• Journal of the Korean Wood Science and Technology
• /
• v.41 no.3
• /
• pp.234-246
• /
• 2013

It was found that test piece heated rapidly by 3 kW microwave for 5 minutes satisfies the targeted temperature and the percentage of moisture content, and the highest rate of weight increase is obtained in case of 120 minute immersion in the mixture of phosphates and heterocyclic compounds, from the result of such analysis as: kiln drying schedule, flame retardent by flammability test, insect resistance by termites, and permeability of combined penetrant for the wood after assigning multifunctional finish by immersing conifer structural frame, which is used for the frame work of wooden house and indoor/outdoor finishing in flame retardant and insect repellent materials mixture with the remaining heat of microwave. In addition, after a test of flame retardent treated item, it was identified that every mixture of phosphates corresponds with the standards of flame retardent, and upon investigation of moritality of 7 days after putting termites, it was showed that test piece immersed in the mixture of phosphates and heterocyclic compounds has the best characteristics, showing over 96% of high moritality. From the analysis of inward permeability of combined penetrant for the wood, it was decided that excellent performance in the flame retardent and insect resistance of the wood revealed due to full penetration of combined penetrant as it was found that combined penetrant penetrated through the whole inner cells of the wood.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05d
• /
• pp.69-71
• /
• 2003

Mechanical Properties, such as tensile strength, elongation, and tear strength, decreased according to increasing the load of ATH, volume resistivity, AC break down strength, and tracking resistance for HVI SC contained ATH treated by vinyl Silane were better than those for HVI SC were contained ATH treated by other surface treatment agent, such as stearic acid and acryl silane.

• Journal of the Korean Chemical Society
• /
• v.45 no.4
• /
• pp.341-350
• /
• 2001

Aluminum Hydroxide was employed as a thermal retardent and flame retardent for Chloropolyethylene (CPE) rubbery materials which is the construction material of automotive oil cooler hose. and then cure characteristics, physical properties, thermal resistance and flame retardation of compounded rubber were investigated, and optimum mixing conditions of rubber and flame retarding agent were deduced from the experimental results. CPE rubber material which has excellent properties of chemical corrosion resistance and cold resistance and inexpensive in price was used to prepare rubber specimen. The by-product of ething, produced from the process of surface treatment of aluminum was processed to aluminum hydroxide via crushing and purification, which is characterized by XRD, PSA, SEM and ICP-AES techniques in terms of phase, size, distribution, morphology and components of particles and then mixed to CPE rubber materials in the range of 0~80 phr. Hardness, tensile strength, elongation and thermal properties of compounded rubber specimens were tested. The optimum mixing ratio of rubber to additives to give maximum effect on thermal resistance and flame retardation, within the range of tolerable specification for rubber materials, was determined to be 40 phr. The flame retardation of CPE rubber materials was found to be increased by 5 times at this mixing ratio.

• Journal of the Korean Applied Science and Technology
• /
• v.23 no.1
• /
• pp.77-84
• /
• 2006

Modified polyesters (TTBA-10C, -20C, -30C) that contain phosphorus and chlorine were synthesized by the condensation polymerization of tetramethylene bis(orthophosphate), neohexanediol trichlorobenzoate, 1,4-butanediol and adipic acid, in which tetramethylene bis(orthophosphate) and neohexanediol trichlorobenzoate were prepared previously in our laboratory. In this study, two-component flame-retardant polyurethane coatings (TTBA-10C/HDI-trimer=TTHD-10C, TTBA-20C/ HDI-trimer= TTHD-20C, TTBA-30C/HDI-trimer= TTHD-30C) were obtained by curing at room temperature with the synthesized TTBAs and hexamethylene diisocyanate (HDI)-trimer as a curing agent. The obtained TTHDs were made into coating samples and used as test samples for various physical properties. The physical properties of the flame-retardant coatings containing chlorine and phosphorus groups were generally inferior to those containing only phosphorus group. Flame retardancy was tested by vertical and horizontal combustion method, and $45_{\circ}$ Meckel burner method. Since the retardancy of flame-retardant coatings containing chlorine and phosphorus groups was better than that containing only phosphorus group, it could be concluded that the retardancy by the synergism effect of chlorine and phosphorus groups exhibited.

• Proceedings of the KAIS Fall Conference
• /
• 2009.05a
• /
• pp.372-375
• /
• 2009

반도체 봉지재란 실리콘 칩, 골드와이어, 리드프레임 등의 반도체 소지를 열, 수분, 충격으로부터 보호하기 위해 밀봉하는 재료로서 EMC(Epoxy Moding Compound)가 가장 많이 쓰인다. EMC는 기계적, 전기적 성능향상을 위한 무기재료로 실리카(Silica), 열에 의해 경화되어 3차원 경화구조를 형성하는 에폭시수지, 빠른 경화특성을 부여하기 위한 경화제로서의 페놀수지, 유기재료와 무기재료 사이의 결합력을 높이기 위해 커플링제, 카본블랙, 이형성 확보를 위한 왁스(Wax), 착색제(Colorant), 난연제(Flame Retardant)등의 첨가제로 구성되는 복합소재로써 본 연구에서는 에폭시의 유형에 따른 용융 실리카를 주충진재로 하여 각각의 봉지재의 첨가제를 기준으로 할 때 다양한 형태의 친환경 비할로겐계 반응형 난연제를 합성하는 기술을 개발하고 비 할로겐계 및 Sb 계 첨가형 난연제의 혼용 배합을 통해 친환경 EMC용 난연제의 제조기술을 개발하였다. 이들 EMC의 요구특성은 요구특성은 외부환경으로부터 칩 보호, 칩을 전기적으로 절연특성 유지, 칩의 작동시 발생되는 열의 효과적인 방출 특성 유지, 실장(Board Mounting)의 간편성 특성을 확보해야 하는 특성을 지니고 있어 이들 요구특성에 적합한 특성조사가 함께 이루어졌다.