• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.7 no.3
• /
• pp.171-180
• /
• 2002

The temporal and spatial distributions of phosphorus have been investigated in the Gomso Bay, Korea. TP, PIP, TOP and DIP in sediment were found 548.8mg P kg$^{-1}$ , 426.1mg P kg$^{-1}$ , 122.6mg P kg$^{-1}$ , and 0.217mg P kg$^{-1}$ , respectively with a decreasing order of PIP>TOP>DIP. Any temporal or spatial trend has not been found on the distribution of TP in the sediment, except the high TP values near the mouth of Julpo-chun. We found seasonal patterns high TOP(28.90% of TP) and low TIP(71.10% of TP) in August, but low TOP(15.63% of TP) and high TIP(84.38% of TP) in November. There were three times higher DIP concentration in August than in November. Such case is probably not only due to the enhanced supply of DIP directly from the decomposition of organic matter from overlying water in summer, but also the released phosphate from the adsorbed particulate matter such as PIP under the low pH and Eh conditions at the subsurface layers of the sediment induced by the active microbial respiration of increased organic materials in summer. Primarily, the source of phosphorous from municipal sewage strongly influenced the early stage of the distribution of all the phosphorous in the Gomso tidal flat. Notwithstanding, through the processes of diagenesis in sediment, water temperature and organic contents probably functioned as the key parameters to control the temporal distributions of TOP, TIP and DIP in the Gomso tidal flat.

• Korean Journal of Heritage: History & Science
• /
• v.45 no.2
• /
• pp.72-99
• /
• 2012

Cheomseongdae, Korea's so-called "star-gazing tower" located in the former Silla Dynasty capital of Gyeongju, is generally believed to have maintained its original shape since its construction in 647. The stone structure was closely examined and measured by Gyeongju National Museum in 1962 and reexamined by Korean National Research Institute of Cultural Heritage in 2009. This research noted the following structural anomalies of Cheomseongdae. A corner of the top rectangle layer was broken diagonally in a form that can never be attributed to a natural cause. The four metal clamps under the top rectangle layer had been missing. Four grooves, with unknown usage, exist on the sides of the long rectangular stones projected out of the circular body at the second and third circular layers from the top. On the second circular layer from the top, there are three flat stones, less than a half as tall as their surrounding stones. The average height of the third circular layer from the top is only 23.5 cm, while the overall average of the entire 27 circular layers is 29.9cm. This research postulates that all these anomalies are due to prior destructions and improper restorations of the structure. The first destruction and restoration of Cheomsengdae was likely to have occurred before the mid 15th century. The damages might include a pavilion on the top of the structure and a stone with the name of the structure carved in. The Mongolian invasion in the 13th century was a most likely cause. After the restoration, the structure suffered at least another attack. The damages on the top layer and the missing iron clamps were due to the later attack. The grooves and flat stones were to house holding device that affixed certain objects to the outer surface of the circular body. The metal or stone objects might have faced upward at the four corners of Chemseongdae, bridging the gaps between the rectangle layers and circular layers. The current Chemseongdae lost at least the four affixed objects, four holding devices, and one flat stone.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1114-1116
• /
• 2002

The characteristics of voltage drop and THD for parallel operating 11 PCRs (Phase Controlled Rectifiers) are analysed. The PCRs are used to drive high current (1.6 kA ${\sim}$ 3.7 kADC) electromagnetic coils for electromagnets. All the PCRs operate simultaneously in pulsed mode, and the pulse shot occurs every 150 seconds. During the pulse operation the PCR output current ramps up for 4 seconds, and then keeps flat top state for 2 seconds, and finally ramps down for 4 seconds. For the flat top mode a severe voltage drop and distortion appear in the power system because transformers for the PCRs are designed considering pulsed mode operation. It is expected that the analysis method can be applied to improve the system performance including power factor and design of high power pulsed mode operating power supply systems.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.17 no.2
• /
• pp.67-85
• /
• 2013

Reproducing Polynomial Particle Method (RPPM) is one of meshless methods that use meshes minimally or do not use meshes at all. In this paper, the RPPM is employed for free vibration analysis of shear-deformable plates of the first order shear deformation model (FSDT), called Reissner-Mindlin plate. For numerical implementation, we use flat-top partition of unity functions, introduced by Oh et al, and patchwise RPPM in which approximation functions have high order polynomial reproducing property and the Kronecker delta property. Also, we demonstrate that our method is highly effective than other existing results for various aspect ratios and boundary conditions.

• Laser Solutions
• /
• v.15 no.2
• /
• pp.11-14
• /
• 2012

In this paper, we have made a proposal concerning the beam shaping mask(BSM) using random-array slits to control intensity distribution profile of laser beam and demonstrated its proprieties experimentally. When a lot of slits are set out irregularly, diffraction patterns of light does not appear but granularity patterns as a bundle of fibers appear. Intensity distribution profile is controlled by densities distribution of circular slits arrayed randomly because the number of slits and its area means amount of light energy through BSM. Namely as the number of slits in high intensity area is increased and that in low intensity area decreased, amount of light energy is same over all local parts. So gaussian intensity distribution could be changed to flat-top.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.257-259
• /
• 1998

The Switched Reluctance Motor (SRM) has good properties to the adjustable speed control. But, high torque ripple and noise decrease this merit and make unstable state. Also, because of the saturation in the magnetic circuit, it is difficult to predict the inductance profile. If the inductance pronto is known, it's possible to make flat-top torque by applying some control strategy. This paper suggests method to develope flat-top torque using a Artificial Neural Network(ANN) method that can calculate a nonlinear inductance profile.

• The Korean Journal of Quaternary Research
• /
• v.20 no.1 s.26
• /
• pp.1-8
• /
• 2006

Many boring investigations were achieved in Youngjong-North tidal flat to construct the Incheon International Airport Expressway. Vertical sedimentary profile of this tidal flat has been studied by analyzing these boring data. The deposits of Youngjong-North tidal flat are about 30 meters thick, and the sedimentary layers consist of basal gravel, lower mud, middle silt, middle mud, and upper silt layers in ascending order. Semi-consolidated and oxidized belt with yellowish brown color, which appears above or within middle mud layer, exists in $-3{\sim}-5$ meters altitude. There are some stratigraphical problems to admit the top surface of this oxidized belt as the unconformity surface between Holocene and Pre-Holocene tidal flat deposit.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.5
• /
• pp.398-410
• /
• 2001

The flow and heat transfer characteristics for three-dimensional mixed convection flows in a radiator flat tube with U--shaped grooves are analyzed numerically. The flow and temperature fields are calculated by using the modified SIMPLE algorithm for irregular geometry. One tube specification among the various flat tube exchangers is recommended by considering the heat transfer and pressure drop. The effects of variation of coolant flow conditions and external air conditions on the flow and the thermal characteristics for the selected tube are investigated. the results show that inlet velocity of coolant flow is the very important factor in heat transfer and pressure drop, and top side is better position than the others as fin cleave to tube.

• Journal of the Semiconductor & Display Technology
• /
• v.5 no.3 s.16
• /
• pp.23-27
• /
• 2006

Recently, Top emission organic light-emitting diode (TEOLED) has been attracted by their potential application for the development of flat panel display (FPD). We have fabricated the high luminance top emission organic-emitting diode (TEOLED) using dual cathode layer and three top emitting structure. These devices were characterized by electroluminescence (EL) and current density-voltage (J-V) measurements. After compared it with Au anode structure, luminance of the device using dual anode was better than using without Al device. Consequently, Al layers are very good candidates for a promising electron-injecting buffer layer for top emission light-emitting diode (TEOLED).

• 한국태양에너지학회:학술대회논문집
• /
• 2012.03a
• /
• pp.480-487
• /
• 2012

The application of solar energy in residential building is general and natural in today. And application methods of solar thermal energy is divided in two kind of form, single evacuated tube and flat-plate form. Then in this study, the efficiency of single evacuated tube and flat-plate system is compared by total and effective area considering the time receiving the solar radiation between 24 hours and the specific time(10:00~15:00). As a result of the experiment, single evacuated tube and flat-plate collector's efficiency is varied by the quantity of solar radiation. And especially, the flat-plate system is more affected by outdoor temperature. Therefore the application of solar thermal system should be considered the solar radiation and outdoor temperature.