• 제목/요약/키워드: flat grain

검색결과 169건 처리시간 0.025초

경주 월성 해자 유적 출토 목제방패의 형태, 연대 및 수종분석을 통한 신라 방패의 기초적 연구 (A Fundamental Study of the Silla Shield through the Analysis of the Shape, Dating, and Species Identification of Wooden Shields Excavated from the Ruins of Wolseong Moat in Gyeongju)

  • NAM, Tae-Gwang;KIM, Hun-Suk
    • Journal of the Korean Wood Science and Technology
    • /
    • 제49권2호
    • /
    • pp.154-168
    • /
    • 2021
  • 경주 월성의 본격적인 발굴조사로 다양한 종류의 목제유물이 출토되고 있다. 특히 월성의 주위를 둘러싸고 있는 해자에서 다량 출토되었다. 본 연구에서는 월성 해자에서 출토된 목제방패 2점의 수종분석, 방사성탄소연대측정, 그리고 형태분석을 통해 신라시대 방패에 대한 기초자료를 확보하고자 하였다. 연대측정 결과, 4세기 중반에서 5세기 초반에 벌채된 목재를 사용하여 제작되었음이 확인되었다. 수종분석 결과, 유물의 몸체는 소나무속 연송류로, 손잡이는 느티나무속 느티나무로 식별되었다. 출토 목제방패의 제작 순서는 판목으로 가공된 판에 얇은 선으로 구획을 표시한 후 이중동심원을 구획하고 작은 구멍을 투공한 것으로 확인되었다. 구획선 사이의 간격을 측정한 결과 약 6cm로 일정하고, 붉은 색과 검은 색으로 채색되어 있다. 형태 분석을 통해 유물의 너비는 각각 50cm, 36cm 이상으로 추정했다.

열처리 방법에 따른 카본전극 페로브스카이트 태양전지의 특성 변화 (Properties of the carbon electrode perovskite solar cells with various annealing processes)

  • 송오성;김광배
    • 한국산학기술학회논문지
    • /
    • 제22권2호
    • /
    • pp.26-32
    • /
    • 2021
  • 카본 전극 페로브스카이트 태양전지의 광활성층을 형성하는데 열판, 오븐, 쾌속열처리로 방법을 달리하며 이때 광전기적 특성과 미세구조 변화를 확인하였다. Glass/FTO/compact TiO2/meso TiO2/meso ZrO2/perovskite/carbon electrode 구조의 페로브스카이트 태양전지 소자를 열판 공정, 오븐 공정, RTA(rapid thermal annealing) 공정을 이용하여 준비하였다. 이때 광전기적 특성과 미세구조를 solar simulator와 광학현미경, 장발산주사전자현미경을 이용하여 각 소자의 특성을 분석하였다. 광전기적 특성 분석 결과, RTA 공정을 이용하여 제작한 소자에서 가장 우수한 광전기적 특성을 확인할 수 있었다. 미세구조 분석 결과 열판 공정과 오븐 공정으로 제작한 시편은 카본 전극 상부에 과잉 페로브스카이트 상이 형성되고, RTA 공정으로 제작한 시편에서는 시편 상부에 과잉 페로브스카이트 상 없이, 균일한 페로브스카이트가 형성된 것을 확인할 수 있었다. 또한 단면 미세구조에서는 RTA 공정으로 제작한 소자가 다공성 카본 전극 층에 고밀도의 페로브스카이트 층을 형성하여 우수한 광전기적 특성을 나타내었다. 따라서 대면적 소자 제작의 공정시간을 고려한 새로운 열처리방안으로 RTA 방법의 채용 가능성을 확인하였다.

$In_2Se_3$$Cu_2Se$를 이용한 $CuInSe_2$박막제조 및 특성분석 (Fabrication and Characterization of $CuInSe_2$Thin Films from $In_2Se_3$ and$Cu_2Se$Precursors)

  • 허경재;권세한;송진수;안병태
    • 한국재료학회지
    • /
    • 제5권8호
    • /
    • pp.988-996
    • /
    • 1995
  • CdS/CuInSe$_2$태양전지의 광흡수층인 CuInSe$_2$박막을 In$_2$Se$_3$와 Cu$_2$Se 이원화합물을 precursor로 하여 진공증발법으로 제조하였고 특성을 분석하였다. 먼저 유리기판위에 0.5$\mu\textrm{m}$ 두께의 In$_2$Se$_3$를 susceptor온도를 변화시켜가면서 증착한 결과 40$0^{\circ}C$에서 가장 평탄하고 치밀한 박막이 형성되었다. 그 위에 Cu$_2$Se$_3$를 진공증발시켜 증착함으로써 in-situ로 CuInSe$_2$박막을 형성시키고 In$_2$Se$_3$를 추가로 증발시켜 CuInSe$_2$박막내에 존재하는 제 2상인 Cu$_2$Se를 제거시켰다. 이 경우 susceptor온도가 $700^{\circ}C$ 일때 미세구조가 가장 좋은 CuInSe$_2$박막이 형성되었으며 약 1.2$\mu\textrm{m}$ 두께에서 약 2$\mu\textrm{m}$의 결정립크기와 (112) 우선배향성을 가졌다. 추가 In$_2$Se$_3$양이 증가함에 따라 CuInSe$_2$박막의 조성편차보상으로 hole 농도가 감소하고 전기 비저항이 증가하였고, optical bandgap은 거의 일정한 값인 1.04eV의 값을 가졌다. Mo/유리기판 위에 증착한 CuInSe$_2$박막도 유리기판 위에 증착한 박막과 비슷한 미세구조를 가졌으며, 이 박막을 토대로 ZnO/CdS/CuInSe$_2$/Mo 구조를 갖는 태양전지 구현이 가능할 것으로 생각된다.

  • PDF

고흥 남성리 패류양식장의 지형 구조와 저서생물 현장 조사 (Topographic Placement(Structure) and Macro Benthos Community in Winter for the Shellfish Farm of Namsung-ri, Goheung)

  • 조영현;김윤;류청로;이경식;이인태;윤한삼;전수경
    • 해양환경안전학회지
    • /
    • 제16권2호
    • /
    • pp.175-183
    • /
    • 2010
  • 갯벌 패류양식장의 구조물 설치 및 지형적 공간배치에 따른 저서생물 현황을 파악하기 위해 고흥 남성리 양식장의 실제적인 사례를 조사하였다. 그 결과를 요약하면 다음과 같다. (1) 남성리 갯벌양식장의 지반 경사는 약 $1^{\circ}$ 미만으로 매우 평탄하며, 육지로부터 약 150 m까지는 $\sqcup$형, 그 후는 $\sqcap$형 지반형태를 가진다. $\sqcup$형 지반은 간출시 해수를 가두고 $\sqcap$형 지반은 외해 유출을 가로막을 뿐만 아니라 내부인자로서 해수 유출 시간을 지연시키는 작용/영향을 하게 될 것으로 생각된다. (2) 양식장 구분 시설물로 설치된 굴 패각 망태 또는 사석의 축제 형식은 총 5가지로 구분할 수 있으며, 양식장 대기 노출 시간과 침수시간은 각각 181분과 434분이었다. (3) 수치실험결과로서 대상해역의 내습 심해파랑은 최대파고 약 0.5m로서 매우 정온한 해역특성을 가지며, 탁월 입사파향은 나로대교 하단부는 S방향, 갯벌양식장 인근은 SE, SSW, S방향으로 조사되었다. (4) 고흥 남성리 주변 해역의 입도분석결과, 퇴적물은 Gravel 0.0~5.81(평균 1.70)%, 모래 14.15~18.39(평균 13.23)%, 실트 27.59~47.15(평균 30.84)%, 점토 35.79~55.73(평균 36.19)%로 구성되어 있으며, Folk 분류법에 의해 (g)M, sM(Sandy mud), gM(Gravelly mud)로 분류되었다. (5) 2010년 1월 남성리 패류 양식장 저서생물 현황조사에서는 총 11종이 1%이상의 우점종으로 출현하였으며 이 중 연체동물이 1종, 다모류가 8종, 갑각류가 2종이었다.

태양에너지를 이용한 곡물건조시스템의 시뮬레이션에 관한 연구 (Simulation of Drying Grain with Solar-Heated Air)

  • 금동혁;김용운
    • Journal of Biosystems Engineering
    • /
    • 제4권2호
    • /
    • pp.65-83
    • /
    • 1979
  • Low-temperature drying systems have been extensively used for drying cereal grain such as shelled corn and wheat. Since the 1973 energy crisis, many researches have been conducted to apply solar energy as supplemental heat to natural air drying systems. However, little research on rough rice drying has been done in this area, especially very little in Korea. In designing a solar drying system, quality loss, airflow requirements, temperature rise of drying air, fan power and energy requirements should be throughly studied. The factors affecting solar drying systems are airflow rate, initial moisture content, the amount of heat added to drying air, fan operation method and the weather conditions. The major objectives of this study were to analyze the effects of the performance factors and determine design parameters such as airflow requirements, optimum bed depth, optimum temperature rise of drying air, fan operation method and collector size. Three hourly observations based on the 4-year weather data in Chuncheon area were used to simulate rough rice drying. The results can be summarized as follows: 1. The results of the statistical analysis indicated that the experimental and predicted values of the temperature rise of the air passing through the collector agreed well. 2. Equilibrium moisture content was affected a little by airflow rate, but affected mainly by the amount of heat added, to drying air. Equilibrium moisture content ranged from 12.2 to 13.2 percent wet basis for the continuous fan operation, from 10.4 to 11.7 percent wet basis for the intermittent fan operation respectively, in range of 1. 6 to 5. 9 degrees Centigrade average temperature rise of drying air. 3. Average moisture content when top layer was dried to 15 percent wet basis ranged from 13.1 to 13.9 percent wet basis for the continuous fan operation, from 11.9 to 13.4 percent wet basis for the intermittent fan operation respectively, in the range of 1.6 to 5.9 degrees Centigrade average temperature rise of drying air and 18 to 24 percent wet basis initial moisture content. The results indicated that grain was overdried with the intermittent fan operation in any range of temperature rise of drying air. Therefore, the continuous fan operation is usually more effective than the intermittent fan operation considering the overdrying. 4. For the continuous fan operation, the average temperature rise of drying air may be limited to 2.2 to 3. 3 degrees Centigrade considering safe storage moisture level of 13.5 to 14 perceut wet basis. 5. Required drying time decrease ranged from 40 to 50 percent each time the airflow rate was doubled and from 3.9 to 4.3 percent approximately for each one degrees Centigrade in average temperature rise of drying air regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on required drying time. 6. Required drying time increase ranged from 18 to 30 percent approximately for each 2 percent increase in initial moisture content regardless of the fan operation methods, in the range of 18 to 24 percent moisture. 7. The intermittent fan operation showed about 36 to 42 percent decrease in required drying time as compared with the continuous fan operation. 8. Drymatter loss decrease ranged from 34 to 46 percent each time the airflow rate was doubled and from 2 to 3 percent approximately for each one degrees Centigrade in average temperature rise of drying air, regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on drymatter loss. 9. Drymatter loss increase ranged from 50 to 78 percent approximately for each 2 percent increase in initial moisture content, in the range of 18 to 24 percent moisture. 10. The intermittent fan operation: showed about 40 to 50 percent increase in drymatter loss as compared with the continuous fan operation and the increasing rate was higher at high level of initial moisture and average temperature rise. 11. Year-to-year weather conditions had a little effect on required drying time and drymatter loss. 12. The equations for estimating time required to dry top layer to 16 and 1536 wet basis and drymatter loss were derived as functions of the performance factors. by the least square method. 13. Minimum airflow rates based on 0.5 percent drymatter loss were estimated. Minimum airflow rates for the intermittent fan operation were approximately 1.5 to 1.8 times as much as compared with the continuous fan operation, but a few differences among year-to-year. 14. Required fan horsepower and energy for the intermittent fan operation were 3. 7 and 1. 5 times respectively as much as compared with the continuous fan operation. 15. The continuous fan operation may be more effective than the intermittent fan operation considering overdrying, fan horsepower requirements, and energy use. 16. A method for estimating the required collection area of flat-plate solar collector using average temperature rise and airflow rate was presented.

  • PDF

태양에너지를 이용한 곡물건조시스템의 시뮬레이션에 관한 연구 (Simulation of Drying Grain with Solar-Heated Air)

  • 금동혁
    • Journal of Biosystems Engineering
    • /
    • 제4권2호
    • /
    • pp.64-64
    • /
    • 1979
  • Low-temperature drying systems have been extensively used for drying cereal grain such as shelled corn and wheat. Since the 1973 energy crisis, many researches have been conducted to apply solar energy as supplemental heat to natural air drying systems. However, little research on rough rice drying has been done in this area, especially very little in Korea. In designing a solar drying system, quality loss, airflow requirements, temperature rise of drying air, fan power and energy requirements should be throughly studied. The factors affecting solar drying systems are airflow rate, initial moisture content, the amount of heat added to drying air, fan operation method and the weather conditions. The major objectives of this study were to analyze the effects of the performance factors and determine design parameters such as airflow requirements, optimum bed depth, optimum temperature rise of drying air, fan operation method and collector size. Three hourly observations based on the 4-year weather data in Chuncheon area were used to simulate rough rice drying. The results can be summarized as follows: 1. The results of the statistical analysis indicated that the experimental and predicted values of the temperature rise of the air passing through the collector agreed well.2. Equilibrium moisture content was affected a little by airflow rate, but affected mainly by the amount of heat added, to drying air. Equilibrium moisture content ranged from 12.2 to 13.2 percent wet basis for the continuous fan operation, from 10.4 to 11.7 percent wet basis for the intermittent fan operation respectively, in range of 1. 6 to 5. 9 degrees Centigrade average temperature rise of drying air.3. Average moisture content when top layer was dried to 15 percent wet basis ranged from 13.1 to 13.9 percent wet basis for the continuous fan operation, from 11.9 to 13.4 percent wet basis for the intermittent fan operation respectively, in the range of 1.6 to 5.9 degrees Centigrade average temperature rise of drying air and 18 to 24 percent wet basis initial moisture content. The results indicated that grain was overdried with the intermittent fan operation in any range of temperature rise of drying air. Therefore, the continuous fan operation is usually more effective than the intermittent fan operation considering the overdrying.4. For the continuous fan operation, the average temperature rise of drying air may be limited to 2.2 to 3. 3 degrees Centigrade considering safe storage moisture level of 13.5 to 14 perceut wet basis.5. Required drying time decrease ranged from 40 to 50 percent each time the airflow rate was doubled and from 3.9 to 4.3 percent approximately for each one degrees Centigrade in average temperature rise of drying air regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on required drying time.6. Required drying time increase ranged from 18 to 30 percent approximately for each 2 percent increase in initial moisture content regardless of the fan operation methods, in the range of 18 to 24 percent moisture.7. The intermittent fan operation showed about 36 to 42 percent decrease in required drying time as compared with the continuous fan operation.8. Drymatter loss decrease ranged from 34 to 46 percent each time the airflow rate was doubled and from 2 to 3 percent approximately for each one degrees Centigrade in average temperature rise of drying air, regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on drymatter loss. 9. Drymatter loss increase ranged from 50 to 78 percent approximately for each 2 percent increase in initial moisture content, in the range of 18 to 24 percent moisture. 10. The intermittent fan operation: showed about 40 to 50 percent increase in drymatter loss as compared with the continuous fan operation and the increasing rate was higher at high level of initial moisture and average temperature rise.11. Year-to-year weather conditions had a little effect on required drying time and drymatter loss.12. The equations for estimating time required to dry top layer to 16 and 1536 wet basis and drymatter loss were derived as functions of the performance factors. by the least square method.13. Minimum airflow rates based on 0.5 percent drymatter loss were estimated.Minimum airflow rates for the intermittent fan operation were approximately 1.5 to 1.8 times as much as compared with the continuous fan operation, but a few differences among year-to-year.14. Required fan horsepower and energy for the intermittent fan operation were3. 7 and 1. 5 times respectively as much as compared with the continuous fan operation.15. The continuous fan operation may be more effective than the intermittent fan operation considering overdrying, fan horsepower requirements, and energy use.16. A method for estimating the required collection area of flat-plate solar collector using average temperature rise and airflow rate was presented.

남해 연안 피조개 (Scapharca broughtonii) 양식장의 환경특성 (The effect of geochemical characteristics and environmental factors on the growth of cultured Arkshell Scapharca broughtonii at several shellfish-farming bays on the South coast of Korea)

  • 최윤석;정춘구
    • 한국패류학회지
    • /
    • 제32권3호
    • /
    • pp.149-155
    • /
    • 2016
  • 피조개 양식장의 해수 수온, 염분, pH, DO, 영양염, COD의 조사결과 해역별 편차가 적게 나타났다. 그리고 엽록소 a 농도는 7-8월에 부영양화 기준인 $7{\mu}g/L$ 보다 높게 나타났지만 8월 이후 부영양화 기준보다 낮은 농도를 보였다. 따라서 피조개 양식장에서 서식환경에 의한 생존율의 급감은 여름철 고수온, 낮은 용존산소량과 먹이원인 클로로필의 감소로 인하여 발생되는 것으로 사료된다. 퇴적물의 강열감량 (IL) 과 산휘발성화합물 (AVS) 및 함수율 (WC) 은 유사한 양상을 보이며 큰 차이가 나타나지 않았으며 화학적산소요구량 (COD) 은 거제만의 조사 정점에서 월별 변화가 심하게 나타났다. 퇴적물의 평균입도 (Mz) 는 8.07-8.33 범위를 보였고 분급도는 1.66-2.13 범위로 피조개 양식에 적합한 지역으로 나타났다. 퇴적물의 C/N 비는 양식장에서 5-10 사이의 값을 나타내어 해양기원의 유기물에 의한 것으로 추정되며, C/S 비는 지역에서 2.8 이상으로 유기물이 분해되기 전에 유기물의 급속한 퇴적이 이루어졌을 환경으로 조사 되었다. 중금속에 대한 농집지수 (Igeo) 의 결과는 연구지역이 Igeo class가 0에서 4 사이로 분포되어 있어 오염되지 않았거나 약간오염된 수준으로 (practically unpolluted / moderately polluted) 나타났다.

동해 후포퇴 왕돌초 주변의 정밀해저지형 및 해저면 특성 분석 (Detailed Bathymetry and Seabed Characteristics of Wangdol-cho, Hupo Bank in the East Sea)

  • 김창환;박찬홍
    • 자원환경지질
    • /
    • 제47권5호
    • /
    • pp.533-540
    • /
    • 2014
  • 동해의 주요 어장이고 레저 관광과 동해 해양환경 연구 등에서 매우 중요한 역할을 하고 있는 후포퇴 왕돌초 주변해역에 대한 정밀해저지형을 분석하고, 해저면 영상 자료 및 퇴적물 입도 결과를 이용하여 해저면 특성을 분류하였다. 후포퇴는 동해의 해안선과 평행하게 나타나며 가장 수심이 얕은 지역은 후포항 동쪽에 위치하고 있는 왕돌초 지역이다. 이 왕돌초는 셋잠(북쪽), 중간잠(중간), 맞잠(남쪽)이라는 3개의 봉우리로 구성되어 있다. 세 개의 봉우리 중 가장 수심이 낮은 지역은 중간잠으로 약 6 m의 가장 얕은 수심을 보이고, 북쪽의 셋잠은 약 8 m, 남쪽의 맞잠은 약 9 m의 수심에서 가장 얕은 지역이 나타난다. 왕돌초의 세 봉우리 주변으로는 얕은 해저지형을 보이며 복잡한 지형 기복과 많은 암반들이 산재한다. 그 암반들 사이 및 북동쪽의 평탄면과 급경사면의 서쪽 주변부로는 모래질자갈/자갈질모래 등의 비교적 굵은 조립질 퇴적물이 관측된다. 왕돌초 서쪽으로는 불규칙한 지형보다는 지형 기복이 감소하고 급격한 경사면이 존재하며 후포분지와 연결되는데 이 후포분지 지역은 니질/실트질 모래류의 퇴적물이 나타난다. 왕돌초 주변의 정밀해저지형과 해저면 특성 분석자료는 향후 왕돌초 해역의 해양환경연구 및 생태계의 지속적 이용을 위한 관리에 기여할 것으로 판단된다.

이배체와 삼배체를 교배하여 얻은 이수체의 생장과 과일 특성 (Growth and Fruit Characteristics of Aneuploid Apple Obtained from Crosses between Diploid and Triploid)

  • 장춘화;박성민
    • 생물환경조절학회지
    • /
    • 제18권4호
    • /
    • pp.481-491
    • /
    • 2009
  • 본 연구는 이전에 이배체와 삼배체를 교배하여 얻은 이수체 사과 나무의 생장과 과실 특성을 알아보고자 수행하였다. 이수체 사과나무의 화분발아율, 영양생장, 과실의 특징을 조사하였다. 그 결과, 이수체 사과 나무 간의 화분발아율의 차이가 크고, 모든 이수체 사과 나무의 화분 발아율이 이배체 '홍로' (82.4%) 보다 낮은 것으로 나타났다. 이수체 사과 나무 과실의 평균 크기와 중량은 이배체 '홍로'보다 작고 가벼운 것으로 나타났다. 또한 이수체 사과 나무 과실의 길이와 너비에 의해 이수체 JF3942빼고 다른 이수체 과실의 외형이 조금 납작했다. 거의 모든 이수체 사과 나무 과일의 당 함량은 이배체 '홍로' 보다 높았다. 본 실험에서 얻은 이수체 사과의 산 함량은 이전에 대부분의 연구자의 이배체 사과 결과와 완전히 달랐다. 이수체 사과의 시트르산하고 타르타르산 함량은 사과산 함량보다 더 높은 것으로 나타났다. 이수체 사과 나무의 수고와 폭은 이배체 '홍로'보다 짧았다. 대부분 이수체 사과 나무의 수고는 폭보다 길지만 네 나무는 반대로 나타났다. 잎의 길이와 너비에 의해 이수체 사과 나무 잎의 크기가 이배체 '홍로'보다 작았다. 이수체 사과 나무는 이배체보다 잘 자라지 않는 것으로 나타났다.

한반도 서해남부 임자도 해빈 퇴적작용의 계절적 변화 (Seasonal Variations of Sedimentary Processes on Mesotidal Beach in Imjado, Southwestern Coast of Korea)

  • 류상옥;장진호;조주환;문병찬
    • 한국해양학회지:바다
    • /
    • 제9권3호
    • /
    • pp.83-92
    • /
    • 2004
  • 한반도 서해남부 임자도 해빈에서 퇴적작용의 계절적 변화를 규명하기 위하여 2년 동안 지형 단면과 표층퇴적물, 집적률에 대한 모니터 링을 실시하였다. 해빈 단면은 경사가 급한 해빈면과 비교적 경사가 완만한 중ㆍ저조해빈으로 이루어져 있다. 해빈면의 경사는 여름에 증가하고 겨울에 감소하여 일반적인 해빈의 계절순환 양상과 잘 일치된다. 또 한 중ㆍ저조해빈은 여름에는 파봉과 유흔구조가 잘 발달하는데 반해, 겨울에는 메가 연흔이 잘 발달하는 계절적 변화를 보인다. 해빈 퇴적물은 해빈의 북측에서 남측으로, 그리고 저조선에서 고조선 방향으로 세립해지는 경향을 보인다. 퇴적물의 평균 입도는 북측 해빈에서는 가을과 겨울에 조립해지는데 반해, 남측 해빈에서는 겨울과 봄에 조립해지는 경향을 보인다. 또한 집적률 조사 결과, 북측 해빈은 전체적으로 침식되고 남측 해빈은 퇴적되는 양상을 보인다. 이와 같은 현상은 해빈 퇴적물이 해안선 방향(북동-남서)으로 발달하는 연안류에 의해 해빈을 따라 남쪽으로 이동하기 때문으로 생각된다. 그러나 집적률의 계절적 변화는 매우 복잡할 뿐 아니라 뚜렷한 규칙성을 보이지 않는다. 이는 아마도 인위적 요인에 의한 연안 및 해저지형 변화와 지구온난화에 따른 해수면 상승 등 다양한 요인들에 의해 임자도 해빈의 에너지 수준이 평행상태에 도달하지 못하고 불안정한 상태에 있음을 의미하는 것으로 생각된다.