The morphological development of lungs in fetuses of 60, 90 and 120 days of gestation and neonates of Korean native goats was investigated by light, scanning and transmission electron mictroscope. The results were summarized as follows ; 1. Gross findings ; In the 60-days-old fetus, the lung was developed and differentiated into six lobes. 2. Light microscopic findings : The gland-like bronchioles were formed in loose mesenchyme at 60 days of gestation and the bronchial wall contained smooth muscles. The loose mesenchyme had been replaced by compact parenchymal tissue at 90 days of gestation and the cartilage plates appeared in bronchial wall which contained blood vessels, submucosal glands and smooth muscles. The lung parenchyma consisted of a fine network of alveoli at 120 days of gestation and the bronchial wall contained well-developed blood vessels, submucosal glands, cartilage plates and smooth muscles. In neonates, the lung tissue was similar to the mature lung tissue and the bronchial wall contained well developed cartilage plates. 3. Scanning electron microscopic findings : The epithelial cells lining the tubules were composed of cuboidal or columnar at 60 days of gestation and the epithelial cells lining the large airways were often ciliated : some were covered with stubby microvilli. The epithelial cells lining the canals were cuboidal at 90 days of gestation and the epithelial cells lining the bronchioles were ciliated cells or nonciliated(clara) cells, The clara cells contained row microvilli. The alvealor development of this stage was rapidly progressed ; the subdivision of canals by alveolar crests and assosiated wall attenuation resulted alveoli at 120 days of gestation and the respiratory bronchioles were lined by ciliated or nonciliated epithelial cells. In neonates, the epithelial cells lining the alveolar walls were mainly covered with pneumocyte type I ; Some were covered with pneu-mocyte type II. 4. Transmission electron microscopic findings : The epithelial cells lining the tubules were adhered with tight junction at apical borders of the adjacent cells at 60 days of gestation, which contained few organells and glycogen. The epithelial cells lining the canals were composed mostly of cuboidal cell at 90 days of gestation and the epithelial cells lining of the bronchioles were ciliated of nonciliated cell, which contained few organelles and abundant glycogen. The epithelial cells lining the alveolar walls were composed of pneumocyte type I and a few pneumocyte type II at 120 days of gestation. The epithelial cells lining of the bronchioles were ciliated or nonciliated cells. In neonates, pneumocyte type I was observed as flat and thin cytoplasmic extension in shape. Otherwise, pneumocyte type II was observed as cuboidal type with apical microvilli and contained osmiophillic lamellar inclusion bodies. Putting these various experiment results together, the lung development was slowly progressed at early stage, which was rapidly progressed in the late stage of gestation.
인쇄기판의 양산 신뢰성 확인을 위한 전기검사에서는 다수의 미세 탐침들이 기판의 패드와 접점을 유지하며 회로의 전기적 신뢰성을 확인하는 검사이다. 이 때 다수의 탐침들이 모두 정 정렬 될 수 없으므로 탐침의 충돌하는 위치와 각도는 기판에 심각한 결과를 초래할 수 있다. 본 연구에서는 탐침이 패드와 충돌하는 상황에서 발생할 수 있는 탐침의 미끄러짐 현상을 관측하고자 한다. 탐침은 접촉부가 둥근형상과 평평한 형상의 두 종류를 선정하였고, 탐침 돌출 길이, 탐침 직경, 이송 속도 등이 탐침의 미끄러짐에 주는 영향을 관찰하였다. 이를 통해 전기 검사 시 탐침의 경사에 따라 기판의 패드에 작용하는 수평 인가력과 탐침 경사각 사이의 관계를 조사하였으며, 또 전기 검사 후 미끄러진 탐침의 복원시 발생할 수 있는 탐침과 패드 사이의 역학관계에 대해서도 고찰하였다. 경사각은 탐침의 접촉부가 평평하면서 돌출길이가 짧고, 직경이 크며, 검사 속도가 느린 경우에 작다는 것을 확인하였다.
This study is to provide basic information on clothing fitness necessary to develop apparel products for Korean companies that want to enter or have already made inroads into the Chinese market. In an effort to serve this purpose, a standard upper torso body model for Chinese women was established by applying the Rohrer Index and Size Designation of Clothes - Women of GB/T 1335.2-1997 to Chinese women in their 20s to determine body types and its characteristics. First, according to the result of applying the Rohrer Index to categorize body types, Type 1 showed the longest vertical body length and a short horizontal length with the lowest degree of flatness. Type 2 was a standard body type with a height of 158.73cm, weight of 53.02kg and the Rohrer Index of 1.32. Type 3 had a thick and flat body shape that had the highest degree of flatness and the shortest vertical length in its upper torso among all three types of body. Second, F-test was conducted on 4 distinctive body types obtained from comparing obesity scores to verify differences in body shapes for different degree of obesity. The test result indicated significant differences in 3 of the 4 body types and showed different structural components for different degree of obesity. Third, the result of comparing correlational distributions of body types and height range, and body types and degree of obesity for all and specified age groups revealed that about 33.30% of the body types appeared in Type2-A followed by 20.18% in Type1-A, 18.40% in Type2-Y and 7.91% in Type1-Y respectively. Body types and degree of obesity for two different age groups were most frequent in Type2-A. For the group of young women in their early 20s appeared the most in Type2-A, Type1-A, Type2-Y and Type 1-Y respectively and young women in late 20s were frequent in the order of Type2-A, Type2-Y, Type1-A and Type1-Y.
Apoptosis is the ability of cells to self-destruct by the activation of an intrinsic cellular suicide program when the cells are no longer needed or when they are seriously damaged. Morphologically, apoptosis is characterized by the appearance of membrane blebbing, cell shrinkage, chromatin condensation, DNA cleavage, and the fragmentation of the cell membrane-bound apoptotic bodies. Siegesbeckia glabrescens Makino (Siegesbeckiae Herba, SG) has been widely used as treatments for arthritis, and fever, as well as detoxification properties. The present studies were undertaken to evaluate if SG has an anti-apoptotic property. Cell viability was measured by XTT and tryphan blue stain. Morphological characteristic of human aortic smooth muscle cells(HASMC) were visualized with a phase-contrast microscope. SG significantly reduced HASMC, but not human umbilical vein endothelial cell(HUVEC), viability in a dose-dependent manner. Confluent untreated cells at 24hrs showed normal morphology, flat with a uniform polygonal shape. SG-treated cells (0.5㎎/㎖) at 24hrs showed apoptotic morphology. Cells became irregular with elongated lamellipodia, and exhibited condensed chromatin in nuclei with occasional endoucleation. There was an increase in the number of apoptotic cells rounding-up and being detached from the substrate. TUNEL staining of SG-treated cells showed dark-brown stains in nuclei and cytosol. Caspases are central components of the machinery responsible for apoptosis and are generally divided into two categories; the initiator caspases, which include caspases-2,-8,-9, and -10, and the effector caspases, which include caspases-3,-6, and -7. SG decreased anti-caspase-3 protein expression, which means activation of caspases-3 activity. It has been reported that there is a link between NO formation and apoptosis. NO production was accelerated by SG treatment in HASMC. L-NNA, NOS inhibitor, inhibited SG-induced apoptosis. These results, therefore, indicated that both caspases-3 and NO production are involved in apoptosis in smooth muscle cells. According to these results, SG may have a potential effect in the treatment of hypertensive atherosclerosis.
국립중앙박물관에서는 수장고에 보관 중이던 미등록 유물들을 연차적으로 등록하는 사업을 진행하던 가운데 복원 작업이 시작된 금강사지 출토 대형 토기편을 설명하고 전반적인 보존처리과정을 소개하고자한다. 대형 토기는 총 600여점을 40여개의 유물상자에 파손된 상태로 별도 보관하고 있었으며 형태나 크기, 사용 용도, 그리고 몇 개의 토기인지를 전혀 파악할 수 없는 상태였다. 수 많은 토기 조각과 토기 무게로 인해 우선 재질별, 토기 두께와 표면 색감, 그리고 유약 광택도 등 가시적 특징만으로 크게 6개의 토기 편으로 가분류하였으나, 가접합 해 본 결과, 실제로는 한 개의 토기 편임을 알 수 있었다. 이번 복원 과정에서는 매우 크고 무거운 기형의 토기를 접합할 때도 일반적으로 사용되는 순간접착제가 과연 안전한지를 알아보고자 먼저, 예비 실험을 통해 저점도~고점도별 접착속도와 접착강도, 그리고 용해속도를 조사하여 안전성을 확인하였다. 접합 후 결손된 부분의 형태에 따라 다양한 종류의 에폭시 수지를 사용하여 복원하였으며 저부가 편평하지 않고 동그란 형태여서 제대로 서있지 않아 유물을 안정하게 보관하면서도 전시에 바로 사용하도록 전시받침대까지 제작하였다.
1. 한국에서 재배된 영지의 일반 성분을 분석한 결과, 수분 14.6 %, 회분 2.0 %, 조 지방 3.3 %, 조 단백 질 23.6 %, 조 섬유 59.0 %이었다. 9 종의 환원당 중 maltose가 9.2 mg/g으로써 가장 많았다. alanine을 비롯한 17 종의 유리 아미노산이 함유되어 있었다. 열수 추출액의 pH는 $4.1{\sim}4.2$ 이었다. 2. 주사 전자 현미경으로 2 종류의 재배 영지의 포자 표면의 미세 구조를 관찰하여 본 결과, 차이점이 없었으며 그 크기는 장경(長 徑) $6.3{\sim}7.1\;{\mu}m$, 단경(短徑) $3.5{\sim}4.3\;{\mu}m$, 두께 $2.0{\sim}2.5\;{\mu}m$이었다. 표면의 오목한 부분은 직경(直徑) $0.4{\sim}0.5\;{\mu}m$의 원형이다. 3. Sarcoma-180을 이식한 마우스에 대한 영지의 수명 연장 효과는 Fraction A가 131.7 %, Fraction B가 162.5 %, Fraction C가 141.7 %이었다. 4. Fraction B를 40 mg/kg의 용량으로 5 일간 마우스에 투여하였을 때, 지연형 과민만응이 대조군에 비하여 66.7 %로 회복되었다.
자기조립화된 Fe/Au 이중층 위에 $L1_0$형 구조를 갖는 FePd 나노 점을 성공적으로 제작하였다. AFM를 이용하여 초기에 편평한 Fe/Au 이중층 박막이 온도가 증가함에 따라서 응집되어 나노 점 구조로 변형되는 것을 확인하였다. 또한 형성된 이중층위에 FePd 다층막을 $300^{\circ}C$, $350^{\circ}C$, $400^{\circ}C$, $450^{\circ}C$에서 각각 증착하였다. 초격자 구조를 갖는 FePd 다층막의 표면형상은 응집현상에 의하여 자기조립화된 이중층의 형상과 유사하였다. XRD 측정결과, $350^{\circ}C$ 이상에서 열처리된 FePd 다층막은 $L1_0$형 구조를 갖는다는 것을 확인하였다. 그리고 박막두께에 따른 XPS 측정결과는 전체 박막의 화학적 조성이 증착순서와 일치하는 것을 보여주었다. 결과적으로 추가적인 식각공정 없이 화학적으로 규칙화된 FePd 초격자 나노 점의 제작에 성공하였다.
본 논문은 강관과 콘크리트가 함께 축력에 저항하는 합리적인 콘크리트 강관구조형식에 대해 무피복상태에서 내화성능을 높이는 연구이다. 콘크리트 강관구조는 내부 콘크리트로 인한 열저항 성능이 매우 우수하지만, 국내에서는 일정시간 동안 내화성능을 확보하도록 규정하고 있는 내화구조시스템으로 피복처리가 되지 않는 상태에서는 활발하게 적용되지 못하고 있다. 따라서 콘크리트충전 강관구조 기둥의 구조성능을 향상시키기 위하여 강관 내측면에 부착하는 리브요소를 개발하고 그것의 효과적인 형상을 개발하는 연구로서 콘크리트 강관기둥 내측면에 Corrugated Rib를 부착하여 구조적압축 및 좌굴 저항능력을 향상시키는 CFT 시스템을 개발하고자 한다. 이에 대한 연구 결과, 강관 내면 부착 리브의 적용으로 내화시 CFT 기둥의 내력상승에 의한 좌굴방지를 확인하였고, 내화성능기준 또한 만족하였다. 따라서 본 연구를 통해 개발된 강재리브(Corrugate rib)구조 보강재를 활용한 CFT의 공법은 내화피복 없이 구조 및 내화성능을 만족시키는 것으로 판단된다. 향후 rib의 다양한 형태를 변수로 하는 연구와 공장생산에서 공정을 효율화 시키고, 경제성 있는 시스템으로 활용할 수 있도록 추가 연구가 필요할 것으로 판단된다.
프레스금형(press dies)에 의한 굽힘가공(bending work) 이라는 것은 평평한 블랭크(blank)를 필요로 하는 각도(角度)로 굽히는 것이다. 굽힘가공을 하면 굽혀진부분(flange)과 굽혀지지 않은 부분(web)으로 구분되며, 굽힘라인(bending line) 부분에는 굽혀진 각도(bending angle)와 굽힘반지름(bending radius)이 내측과 외측으로 성형된다. 이때, 내측 굽힘반지름의 크기는 제품의 재질별로 최소치수가 제시 된다. 제시된 최소치수 보다 작게 굽히면 절단면 굽힘부위에 덧살이 발생 하거나 외측 굽힘반지름 부위에는 균열(crack)이 생긴다. 굽힘가공에서의 외측 굽힘반지름은 자연적으로 생긴다. 그래서 외측 굽힘반지름 치수를 굽힘펀치와 다이블록으로 조정하면서 필요한 치수로 굽힐수 없다. 굽힘가공에는 V-굽힘, U-굽힘, Z-굽힘, O-굽힘, P-굽힘, 에지굽힘(edge bending), 트위스트굽힘(twist bending), 크림핑(crimping) 등이 있다.이 중에서 Z-굽힘은 굽힘라인이 2개로써 블랭크의 상면(上面)과 하면(下面)에 설정하여 상향(上向)굽힘이나 하향(下向)굽힘으로 작동되는 금형을 사용한다. Z-굽힘을 크랭크굽힘(crank bending) 이라고도 한다. 이런 구조의 금형으로 Z-굽힘가공을 하면 내측반지름은 표준치수로 굽혀진다. 표준치수라는 것은 굽힘가공에서 굽힐 수 있는 최소 굽힘반지름 치수로서 굽힘펀치의 각(角)반지름(Rp)를 뜻한다. 그런데 산업현장에서는 외측 굽힘반지름 치수를 굽힘펀치와 다이블록으로 굽힐수 없는 미세한 샤프에지(sharp edge) 형상인 매우 작은 치수(R=0.2mm)를 필요로하고 있는 바, 본 논문에서는 외측 굽힘반지름 치수를 0.2mm 이하로 굽힐수 있는 Z-굽힘가공 공법을 개발 하고자 하였다.
한국결정성장학회 1996년도 The 9th KACG Technical Annual Meeting and the 3rd Korea-Japan EMGS (Electronic Materials Growth Symposium)
/
pp.522-522
/
1996
An investigation of the effects of transverse magnetic field and Peltier effect on melt convection and macrosegregation in vertical Bridgman crystal grosth of Te doped InSb was been carried out by means of microstructure observation, Hall measurement, electrical resistivity measurement and X-ray analysis. Before the experiments, Interface stability, convective instability and suppression of convection by magnetic field were calculated theoretically. After doping 1018, 1019 cm-3 Te in InSb, the temperature of Bridgman furnace was set up at $650^{\circ}C$. The samples were grown in I.D. 11mm, 100mm high quartz tube. The velocity of growth was about 2${\mu}{\textrm}{m}$/sec. In order to obtain the suppression of convection by magnetic field in the middle of growth, 2-4KG magnetic field was set on the melt. For searching of the shape of solid-liquid interface and the actual velocity of crystal growth, let 2A current flow from solid to liquid for 1second every 50seconds repeatedly (Peltier effect). The grown InSb was polycrystal, and each grain was very sharp. There was no much difference between the sample with and without magnetic field at a point of view of microstructure. For the sample with Peltier effect, the Peltier marks(striation) were observed regularly as expected. Through these marks, it was found that the solid-liquid interface was flat and the actual growth velocity was about 1-2${\mu}{\textrm}{m}$/sec. On the ground of theoretical calculation, there is thermosolutal convection in the Te doped InSb melt without magnetic field in this growth condition. and if there is more than 1KG magnetic field, the convection is suppressed. Through this experiments, the effective distribution coefficients, koff, were 0.35 in the case of no magnetic field, and 0.45 when the magnetic field is 2KG, 0.7 at 4KG. It was found that the more magnetic field was applied, the more convection was suppressed. But there was some difference between the theoretical calculation and the experiment, the cause of the difference was thought due to the use of some approximated values in theoretical calculation. In addition to these results, the sample with Peltier effect showed unexpected result about the Te distribution in InSb. It looked like no convection and no macrosegregation. It was thought that the unexpected behavior was due to Peltier mark. that is, when the strong current flew the growing sample, the mark was formed by catching Te. As a result of the phenomena, the more Te containing thin layer was made. The layer ruled the Hall measurement. The values of resistivity and mobility of these samples were just a little than those of other reference. It was thought that the reason of this result was that these samples were due to polycrystal, that is, grain boundaries had an influence on this result.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.