• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 춘계학술대회 논문집
• /
• pp.209-213
• /
• 1998

This study considers flowshop scheduling problem related to flexible maufacturing cell in which consists of two machining centers, robots for loading/unloading, and an automated guided vehicle(AGV) for material handling between two machining centers. Because no machinng center has buffer storage for work in process, a machining center can not release a finished job until the empty AGV is available at that machining center. While the AGV cannot tranfer an unfinished job to a machining center until the machining center empty. In this paper, an new heuristic algorithm is given to find the sequence that minimize their makespan.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.461-462
• /
• 2010

• 전자통신동향분석
• /
• 제36권3호
• /
• pp.65-75
• /
• 2021

In the era of the 4th industrial revolution, interest in flexible devices is increasing for information and communication technology electronic products. This is a hot technology field in which competition is intensifying to preoccupy the global market for flexible electronic devices because of the many advantages of ultra-lightweight, flexibility, design diversity, high applicability, and low cost. Some flexible electronic products have been commercialized in Korea, but they are still inadequate in terms of price versus performance, so technology development is required continuously. Particularly, the development of flexible electronic materials is emerging as a key factor for flexible electronic device applications. In this study, we will look into the flexible electronic material technology and industry trends following the trend of flexible technology changes in the display, secondary battery, and solar cell, which has emerged as national core industry and has secured global competitiveness. In addition, I want to introduce the Flexible Electronic Material Center, which was established to foster the flexible electronic material industry.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.299-301
• /
• 2007

An organic-inorganic hybrid solar cell fibers with characteristics such as formability, low-cost and tailorability was developed by deposition of C60 and CuPc on fiber surface. In spite of some variation according to the temperature of ITO deposition, the maximum open circuit voltage of 0.39V was attained at $150^{\circ}C$(1000end). The resulting solar cell showed the performances Isc=0.482, Voc=0.320, FF=0.285 ${\eta}_{e}=0.044$% which are comparable to one of other types of solar cells in literature.

• 산업경영시스템학회지
• /
• 제19권40호
• /
• pp.253-261
• /
• 1996

In optimizing the layout design of a multi-product assembly environment, tile analysis of the material flow is a vital ingredient. In flexible assembly systems, assembly time is usually very short thus the transfer time is relatively more important Therefore operations sequence must be so determined, that have no backtracking operations as possible as, It is important to form cells, so that they have no intercell movement in curring much processing delay, and to arrange machines as possible as densly. This study presents a independent cell formation method considering operation sequences and machine capacity in flexible assembly systems.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.153-155
• /
• 2009

In this study, we fabricated the $Cu(In,Ga)Se_2$ (CIGS) thin-film solar cells by using a polyimide substrate. The CIGS thin-film was deposited on Mo coated polyimide substrate by a 3-stage co-evaporation technique. Because the polyimide shows thermal transformation at about $400^{\circ}C$, the substrate temperature of co-evaporation process was set to below $400^{\circ}C$. Corresponding solar cell showed a conversion efficiency of 7.08 % with $V_{OC}$ of 0.58 V, $J_{SC}$ of 24.99 $mA/cm^2$ and FF of 0.49.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.1250-1255
• /
• 1990

This paper discusses an optimal cyclic scheduling problem for a FMC (Flexible Manufacturing Cell) modeled by a two-machine flowshop with two machining centers with APC's (Automated Pallet Changers), an AGV (Automated Guided Vehicle) and loading and unloading stations. Cyclic production in which similar patterns of production is repeated can significantly reduce the production lead-time and WIP (Work-In-Process) in such flexible, automated system. Thus we want to find an optimal cyclic schedule that minimizes the cycle time in each cycle. However, the existence of APC's as buffer storage for WIP makes the problem intractable (i.e., NP-complete). We propose an practical approximation algorithm that minimizes, instead of each cycle time, its upper bound. Performances of this algorithm are validated by the way of computer simulations.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.383-383
• /
• 2011

We fabricated thermal annealing-free polymer solar cells (PSC) by processing with additive and applied to flexible substrates. The 1, 8-Diiodooctane of 3 vol% blended with active solution resulted in enhancement of $J_{SC}$ due to increase of light absorption and hole mobility as improving the crystallinity of P3HT. In addition, the $V_{OC}$ of PSCs with additive was improved by inserting $TiO_2$ layer without any treatment. The $TiO_2$ layer prevented the direct contact between active layer and Al electrode and reduced the charge recombination near Active/Al interface. It was confirmed by calculation of J0 and photo-voltage transient measurement. The power conversion efficiencies of annealing-free PSCs using additive for ITO glass and flexible (ITO PEN) substrate were obtained 3.03% and 2.45%, respectively.

• 한국정보처리학회논문지
• /
• 제6권7호
• /
• pp.1817-1824
• /
• 1999

유연 생산시스템의 스케줄링 문제는 생산시스템의 효율성 제고에 많은 관심을 끌고 있다. 이 연구에서는 유연 생산시스템의 이산적 스케줄링 문제를 변형의 개념을 가지고 해결하고자 한다. 이산적 개념을 표현하는 데는 패트리 네트가 효율적인 방법중의 하나이다. 패트리 네트의 변형이란 기존의 모델이 가지고 있는 기본적인 성질들을 변형시키지 아니하고 해석하고 분석하기가 편리한 사이즈로 기존의 모델링 변형시키는 것이다. 특히 본 연구에서는 타임 패트리 네트의 변형을 이용하여 대기시간과 완료시간을 혼합하여 스케줄링 문제를 분석하는 기법을 제시하였다.

• 한국정밀공학회지
• /
• 제3권2호
• /
• pp.16-27
• /
• 1986

The problems concerning FMC (Flexible manufacturing cell) system layout were treated in this paper. In fact, there being no clear definition about FMS (Flexible manufacturing system), it could be treated as the system adopting flexible-automation and FMS has been improving as a form of parts machining system. It was thought that the problems of combination of machine tool groups and parts family were important. Parts familly and machine tool groups were made up by means of multivariate analysis and the minimum trnsfer concept using correlation coefficient ($\rho$). And FMC system was layout by directional graph according to the FMS classifications.