-interleaved coded modulation techniques are used combined with rate compatible punctured convolutional codes. A near optimum iterative receiver is employed with a multiple-in multiple-out inverse mapper and a MAP decoder as component decoders. We illustrate how the UEP system gain can be achieved either as a power or bandwidth gain compared to the equal error protection system (EEP) for the identical source and equal overall quality for both the UEP and EEP systems. An example with two/three transmit and two receive antennas using BPSK modulation is given for the block fading channel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.9
• /
• pp.880-886
• /
• 2014

Many railway signalling functions have increasingly depended on computer software with recent development in computing technology, leading to evolution into more flexible and intelligent railway signalling system. Meanwhile, software programs are likely to have many errors and the cost incurred by such errors has increased. Especially, if fatal software error occurs during railway operation, it may result in loss of lives. So the software verification and validation have become more important. It is needed for software functional safety tool to support these, but most commercial tools depend on direct access to the system's memory, resulting in many difficulties in application. Owing to such difficulties and complexity, they are rarely used in railway signalling system software validation. In this study, a new testing tool for software functional testing through an external interface that can be easily used in functional testing of software was developed. Such testing tool allows development and analysis of test cases for black-box testing through analysis of actually used interface protocols, leading to increased user convenience.