• Animal Systematics, Evolution and Diversity
• /
• v.32 no.4
• /
• pp.272-280
• /
• 2016

Most scyphomedusae jellyfishes recorded in Korean waters are temperate and subtropical species. In the present study, two cold-water jellyfishes from Korean waters are first described. Scyphomedusae were collected from the coasts of Gangneung and Ulsan of the East Sea, and Boryeong, and the eastern area of the Yellow Sea from June 2006 to May 2015. Scyphomedusae collected in Ulsan and Gangneung were identified morphologically as Aurelia limbata Brandt, 1835. Their umbrella was 250-500 mm in width and 30-50 mm in height; the exumbrella was white and the subumbrella was dark brown in color. The vascular system was complex with anastomosed branches. Individuals of this species lived at about 6.6-9.9℃ and 30-50 m depth in Korean waters. Scyphomedusae collected from the center of the Yellow Sea and from Boryeong were identified as Parumbrosa polylobata Kishinouye, 1910. Their umbrella was disc-shaped, 80-200 mm in width and 20-40 mm in height. Its milky white gonads could be seen through the transparent exumbrella. The stomach cavity was round and flat with four interradial cavities connected by subgenital cavities, and the four oral arms were bifurcated and spear-head shaped. Individuals were found at about 6.4-10.0℃ and 40-90 m depth in Korean waters. The identities of both species were confirmed by molecular analysis using nuclear ribosomal DNA sequences.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.6
• /
• pp.328-336
• /
• 2015

Currently, 22% of the total energy consumption of buildings in Korea is used for lighting. Light-shelves have garnered attention as a way to reduce consumption, but there are few studies on the types of curve and curvature, which limits the improvement of light-shelf performance and its design. This study constructed a test bed of actual residential types to evaluate the performance. Outcomes of light usage, according to variables of light-shelves, were used as indicators of performance evaluation. The results are as follows:1) Performance evaluation was conducted on flat-type light-shelves to verify performance of curvature-shelves, which are movable with a width of 200 mm, and the most ideal angle and specification per solar term are calculated. 2) The (-) shaped curvature contributed to a reduction in energy consumption and an improvement of evenness. 3) In case of light-shelves with (-) shaped curvature, an increased angle not exceeding $80^{\circ}$ of the arc contributed to an improvement of light penetration. 4) Appropriate specifications of curved light-shelves include movable types with widths of 200 mm, and angle ranges of $20^{\circ}{\sim}60^{\circ}$. 5) Light energy consumption of a movable light-shelf with curvature and width of 200 mm were reduced by 17% and 7.8% compared to a $0^{\circ}$ fixed and a movable light-shelf, respectively.

• Journal of the Korea Convergence Society
• /
• v.9 no.10
• /
• pp.229-235
• /
• 2018

The Hanok church is an important cultural heritage that can be considered from a religious point of view of life in the modern age in Korea. We will investigate the bounadaries of the Hanok church built in modern age and the characteristics of Hanok architectural. To do so, we have conducted field trips, interviews, and repair reports of the Gimje Geumsan Church in the Jeollabuk province. The Geumsan Church is present, and the architectural characteristics can be confirmed in detail. In addition, Yugwang School, which was responsible for the education function, was able to guess the location and size through the data. As a result, the boundaries of Geumsan Church is the present fence, the west side has the building, and the east side has the playground. The Geumsan Church's flat form was divided into male and female according to the space configuration of ㄱ-shaped reflecting Confucian thought of the time. And it seems that the Yugwang school was located in the entrance part of the modern church with a two-frame scale, which is suitable for lecture.

• Journal of Conservation Science
• /
• v.4 no.1 s.4
• /
• pp.3-10
• /
• 1995

This study focused on the reconstructional point of Shinan ship-wreck that was excavated between $1976\~1984$. The wreck, which might be sunk in the beginning of the 14th century, is regarded as a vessel of Yuan dynasty, China. This paper tried to find out some structural characteristics and principal dimensions for restoration. The Shinan shipwreck's structural characteristics are summarized as follow, 1) The Shinan shipwreck is formed V-shaped cross section with bar keel, 2) The vessel is divided 8 holds by 7 bulkheads. 3) The ship has flat type stem and transome stern. 4) A rabbeted clinker -built is basically adopted on planking joint. 5) A wooden sheathing, which means a sort of protecting board against marine insects, is covered outside of the main hull, 6) For making an watertight structure, oakum and lime mixtured t'ung-oil are used along the seam of planking and bulkhead. 7) A V-shaped deep water-way exists at both deck side. 8) The shipwreck is believed to have 2 masts at least. 9) The shiptimbers are classified as Chinese Red Pine(Pinus Massonina) which is mainly grown in the southern part of China. Considering as mentioned above the structural characteristics, Shinan ship-wreck could be classified as Chinese Fu-chuan type(복선형) of sea-going ship. The Shinan ship's principal dimensions which are calculated on the basis of Chinese traditional shipbuilding custom, are as follow, Length overall(L.O.A). : 34.80m Length water line(L.W.L) : 24.90m Breadth(B.max.) : 11m Breadth(B) : 10m Depth at keel line(H) : 3.75m Draft(D). : 3.15m Freeboard(F) : 0.65m Ratio, length/breadth(L/B). : 2.26 Ration, breadth/depth(B/D) : 3.5 Height of stem : 7m Height of stern : 10m Displacement : ab.340ton.

• Laser Solutions
• /
• v.17 no.1
• /
• pp.1-6
• /
• 2014

Indium tin oxide (ITO) is an important transparent conducting oxide (TCO). ITO films have been widely used as transparent electrodes in optoelectronic devices such as organic light-emitting devices (OLED) because of their high electrical conductivity and high transmission in the visible wavelength. Finding ways to control ITO micromachining depth is important role in the fabrication and assembly of display field. This study presented the depth control of ITO patterns on glass substrate using a femtosecond laser and slit. In the proposed approach, a gaussian beam was transformed into a quasi-flat top beam by slit. In addition, pattern of square type shaped by slit were fabricated on the surfaces of ITO films using femtosecond laser pulse irradiation, under 1030nm, single pulse. Using femtosecond laser and slit, we selectively controlled forming depth and removed the ITO thin films with thickness 145nm on glass substrates. In particular, we studied the effect of pulse number on the ablation of ITO. Clean removal of the ITO layer was observed when the 6 pulse number at $2.8TW/cm^2$. Furthermore, the morphologies and fabricated depth were characterized using a optical microscope, atomic force microscope (AFM), and energy dispersive X-ray spectroscopy (EDS).

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.3
• /
• pp.295-300
• /
• 2011

Ship are a box-shaped structure. It is used often fore and aft parts, bilge strake, deck with camber of ship structures. When this structure is compared with flat plate structure, it different to behaviour. Generally, if it subjected to axial compressive load, ultimate strength depend on the change of curvature. Also, In this paper, stiffened curved plate with 1/2+1+1/2 bay model subjected to compressive load carried out the elasto-plastic large deflection series analysis. and parameter effect considered slender ratio, web height/thickness as well as change of curvature and investigated collapse mode for analysis model.

• Journal of the Korean institute of surface engineering
• /
• v.37 no.5
• /
• pp.253-262
• /
• 2004

Calcareous deposits are the consequence of pH increase of the electrolyte adjacent to metal surface affected by cathodic current in seawater. It obviously has several advantages over conventional coatings, since the calcareous deposit coating is formed from coating (Mg$^{2+}$, $Ca^{2+}$) naturally existing in seawater. In consideration of this respect, environment friendly calcareous deposit films were formed by an electro deposition technique on steel substrates submerged in 48$^{\circ}C$ natural seawater. And the influence of current density, coating time and attachment of steel mesh on composition ratio, structure and morphology of the electrodeposited films were investigated by Scanning Electron Microscopy(SEM), Energy Dispersive Spectroscopy(EDS) and X-Ray Diffractor(XRD), respectively. Accordingly, this study provides a better understanding of the composition between the growth of $Mg(OH)_2$ and $CaCO_3$ during the formation of electro deposit films on steel substrate under cathodically electrodeposition in $48^{\circ}C$ natural seawater. The Mg compositions, in general, are getting decreased regardless of current density but Ca compositions are getting increased as electrodeposition time runs. That is, $Mg(OH)_2$ compounds of brucite structure shaped as flat type is formed at the initial stage of electrodeposition, but CaCO$_3$ compounds of aragonite structure shaped as flower type is formed in large scale. Besides, $Mg(OH)_2$ compounds were much formed at 5 A/$\m^2$ environment condition compared to the 3 A/$\m^2$ and 4 A/$\m^2$ environment conditions. This is because that OH- which was comparatively largely generated at the metal surface is preferably combined with $Mg^{2+}$TEX>.

• Korean Journal of Agricultural Science
• /
• v.13 no.2
• /
• pp.219-226
• /
• 1986

A study was conducted to provide direct comparisons of the effect of variations in herbage use, grazing and social behaviour upon the flat, slope and forest grassland with a total 30 Korean Native Cattle and 5 Korean Native Goats under 4-year old grassland established by intensive sowing method in Daecheon. The results obtained are summarized as follows; 1. Relative intake index, dry matter intake per animal and dry matter digestibility by Korean Native Goats in flat, slope and forest grassland were 35.2%-462g-63.7%, 35.0%-459g-63.0% and 29.8%-391g-62.1%, respectively. 2. Grazing time by Korean Native Cattle was not different among the grassland types, but ruminating time was increased in slope grassland, whereas in forest grassland was decreased. Resting time was increased in forest grassland, whereas in slope grassland was decreased. Walking time was increased in flat grassland, but loafing time was increased in forest grassland. The number of rumination, chews per bolus and defecation number were decreased in forest grassland. The number of drinks, total drinking water and walking distance were increased in slope grassland. 3. Animal distance, occupied area per animal and sub group formation by Korean Native Cattle in flat, slope and forest grassland were $3.4m-11.9m^2-3.6head$, $3.56m-11.0m^2-3.7head$ and $3.70m-14.6m^2-3.4head$, respectively. The order of grazing movement was similar to the pear-shaped grazing formation, but the relations of dominance between first grazer and last grazer upon different grassland types was not clear.

• Korean Journal of Heritage: History & Science
• /
• v.45 no.2
• /
• pp.4-19
• /
• 2012

There remain many royal tombs of the Goryeo Dynasty in Gaeseong and Ganghwa. During the Goryeo Dynasty, these royal tombs were taken over tradition of tomb construction style from previous generation, and they completed their own inventive style. Furthermore they handed down those style to the Joseon Dynasty. The area of tomb was divided into 3 or 4 steps, and stone figures and T-shaped houses for sacrifice were arranged on each steps. It was the stone chamber of lateral opening style which had an entrance to southward, and it was formed as a rectangular box-shaped with a pile of stone walls and a flat ceiling. There was a coffin stand in the middle of floor, and traditional bricks were around them. The wall side and ceiling had been whitewashed and painted pictures. These are general characteristics for the tomb construction style of the Goryeo Dynasty. By the way, we can notice a number of features except those general things with inspection in detail. In early days, we confirmed 1step-parallel fulcrum ceiling, coffin stand of all in one stone, bier of burial artifact, and mural of plant material as a set, but they were changed as flat ceiling, Red-stone wall with rectangular stone, coffin stand set as stone pillar through the period of transitional form as of in the late 12th century. In case of several royal tombs, the fragments of king's epitaph which were confirmed from tombs could be defined owners clearly, and there were considerable timing difference between the large numbers of celadons which were excavated with the fragments of king's epitaph and recording chronologically of stone chamber structure. The reason for timing difference is that posterity artifacts were buried through repairing courses by occasion of destruction caused by robbing of the royal tombs. Meanwhile I inferred the existing hypothesis about owners of royal tombs and autonym ones in comparison the burial spot direction of hypothesis ones and outcomes of excavation. Therethrough, some hypothesis about owners of royal tombs such as Myung-neung which was assumed as tomb of the King Choongmok were not correct.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.5
• /
• pp.45-57
• /
• 2002

In this paper, the results gained by applying many impingement models to the cylinder and flat plate were analyzed in comparison with the experimental data to study a spray/wall interaction phenomena. To begin with, the behavior of spray injected normal to the wall was analysed using three different impingement models ; Naber and Reitz model(NR model), Watkins and Wang model(WW model) and Park and Watkins model(PW model) in the present calculation. The results obtained from these models were compared with experimental data of Katsura et. al. The results indicated that PW model was in better agreement with experimental data than the NR and WW model. Also f3r spray injected at 30DEG , the result of three models were compared with experimental data of Fujimoto et. al. The results showed that m model overpredicted the penetration in the radial direction because this model was based on the inviscid jet analogy. WW model did not predicted the radius and height of the wall spray effectively. It might be thought that this discrepancy was due to the lack of consideration of spray film velocity occurred at impingement site. The result of PW model agrees with the experimental data as time goes on. In particular, a height of the spray droplets was predicted more closely to the experimental data than the other two models. The results of PW model in which the spray droplets were distributed densely around the edge of droplet distribution shaped in a circle had an agreement with the experimental data of Fujimoto et. al. Therefore, it was concluded that PW model performed better than M and WW model for prediction of spray behavior. The numerical calculation using PW model performed to the cylinder similar to the real shape of DI engine. The results showed that vortex strength near the wall in the cylinder was stronger than that in the case of flat plate. Contrary to the flat plat, an existence of the side wall in the cylinder caused the tangential velocity component to be reduced and the normal velocity component to be increased. The flow tends to rotate to the inside of cylinder going upward to the right side wall of cylinder gradually as time passes. Also, the results showed that as the spray angle increases, the gas velocity distribution and the tumble flow seemed to be formed widely.