• 한국입자에어로졸학회지
• /
• 제9권2호
• /
• pp.79-87
• /
• 2013

In this study, the characteristics of turbulent flow and collection efficiency for an one-stage electrostatic precipitator(ESP) with slit type collecting electrode for urban railway underground tunnels were obtained using computational fluid dynamics(CFD) commercial code FLUENT 6.3 and lab-scale experiments. The electrostatic precipitator was operated under high gas velocity(3~12m/s). Five different designs of collecting electrode, flat plate-type and a slit-type of 3mm, 5mm, 7mm and 10mm slit width and four various gas velocity(3, 6, 9, and 12m/s) were used and applied. A standard k-${\varepsilon}$ model in CFD commercial code FLUENT 6.3 was used for flow simulation. The flow simulation results showed that the turbulent intensity of flat plate-type was higher than slit-type under all gas velocity conditions and also the turbulent intensity of flat plate-type was increased continuously, but in case of slit-type was maintained at constant range. And, the turbulent intensity was decreased according to increasing of slit width. The experimental results showed that the collection efficiency of slit-type was higher than flat plate-type under all gas velocity conditions. And, over 6m/s gas velocity condition, the collection efficiency of 5mm and 7mm was highest, when compared to 3mm and 10mm.

• 한국측량학회지
• /
• 제37권4호
• /
• pp.219-231
• /
• 2019

간판은 유형마다 간판의 규격이 정해져 있으나 실제 설치된 간판은 형태와 크기가 일정하지 않다. 또한, 간판은 간판 내부의 색상에 대한 규정이 정해져 있지 않기 때문에 다양한 색상을 갖고 있다. 간판을 인식하기 위한 방법은 도로표지판과 차량번호판을 인식하는 유사한 방법으로 생각할 수 있으나 간판의 특성으로 인해 도로표지판과 차량번호판과 유사한 방법으로 간판을 인식할 수 없는 한계점이 있다. 이에 본 연구에서는 딥러닝 기반의 Faster R-CNN 알고리즘을 이용하여 불법 및 노후 간판의 주요 대상이 되는 판류형 간판을 인식하고 간판의 영역을 자동으로 추출하는 방법론을 제안하였다. 스마트폰 카메라를 이용하여 촬영한 간판 영상을 통해 판류형 간판을 인식하는 과정은 2가지의 순서로 나뉜다. 먼저, 다양한 유형의 간판 영상에서 판류형 간판을 인식하기 위해 딥러닝을 이용하여 간판의 유형을 인식하였으며 그 결과는 약 71%의 정확도로 나타났다. 다음으로 판류형 간판의 경계영역을 인식하기 위해 간판 영역 인식 알고리즘을 적용하였을 때 85%의 정확도로 판류형 간판의 경계영역을 인식하였다.

• 한국의류학회지
• /
• 제16권4호
• /
• pp.357-369
• /
• 1992

The purpose of this study was to clarify the relationship between the Ideal Beauty of Body and the Form of Dress, and to analyze its historical perspectives. First of all, the concept of the Ideal Beauty of Body, the definition of Dress Form, and the method and system to clarify Dress Form were depicted. Based on this frame work, the Form of Dress related to the Ideal Beauty of Body was described historically. For this purpose, documentary research were conducted and representative photography and paintings were used. The analysis was limited to the female one-Piece dress from Ancient Egypt, Greece, Rome, Byzantine, Gothic, Renaissance, Baroque, Rococo, Naoclassicism, and to Romanticism. The results were as follows: 1. The Ideal Beauty of Body was found to be different throughout history and to be intimate- ly linked with fashionable dress. 2. The Form of Dress consisted of four basic components: The form of body itself, the form of clothing itself, the method of wearing, and the relationship between body and clothing. 3. The standards for classification of body form were body structure, body type, body proportion, posture, and movement. Clothing form was generally classified into flat type (unstructured type) and three dementional type (structured type); flat type was subclassified into draped type and tunic type. The method of wearing was classified into attached type, tying-up type, wrap·around type, pull-over type, open type and plastistic type. The relationship between body and clothing after wearing was generally classified into body priority type and clothing priority type. The clothing priority type was further divided into body exaggeration type and body concealment type; Body exaggeration type was further divided into upward type, downward type, forward type, backward type, right type and constriction type. 4. The pursuit of venus coelestis, metaphysical body part, ectomorphic body type, flat type clothing, body priority type; the pursuit of Venus Naturalis, physical body part, endomorphic body type, three dementional type clothing, clothing priority type proved to be closely related respectively by the historical study on the Ideal Beauty of Body and the Form of Dress.

• 한국농촌건축학회논문집
• /
• 제20권2호
• /
• pp.11-18
• /
• 2018

The purpose of this study is to analyze the structure and use change of the private space according to the balcony expansion and use it as the data of plan design. According to Bay, front length/width ratio and the change of balcony space before and after expansion of space organization of house units were analyzed. Common characteristics of Flat type and Tower type are an increase of the frontage length of house units in an apartment, an increase of the number of front bay, and an increase of integrated LDK focusing on living room. A difference is that Flat type shows high frontage ratio, Bay figure, and spatial arrangement favorable to front openness and lighting. Flat type shows higher area distribution than Tower type in LDK area distribution located in at the plane center. Spatial expandability and visual openness of Flat type are more beneficial than those of Tower type in the planning, and a balcony extension of house units has developed to direction to open more. Tower type creates various block images through a combination of house units focusing on the core. Uses after balcony expansion are area expansion of a balcony-neighboring room, storage space, expansion and function improvement of the variable range, and specialized space different from a neighboring room. In addition, there is no escapable space except for a shelter, so unit plan should be prepared to prevent using it other space of a shelter and to solve moving line of two-way horizontal refuge and vertical refuge.

• 한국태양에너지학회 논문집
• /
• 제31권6호
• /
• pp.32-39
• /
• 2011

This study is about the installation of the solar cell modules. The solar cell modules are built by the tree-mimic structure, and the performance is compared with that of the flat-plate type solar cell module installation. The mathematical tree model, which was suggested by Fisher and Honda, is utilized to determine the location of the solar cell modules for the tree-mimic type. The experiment shows that the generated electric power of the flat-plate type is higher than that of the tree-mimic type by 30% for one month of July. This lower performance for the tree-mimic type comes from the shading effects among the solar cell modules. The theoretical calculation for the absorbed solar radiation on the two types of solar cell installation shows that the tree-mimic type is higher than the flat-plate type by 8.5%. The shading area for the tree-mimic model is calculated with time by using the 3D-CAD, which will be utilized for the optimization of the tree-mimic model in the future.

• 전기학회논문지P
• /
• 제65권2호
• /
• pp.142-150
• /
• 2016

This paper developed new manufacture process technology of slim type flexible flat lighting product used lower power white LED. Flexible flat lighting is applied to letter sign lighting, traffic lighting, interior wall lighting, flat lighting, aquarium back lighting, wreath light etc. Main manufacture process technology were developed drawing software for electronics circuit, inkjet electronic circuit pattern and inkjet white ink coating. For pattern printing it was utilized for piezoelectonic inkjet head printing technology. Also high vacuum pressure laminating technology was waterproofing for LED flat lighting protection. Hence, form process technology we were manufactured for flexible flat lighting product of the power 12 W, input voltage 48 V and plane size $480{\times}480mm$. It acquired a these validity from experiment results.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.21-26
• /
• 2004

This research presents a modeling and a manufacturing method of insert type milling cutters such as face cutter, flat endmill and ball endmill. The methods introduced in this paper adopts the multi-tasking 5-axis machining that is increasing machining accuracy of holder and position accuracy of bolting points. So this can be used in the basic document of the total package program that involves modeling and manufacturing module in various insert cutters.

• 대한수학회보
• /
• 제53권5호
• /
• pp.1457-1469
• /
• 2016

In this paper, we study a class of Finsler metric. First, we find some rigidity results of the dually flat (${\alpha}$, ${\beta}$)-metric where the underline Riemannian metric ${\alpha}$ satisfies nonnegative curvature properties. We give a new geometric approach of the Monge-$Amp{\acute{e}}re$ type equation on $R^n$ by using those results. We also get the non-existence of the compact globally dually flat Riemannian manifold.

• 대한족부족관절학회지
• /
• 제6권2호
• /
• pp.238-241
• /
• 2002

There are two types of flat foot, the one is congenital type and the other is acquired type. The treatments of flat foot are various and conservative treatment is general, except such as congenital talus. But, operative method is needed for treatment of failure of conservative method, severe deformity in X-ray, with tenderness in a juvenile period. We reported using Kalix implant for flat foot with pain and severe deformity.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.527-530
• /
• 2001

In this paper, the basic characteristics of flat fluorescent lamp using ultraviolet generate from gas discharge and powder type electrolyminescent display(P-ELD) using a phenomenon of the light emission eaused by the electrical field applied to phosphor are studied. The lamp is a simple structure with insulator layer, phosphor layer, and gas gap. Current(displacement current + discharge current) in flat fluorescent lamp using.