• 태양에너지
• /
• 제9권2호
• /
• pp.3-13
• /
• 1989

This study has been conducted to measure the performance of 5 thermosyphon solar water heaters suitable for Korean climate and to develop the most optimum system. Each system consists of two flat plate collectors of $4'{\times}8'$ (or three flat plate collectors of $3'{\times}6'$) connected in parallel and a storage tank of $300{\ell}$ capacity. Among the tested systems, the configuration that has two flat plate collectors of $4'{\times}8'$ and a horizontal tank-in-tank type storage unit with internal fins (C system) showed the highest performance.

• 한국정밀공학회지
• /
• 제19권1호
• /
• pp.99-106
• /
• 2002

For the development of a ultra-precision CNC polishing system including on-machine measurement system, we study a corrective polishing algorithm. We calculated unit removal profiles for various flat type polishing tools and polishing tool positions. Using these results we simulate the corrective polishing process based on dwell time control. We calculate dwell time distributions and residual error of the polishing simulation method and the FFT calculation method. We test corrective polishing algorithm with an optical glass. The target removal shape is a sine wave that has amplitude 0.3 micro meters. We find this polishing process has a machining resolution of nanometer order and is effective for sub-micrometer order machining. This result will be used for the software development of the CNC polishing system.

• 한국석유지질학회지
• /
• 제10권1_2호
• /
• pp.10-17
• /
• 2004

한국 서남해안에 위치한 두우리 조간대는 사주와 보호섬이 존재하지 않고 외해로 열려있는 전형적인 개방형 조간대이다. 이러한 개방형 조간대에서는 바람에 의한 파랑이 퇴적작용에 중요한 요소의 하나이므로, 계절에 따른 파랑에너지의 차이가 조간대 표층퇴적물의 분포와 퇴적구조의 특성에 직접적으로 반영된다. 두우리 조간대는 상부의 조수해빈 (tidal beach), 중부의 전형적인 조간대 (intertidal flat)와 최하부의 니질대 (lowermost mudflat)로 구분된다. 이러한 구분은 표층퇴적물의 구성뿐만 아니라 조간대의 경사도에 의한 구분과도 일치한다. 조간대 내에서의 퇴적물은 1차 퇴적구조와 사서질 퇴적물의 함량에 따라 다시 사질 조간대, 혼합 조간대와 니질조간대로 나누어진다. 두우리 조간대의 표층퇴적상은 계절에 따라서 퇴적물의 함량과 퇴적구조에 변화를 보이며, 퇴적상의 변화양상은 계절풍의 방향과 세기, 폭풍과 밀접한 관련이 있다. 북서계절풍이 강한 겨울철과 봄철에는 사질 조간대의 퇴적상이 우세하며, 약한 남동풍이 우세한 여름철에는 니질 조간대의 퇴적상이 우세하게 분포한다. 가을철에는 혼합 조간대가 우세하게 나타난다. 표층퇴적물은 여름에는 전 조간대가 약 20 cm 두께의 니질 퇴적물로 뒤덮이고 가을이 지나 겨울로 가면서 니질 퇴적상에서 사질 퇴적상으로 바뀐다. 이러한 표층퇴적상의 변화는 바람도 세어지고 풍향도 바뀌어 조간대를 공격하는 파랑의 에너지가 강해지면서 여름철에 퇴적되었던 니질 퇴적물을 침식시키기 때문이다. 캔코아 주상시료에서 퇴적구조는 여름철에는 조간대 상부 ($0{\~}l.3 {\cal}km$)에서는 니질 퇴적물의 평행엽층리와 상승연흔 사엽층리가 하부 $(1.7{\~}2.3 {\cal}km)$에서는 괴상의 니질 퇴적층이, 겨울철에는 전체적으로 평행엽층리와 연흔사층리가 우세하게 나타나며, 부분적으로 둔덕사층리 (HCS)가 나타난다.

• 대한원격탐사학회지
• /
• 제21권5호
• /
• pp.405-415
• /
• 2005

It is difficult to classify tidal flat surface that is composed of a mixture of mud, sand, water and microphytobenthos. We used a Linear Spectral Unmixing (LSU) method for effectively classifying the tidal flat surface characteristics within a pixel. This study aims at 1) detecting algal mat using LSU in the Saemangeum tidal flats, 2) determining a suitable end-member selection method in tidal flats, and 3) find out a habitual characteristics of algal mat. Two types of end-member were built; one is a reference end-member derived from field spectrometer measurements and the other image end-member. A field spectrometer was used to measure spectral reflectance, and a spectral library was accomplished by shape difference of spectra, r.m.s. difference of spectra, continuum removal and Mann-Whitney U-test. Reference end-members were extracted from the spectral library. Image end-members were obtained by applying Principle Component Analysis (PCA) to an image. The LSU method was effective to detect microphytobenthos, and successfully classified the intertidal zone into algal mat, sediment, and water body components. The reference end-member was slightly more effective than the image end-member for the classification. Fine grained upper tidal flat is generally considered as a rich habitat for algal mat. We also identified unusual microphytobenthos that inhabited coarse grained lower tidal flats.

• Journal of Mechanical Science and Technology
• /
• 제18권3호
• /
• pp.379-387
• /
• 2004

A novel flatness sensing system which is called the Flatness Sensing Inter-stand Looper(FlatSIL) system is suggested and a self-tuning PI control system using the FlatSIL is designed for improving the flatness of hot strip in finishing mill processes. The FlatSIL system measures the tension along the direction of the strip width by using segmented rolls, and the tension profile is approximated through the tension of each segmented roll. The flatness control system is operated by using the tension profile. The proposed flatness control system as far as the tension profile-measuring device works for the full strip length during the strip rolling in finishing mills. The generalized minimum variance self-tuning (GMV S-T) PI control method is applied to control the flatness of hot strip which has a design parameter as weighting factor for updating the PI gains. Optimizing the design parameter in the GMV S-T PI controller, the Robbins-Monro algorithm is used. It is shown by the computer simulation and experiment that the proposed GMV S-T PI flatness control system has better performance than the fixed PI flatness control system.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2007년도 공동학술대회 논문집
• /
• pp.251-256
• /
• 2007

The aim of this paper is development of resistivity seismic dilatometer (RSDMT) system. The resistivity module for obtaining apparent resistivity depth plot and seismic module for obtaining shear wave velocity (Vs) depth plot are attached to the conventional flat dilatometer testing equipment. From shear wave velocity profile, the stiffness at low strains of a site can be evaluated in undisturbed condition. And the resistivity value contains some information about water content and mineral characteristics of clayey soil. Specially manufactured resistivity and seismic modules were connected between commercialized DMT blade and drilling rod. To enhance reliability and repeatability of RSDMT test, automatic testing system including notebook based data acquisition system and automatic surface source system were developed. RSDMT system can be performed rapidly and can obtaine more reliable data at the same point compared with the separated testing system. The verification studies for the developed RSDMT system are going to be performed. From these studies, the effectiveness of integrated hybrid testing system will be checked in light of proper evaluation of geotechnical design parameters of clayey soils.

• 천문학논총
• /
• 제23권2호
• /
• pp.47-52
• /
• 2008

We have performed the flat-fielding correction for the $H{\alpha}$ full-disk monitoring system of KASI (Korea Astronomy and Space Science Institute), which is installed in the Solar Flare Telescope (SOFT) at the top of Bohyun Mountain. For this, we used a new method developed by Chae (2004), to determine the flat pattern from a set of relatively shifted images. Using this method, we successfully obtained the flat pattern for $H{\alpha}$ full-disk observations and compared our result with the image observed in Catania Astrophysical Observatory. The method that we used in this study seems to be quite powerful to obtain the flat image for solar observations. In near future, we will apply this method for the flat-fielding correction of all solar imaging instruments in KASI.

• Earthquakes and Structures
• /
• 제7권5호
• /
• pp.735-751
• /
• 2014

In the previous paper, authors proposed the unified equivalent frame method (UEFM) for the lateral behavior analysis of the flat plate structure subjected to the combined gravity and lateral loads, in which the rotations of torsional members were distributed to the equivalent column and the equivalent slab according to the relative ratio of gravity and lateral loads. In this paper, the lateral behavior of the multi-span flat plate structures under various levels of combined gravity and lateral loads were analyzed by the proposed UEFM, which were compared with test results as well as those estimated by existing models. In addition, to consider the stiffness degradation of the flat plate system after cracking, the stiffness reduction factors for torsional members were derived from the test results of the interior and exterior slab-column connection specimens, based on which the simplified nonlinear push-over analysis method for flat plate structures was proposed. The simplified nonlinear analysis method provided good agreements with test results and is considered to be very useful for the practical design of the flat plate structures under the combined gravity and lateral loads.

• 지질공학
• /
• 제31권3호
• /
• pp.333-342
• /
• 2021

본 연구에서는 기존의 전통적인 다짐관리방법의 문제점을 보완하고자 TDR(Time Domain Reflectometry)을 이용하여 지반의 함수비와 건조단위중량을 측정하는 연구를 수행하였다. Flat TDR 시스템은 지반의 교란을 일으키기 않는 장비로써 측정값을 검증하기 위하여 주문진표준사 외 7개소의 현장대상 지반의 시료에 대하여 건조밀도와 함수비를 측정하였다. 함수비구간은 3, 6, 9, 12, 15, 18%의 6개 구간으로 나누어 측정을 하였으며 실험결과는 통일분류법에 따라 확인하였다. 실내실험 결과, 함수비는 SP시료의 경우 약 0.7%, SM시료의 경우 약 1.3%의 오차를 보였다. 또한 건조단위중량은 SP시료의 경우 약 7%, SM시료의 경우 약 5%의 오차를 확인하였다. 이는 점토나 자갈을 제외한 모래 또는 실트질 모래 지반에서는 안정적인 값을 도출함을 확인할 수 있었다. 실험 결과를 통하여 Flat TDR 시스템의 측정값이 기존의 전통적인 다짐관리방법과 유사한 값을 도출하는 것을 확인할 수 있었고 이는 빠른 시공성과 경제성을 필요로하는 건설현장에서 Flat TDR 장비가 적합하다는 것을 판단할 수 있었다.

• 한국산학기술학회논문지
• /
• 제14권12호
• /
• pp.6521-6526
• /
• 2013

판형보강재의 강성 및 세장비의 영향이 보강판시스템의 면내압축강도에 미치는 영향을 살펴보기 위해 탄성 및 비탄성 극한강도해석이 수행되었다. 탄성좌굴해석에서는 보강재의 국부좌굴현상이 고려될 수 없지만 보강재의 강성이 일정정도 확보되면 역대칭모드 좌굴형상이 발생되면서 보강판의 면내압축강도가 확보되는 것으로 파악되었다. 초기결함 및 잔류응력이 고려된 극한강도해석에서는 초기결함의 모드형상이 극한강도에 민감하게 영향을 미친다는 사실이 확인되었다. 도로교설계기준에서 제시하는 판형보강재의 세장비제한은 해석 결과와 비교하였을 때 보수적인 수치로 평가되었다.