• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.14 no.4
• /
• pp.217-220
• /
• 1981

A trematode, Cercaria tapidis which is parasitic to short necked clam, Tapes philippinarum was studied in terms of its morphology and incidence of infection rate. The host bivalve was collected from Solri near Gunsan from September 1980 to August 1981. Sporocysts were observed mainly in tissues of gonad of the short necked clams. Minimum infection rate ($0.85\%$) was found in May, while maximum infection rate ($23.27\%$) in December. The sporocyst is 1.1 mm long and 0.27 mm wide. Ellipsoidal body of cercaria is $283{\mu}m$ long and $120{\mu}m$ wide. Oral sucker is much larger than ventral sucker. Moderately small pharynx, a long esophagus, and a long intestine reaching to the posterior end of the body are distinctive. Globular excretory bladder is located at the posterior part of the body and bears numerous granules of various size. The flame-cell arrangement is represented by a formula 2[(3+3+3)+(3+3)]=30. Tail is five times body length.

• Archives of Plastic Surgery
• /
• v.36 no.5
• /
• pp.578-582
• /
• 2009

Purpose: In extensive deep burn of the lower limb, due to less amount of soft tissue, bone is easily exposed. When it happens, natural healing or reconstruction with skin graft only is not easy. Local flap is difficult to success, because adjacent skins are burnt or skin grafted tissues. Muscle flap or free flap are also limited and has high failure rate due to deep tissue damage. The authors acquired good outcome by performing one - stage operation on bone exposed soft tissue defect with AlloDerm$^{(R)}$(LifeCell, USA), an acellular dermal matrix producted from cadaveric skin. Methods: We studied 14 bone exposed soft tissue defect patients from March 2002 to March 2009. Average age, sex, cause of burn, location of wound, duration of admission period, and postoperative complications were studied. We removed bony cortex with burring, until conforming pinpoint bone bleeding. Then rehydrated AlloDerm$^{(R)}$(25 / 1000 inches, meshed type) was applicated on wound, and thin split thickness(6 ~ 8 / 1000 inches) skin graft was done at the immediately same operative time. Results: Average age of patients was 53.6 years(25 years ~ 80 years, SD = 16.8), and 13 patients were male(male : female = 13 : 1). Flame burn was the largest number. (Flame burn 6, electric burn 3, contact burn 4, and scalding burn 1). Tibia(8) was the most affected site. (tibia 8, toe 4, malleolus 1, and metatarsal bone 1). Thin STSC with AlloDerm$^{(R)}$ took without additional surgery in 12 of 14 patients. Partial graft loss was shown on four cases. Two cases were small in size under $1{\times}1cm$, easily healed with simple dressing, and other two cases needed additional surgery. But in case of additional surgery, granulation tissue has easily formed, and simple patch graft on AlloDerm$^{(R)}$ was enough. Average duration of admission period of patients without additional surgery was 15 days(13 ~ 19 days). Conclusion: AlloDerm$^{(R)}$ and thin split thickness skin graft give us an advantage in short surgery time and less limitations in donor site than flap surgery. Postoperative scar is less than in conventional skin graft because of more firm restoration of dermal structure with AlloDerm$^{(R)}$. We propose that AlloDerm$^{(R)}$ and thin split thickness skin graft could be a solution to bone exposured soft tissue defects in extensive deep burned patients on lower extremities, especially when adjacent tissue cannot be used for flap due to extensive burn.

• Journal of Energy Engineering
• /
• v.14 no.4 s.44
• /
• pp.268-276
• /
• 2005

Vacuum Residue (VR) combustion tests were carried out with a 20 kg/hr (fuel feed rate) small scale reactor. The nozzle used was a steam atomized, internal mixing type. Compared to heavy oil, vacuum residue used in this work is extremely high viscous and contains high percentages of sulfur, carbon residue and heavy metals. To ignite atomized VR particles, it was necessary to preheat the reactor, and it has been done with LP gas. The axial and radial gas temperature, major species concentrations and solid sample were analyzed when varying the fuel feed rate. The main reaction zone of atomized VR-air flame in a reactor was anticipated within about 1 m from the burner tip by considering the profiles oi gas temperature, species concentration and particle size measured along with the reactor. At downstream, the thermally, fully developed temperature distribution was obtained. SEM photographs revealed that VR carbon particles collected from the reactor are porous and have many blow-holes on the particle surface.

• The Journal of the Korea Contents Association
• /
• v.13 no.6
• /
• pp.40-47
• /
• 2013

In case of wild fire, early detection of wild fire is the most important factor in minimizing the damages. In this paper, we suggest an effective system that detects wild fire using a panoramic image from a single camera with PAN/TILT head. This enables the system to detect the size and the location of the fire in the early stages. After converting RGB image input to color YCrCb image, the differential image is used to detect changes in movement of the smoke to determine the regions which may be prone to forest fire. Histogram analysis of fire flame is used to determine the possibility of fire in the predetermined regions. In addition, image matching and SURF were used to create the panoramic image. There are many advantages in this system. First of all, it is very economical because this system needs only a single camera and a monitor. Second, it shows the live image of wide view through panoramic image. Third, this system can reduce the quantity of saved data by storing panoramic images.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.13 no.4
• /
• pp.173-178
• /
• 1980

Cercaria larvae of Bacciger harengulae which is parasitic to Meretrix lusoria, rapes japonica and Solen strictus were studied in terms of their morphology and incidence of infection rate. The host bivalves were collected from Naechodo, Okgu-gun during the Period from January to November in 1980. The tail of the cercaria bears 27 pairs of tufts of setae, the tufts being composed of 6 fine rays. Oral sucker, intestine, ventral sucker and a pair of testes are distinctive. The excretory duct bears numerous granules of various size, and the flame-cell arrangement is represented by a formula 2[(3+3)+(3+3)]=24. The cercaria is somewhat similar to the previously known Cercaria pectinata . It is however conformed that present cercaria belongs to Bacciger harengulae. Infection rate showed seasonal variation and host selectivity. Higher infections were observed in Solen strictus, and lower in Meretrix lusoria. Generally, the larger bivalves over 2-3 years old showed the higher infection rate.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.231-235
• /
• 2009

The mainly objectives of this study was a combustion dynamics and instability characteristics in a model dump type combustor which is scale down of GE 7FA+e DLN 2.6 gas turbine combustor with running at Seo-Inchon combined cycle power plant. Model gas turbine injector has 2-stage swirl vane and it's reduced 1/3 size of the original one. The shape of plenum and combustor were designed for similar acoustic characteristics. As the result, this research have been shows the peak frequency of model combustor was changed quarter-wave mode to Helmholtz resonator mode in plenum and longitudinal mode in dump combustor at unstable flame conditions caused by the different of combustor temperature and fuel-air mixture distributions.

• Journal of Trauma and Injury
• /
• v.30 no.4
• /
• pp.145-157
• /
• 2017

Purpose: We accessed epidemioloy of 908 acute burns (7 years) in the military, of injuries and propose proper educational programs to suit community. Methods: We surveyed burn demographics, circumstances of injuries, size, result of treatment. Results: The mean age was 20.6 years. The flame burns (FB) (325, 35.8%) were most common, followed scald (SB) (305, 33.6%), contact (CB) (219, 24.1%), electric (EB) (45, 5.0%) and chemical burns (ChB) (14, 1.5%). The more occurred during winter (29.7%). SB had mean 3.9% total body surface area (TBSA). The 251 (82.3%) had superficial burns by spillage of hot water/food on lower limbs (45.6%), feet (33.8%) in summer (34.8%), treated with simple dressing (92.8%). Morbidity rate was 5.6%; post traumatic stress disease (PTSD) (0.7%). FB had large wound (9.3% TBSA). The 209 (64.3%) had superficial burns by ignition to flammable oils (31.7%) and bomb powders (29.2%) on head/neck (60.3%), hands (58.6%) in summer (31.7%), autumn (30.2%). They underwent simple dressing (83.4%) and skin graft (16.0%). Morbidity rate was 18.8%; PTSD (10.5%), inhalation injuries (4.0%), corneal injury (3.7%), amputations (0.9%), and mortality rate (1.2%). CB had small (1.1% TBSA), deep burns (78.5%) by hotpack (80.4%) on lower limbs (80.4%). The more (59.8%) underwent skin graft. EB had 6.8% TBSA. The 29 (64.4%) had superficial burns by touching to high tension cable (71.1%) on hand (71.1%), upper limbs (24.4%) in autumn (46.8%). They underwent simple dressing (71.1%) and skin graft (24.4%). They showed high morbidity rate (40.0%); loss of consciousness (13.3%), nerve injuries (11.1%), neuropathy (8.9%), amputations (2.2%), and mortality rate (2.2%). Conclusions: The cook should wear apron over the boots during work. The lighter or smoking should be strictly prohibited during work with flammable liquids or bomb powders. Don't directly apply hotpack to skin for a long time. Use insulating glove during electric work. Keep to the basic can prevent severe injury and proper education is important.

• Fire Science and Engineering
• /
• v.12 no.2
• /
• pp.3-15
• /
• 1998

The consequence analysis for jet and flash fire accidents by the continuous release of butane vapor was performed and effects of process variables on consequences were analyzed in standard conditions. For the continuous release (87.8 kg/s) of butane vapor at 8m elevated height in the debutanizing process of the naphtha cracking plant operating at 877 kPa, 346.75 K, we found that for the jet fire accident, shape and size of the flame could be predicted and thermal radiation estimated by API model at 200m distance from release point was 1.5kW/$m^2$, and that for the flash fire accident, effect range was 11.2~120.2m. Also, simulation results showed that effects of operating pressures on consequences were larger than those of operating temperatures and results of accidents were increased with increasing operating pressures. At this time, effects of operating pressures on XUFL were smaller(about 1/10) than those on XLFL for the flash fire accident.

• Architectural research
• /
• v.15 no.3
• /
• pp.151-158
• /
• 2013

Offshore oil and gas process plants are exposed to hazardous accidents such as explosion and fire, so that the structural components should resist such accidental loads. Given the possibilities of thousands of different scenarios for the occurrence of an accidental hazard, the best way to predict a reasonable size of a specific accidental load would be the employment of a probabilistic approach. Having the fact that a specific procedure for probabilistic accidental hazard analysis has not yet been established especially for explosion and fire hazards, it is widely accepted that engineers usually take simple and conservative figures in assuming uncertainties inherent in the procedure, resulting either in underestimation or more likely in overestimation in the topside structural design for offshore plants. The variation in the results of a probabilistic approach is determined by the assumptions accepted in the procedures of explosion probability computation, explosion analysis, and structural analysis. A design overpressure load for a sample offshore plant is determined according to the proposed probabilistic approach in this study. CFD analysis results using a Flame Acceleration Simulator, FLACS_v9.1, are utilized to create an overpressure hazard curve. Moreover, the negative impulse and frequency contents of a blast wave are considerably influencing structural responses, but those are completely ignored in a widely used triangular form of blast wave. An idealistic blast wave profile deploying both negative and positive pulses is proposed in this study. A topside process module and piperack with blast wall are 3D FE modeled for structural analysis using LS-DYNA. Three different types of blast wave profiles are applied, two of typical triangular forms having different impulse and the proposed load profile. In conclusion, it is found that a typical triangular blast load leads to overestimation in structural design.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.4
• /
• pp.339-345
• /
• 2020

This study used a real-scale model experiment to reproduce internal fires in residential buildings such as a multi-dwelling unit, in order to prevent damage caused by tens of thousands of fires witnessed each year and to take measures to cope with them. For experimental conditions, different opening sizes were applied to measure and analyze the heating temperature of the exterior wall. Results drawn are as follow : On top of this, the experimental conditions had whether to install shading and put a shading length differently, before measuring and analyzing the heating temperature of the exterior wall. Subsequent results were drawn as shown below. Based on the maximum temperature, the temperature was lowered as much as around 90℃ at 150mm, around 150℃ or over at 300mm and over 175℃ at 450mm. It also turned out that the difference in maximum temperature dropped by around 180℃ or over. This indicated that the shading installation works well in lowering flame temperature generated by fire spread of the exterior wall.